LVTOPSUN LVTS-512100 51.2V 100Ah 5.12kWh LiFePO4 Battery for Solar IPS

Description

The LVTOPSUN LVTS-512100 51.2V 100Ah 5.12kWh Lithium Iron Phosphate (LiFePO4) Battery is an industrial-grade energy storage solution designed for 48V/51.2V residential solar systems, commercial IPS units, and mission-critical backup installations.

Operating on a 51.2V DC architecture, this unit stores energy harvested directly from solar PV arrays or the utility grid. When grid power cuts occur, its deep-cycle LiFePO4 cells deliver smooth, regulated DC power to off-grid or hybrid inverters with minimal energy conversion loss. An internal electronic Smart Battery Management System (BMS) continuously performs real-time cell balancing, voltage protection, and thermal regulation.

In Bangladesh, where summer ambient temperatures remain high and frequent load shedding stresses conventional battery banks, this 5.12kWh lithium battery provides an ideal solution. It replaces heavy, short-lived lead-acid or tubular batteries with a compact, long-lasting storage unit that easily powers central air conditioners, refrigerators, server racks, and whole-building backups.

Key Features

• Grade-A LiFePO4 Chemistry: Chemically stable, non-toxic cell structure providing maximum thermal endurance and non-combustible safety.
• Smart Electronic BMS: Built-in electronic protective circuitry automatically guards against overcharging, deep discharging, short circuits, and thermal overloads.
• Extended Cycle Life: Delivers over 6,000 cycles at 90% Depth of Discharge (DoD), ensuring 10+ years of active service.
• Multi-Inverter Communication Protocols: Includes RS485, RS232, and CAN communication ports compatible with Deye, Growatt, Victron, Luxpower, and GoodWe inverters.
• High Depth of Discharge (DoD): Allows safe utilization of up to 90% stored capacity without degrading internal cell longevity.
• Compact & Parallelable Design: Space-saving form factor that supports scaling storage capacity by connecting multiple units in parallel.

Technical Advantages

• High Efficiency: Delivers round-trip energy conversion efficiency exceeding 95%, cutting wasted energy from solar panels or grid chargers.
• Durable Construction: Enclosed in a heavy-duty industrial cabinet designed for physical shock protection and thermal dissipation.
• Safety Protection: Advanced BMS safeguards eliminate thermal runaway, internal cell imbalance, and electrical overloads.
• Energy Saving: Rapid charge acceptance drastically shortens charge times, reducing diesel generator fuel usage or grid power draw.
• Easy Maintenance: Fully sealed design that requires zero distilled water topping-up, acid spills handling, or anti-corrosion maintenance.

Applications

• Residential: Rooftop off-grid and hybrid solar IPS setups, apartments, villas, and luxury homes.
• Commercial: Retail superstores, banks, financial branches, IT server rooms, and corporate office workstations.
• Industrial: Automated production line controllers, precision instruments, and emergency industrial backup.
• Factory: Security control hubs, factory floor safety lighting networks, and automated machine drives.
• Office: Workstation power continuity, server racks, network hardware, IP cameras, and telecom hubs.
• Project Installation: Off-grid solar farms, agricultural water pumping projects, and rural electrification initiatives.

Technical Specification Table

Features List

✓ High efficiency operation exceeding 95% round-trip energy efficiency

✓ Advanced Smart BMS with CAN/RS485/RS232 communication interfaces

✓ Long service life delivering 6000+ deep discharge cycles

✓ Floor-stand or wall-mountable easy installation

✓ Low maintenance fully sealed LiFePO4 construction

Benefits For Customers

• Reduces Electricity Cost: Maximizes solar self-consumption and stores off-peak grid energy to offset expensive utility power.
• Improves Operational Reliability: Keeps essential appliances, servers, and air conditioners running smoothly without rebooting during load shedding.
• Saves Maintenance Cost: Sealed, zero-maintenance construction eliminates fluid checks, acid refills, and corrosion cleanups.
• Suitable for Bangladesh Environment: Performs reliably under high ambient room temperatures and withstands multiple daily charge/discharge cycles.

Installation & Maintenance Guide

Installation Requirements

• Position the battery in a clean, well-ventilated, dry indoor location protected from rain and direct sunlight.
• Place the unit on a flat floor stand or mount securely on a reinforced wall using structural anchors.
• Connect to your 48V/51.2V hybrid inverter or charge controller using heavy-gauge, high-purity copper cables with crimped lugs.
• Connect the CAN or RS485 communication wire between the battery BMS and the inverter for accurate charge parameter synchronization.

Maintenance Tips

• Clean the outer cabinet casing using a dry, static-free cloth to prevent dust accumulation near heat vents.
• Periodically check terminal connections to ensure mounting bolts remain properly torqued.
• Avoid leaving the unit fully discharged for extended periods; recharge promptly following deep discharge cycles.

Safety Instructions

• Do not short-circuit positive and negative terminals under any circumstances.
• Keep the battery away from open heat sources, flammable materials, or water submersion.
• Electrical wiring and commissioning must be conducted by a qualified electrician or solar engineer.

FAQ Section

Q: What is the price of LVTOPSUN 51.2V 100Ah 5.12kWh Lithium Battery in Bangladesh?

A: You can find the updated, authentic price for the LVTOPSUN 51.2V 100Ah 5.12kWh battery directly on loopshop.com.bd, featuring official warranty coverage and promotional deals.

Q: Where can I buy LVTOPSUN 51.2V 100Ah 5.12kWh Lithium Battery in Bangladesh?

A: You can purchase it online at loopshop.com.bd with secure payment options, verified technical authenticity, and fast nationwide delivery across Bangladesh.

Q: What warranty does this product have?

A: The LVTOPSUN 51.2V 100Ah battery includes an official 5-Year Manufacturer Warranty covering internal defects and Smart BMS electronics.

Q: Is this suitable for Bangladesh climate?

A: Yes, engineered with an operating temperature tolerance of -20°C to +60°C and an intelligent BMS, it handles warm, humid climates effortlessly.

Q: How to install this product?

A: Mount or place the 47.3 kg unit, wire the DC terminals to a 48V/51.2V hybrid inverter using copper cables, and link the RS485/CAN communication port to the inverter.

Q: Can I run air conditioners on this 5.12kWh lithium battery?

A: Yes, with 100A continuous discharge capacity (over 5kW output), this battery can comfortably run inverter air conditioners, refrigerators, and heavy household loads.

Q: What inverters are compatible with the LVTOPSUN 51.2V 100Ah battery?

A: It seamlessly integrates with leading 48V/51.2V hybrid and off-grid inverter brands including Deye, Victron, Growatt, LuxPower, and GoodWe.

Q: Can I expand storage capacity by adding more batteries?

A: Yes, you can connect multiple LVTOPSUN 51.2V 100Ah units in parallel to expand total energy storage to meet growing power demands.

Q: Does this lithium battery require water top-ups?

A: No, LiFePO4 batteries are completely sealed, zero-maintenance units that require no distilled water or acid replenishment.

Q: How many cycles does the LVTOPSUN 51.2V 100Ah battery offer?

A: The battery offers over 6,000 discharge cycles at 90% Depth of Discharge, providing a service lifespan of 10-15 years under standard daily usage.