Description
The SUNSHINE 220W Germany Cell 12V Mono Bifacial Solar Panel (Model: SS-220W-M-B) is a high-performance dual-sided photovoltaic module engineered for modern off-grid solar power systems. Built with high-purity Germany monocrystalline solar cells, Multi-Busbar (MBB) design, and PID-free technology, it captures direct sunlight on the front surface and reflected light on the rear surface to generate dependable 12V direct current (DC) electricity.
This solar panel is ideal for homeowners, solar IPS users, small businesses, rural setups, and off-grid project installers looking to maximize daily power generation from limited rooftop space. In Bangladesh, where frequent load shedding requires fast battery recharging and tropical weather demands durable modules that perform during cloudy monsoon days, this 220W bifacial module delivers reliable energy output.
Key Features
-
Bifacial Dual-Side Power Generation: Harvests sunlight from both front and rear sides to increase total energy yield over reflective rooftops and ground surfaces.
-
Germany Monocrystalline Cell Technology: High-purity solar cells engineered for superior photon capture and consistent conversion efficiency.
-
Multi-Busbar (MBB) Architecture: Shortens current travel paths within the cells, lowering internal electrical resistance and reducing power loss.
-
PID-Free Protection: Prevents Potential Induced Degradation (PID), ensuring long-term voltage stability and sustained output across years of service.
-
12V Nominal Battery Compatibility: Delivers 18.9V Maximum Power Voltage (Vmp) and 11.64A Maximum Power Current (Imp) for seamless integration with 12V batteries and MPPT or PWM charge controllers.
Technical Advantages
-
Higher Energy Yield: Combining bifacial light capture with MBB cell design generates extra energy per square foot compared to conventional monofacial panels.
-
Harsh Environment Durability: Built with salt mist and ammonia resistance inside a sturdy 1570 × 710 × 35 mm frame for coastal, agricultural, and humid environments.
-
Electrical Safety & Positive Tolerance: Features a 0 ~ +5W positive power tolerance, 1000V maximum system voltage rating, and 20A maximum series fuse protection.
-
Strong Low-Light Performance: Continues generating steady charging current under overcast skies, haze, and early-morning or late-afternoon daylight.
-
Low Maintenance: Solid-state photovoltaic module with no moving parts requires only periodic surface cleaning.
Applications
-
Residential: Home solar IPS systems, rooftop off-grid setups, LED lighting, 12V DC/AC fans, and load-shedding backup battery banks.
-
Commercial: Retail shops, pharmacies, small clinics, and commercial backup battery systems.
-
Industrial: Remote telemetry stations, off-grid security systems, and low-voltage industrial control circuits.
-
Factory: Standalone perimeter lighting and emergency DC backup power.
-
Office: Backup power for routers, computers, emergency lights, and essential office electronics.
-
Project Installation: Rural off-grid electrification projects, river boats, cabins, and hybrid inverter battery arrays.
Why Choose This Product?
-
Reliability: Engineered with PID-free Germany monocrystalline cells and salt-mist/ammonia resistance for dependable long-term outdoor operation.
-
Performance: Delivers 220W rated front power (11.64A Imp) plus rear-side bifacial gain for faster daily 12V battery recharging.
-
Cost Effectiveness: Maximizes power output per panel, reducing total mounting space and hardware requirements for off-grid setups.
-
After-Sales Value: Backed by genuine product sourcing, technical guidance, and nationwide delivery from LOOP Shop (
loopshop.com.bd).
Technical Specification Table
| Specification | Details |
| Model | SS-220W-M-B |
| Brand | SUNSHINE |
| Rated Power | 220W (0 ~ +5W Tolerance) |
| Voltage | 12V Nominal (Vmp: 18.9V, Voc: 22.11V, Max System: 1000V) |
| Current | Imp: 11.64A, Isc: 13.62A |
| Protection | PID-Free, Salt Mist & Ammonia Resistant, Max Series Fuse: 20A |
| Dimension | 1570 × 710 × 35 mm |
| Cell Technology | Germany Monocrystalline Bifacial Cell with Multi-Busbar (MBB) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ Bifacial dual-side sunlight capture for higher power yield
-
✓ High-efficiency Germany monocrystalline solar cells
-
✓ Advanced Multi-Busbar (MBB) design for lower resistance losses
-
✓ PID-free, salt mist, and ammonia resistant durability
-
✓ Reliable low-light performance during cloudy weather
Benefits For Customers
-
Reduces Electricity Cost: Generates clean solar power daily to run home IPS, fans, lights, and small appliances while cutting utility grid bills.
-
Improves Operational Reliability: Recharges 12V backup batteries efficiently with 11.64A current so backup power stays ready during frequent load shedding.
-
Saves Maintenance Cost: Durable 35 mm framed bifacial construction with PID-free protection ensures minimal upkeep over decades.
-
Suitable for Bangladesh Environment: Salt mist resistance, ammonia resistance, and strong low-light efficiency make it ideal for Bangladesh’s coastal zones, rooftops, and monsoon climate.
Installation & Maintenance Guide
Installation Requirements:
-
Mount the panel in a shadow-free location facing south (for Bangladesh) at an optimal tilt angle, leaving open clearance underneath so reflected light can reach the rear bifacial surface.
-
Install over a light-colored or reflective rooftop surface where possible to maximize rear-side bifacial energy gain.
-
Connect the panel to an appropriately rated 12V MPPT or PWM solar charge controller (minimum 15A–20A rating recommended for 11.64A Imp) using UV-resistant DC solar cables.
Maintenance Tips:
-
Clean both the front and rear glass surfaces periodically with water and a soft cloth to remove dust, bird droppings, and debris so bifacial absorption remains unobstructed.
-
Inspect connectors, DC breakers, and mounting bolts regularly to ensure tight, corrosion-free electrical connections.
Safety Instructions:
-
Cover the front surface of the solar panel with an opaque sheet during wiring installation to prevent live DC voltage generation.
-
Never connect the solar panel directly to a battery without a charge controller, ensure proper frame earthing/grounding, and avoid stepping on the glass surface.
FAQ Section
Q: What is the price of SUNSHINE 220W Germany Cell 12V Mono Bifacial Solar Panel in Bangladesh?
A: The price varies depending on market availability and order quantity (typically around BDT 5,900 to 7,000 in Bangladesh). Visit loopshop.com.bd or contact our sales team for the latest updated price.
Q: Where can I buy SUNSHINE 220W Germany Cell 12V Mono Bifacial Solar Panel in Bangladesh?
A: You can purchase the genuine SUNSHINE 220W 12V Mono Bifacial Solar Panel (Model: SS-220W-M-B) directly from LOOP Shop (loopshop.com.bd) with nationwide courier delivery across Bangladesh.
Q: What warranty does this product have?
A: The SUNSHINE SS-220W-M-B is backed by a 25-year linear power output warranty. Please confirm physical and transit inspection guidelines with LOOP Shop support when placing your order.
Q: Is this suitable for Bangladesh climate?
A: Yes, it features salt mist and ammonia resistance, PID-free cells, and strong low-light performance—making it well-suited for Bangladesh’s hot summers, coastal humidity, and cloudy monsoon days.
Q: How to install this product?
A: Secure the 1570 × 710 × 35 mm panel on a south-facing elevated frame free from shading (leaving space beneath for rear light reflection), wire it to a 12V MPPT/PWM charge controller, and connect the controller to your 12V battery.
Q: How does bifacial technology work on this 220W solar panel?
A: Unlike standard single-sided panels, a bifacial solar panel absorbs direct sunlight on its front surface while simultaneously capturing reflected and diffused light on its rear surface to increase total energy generation.
Q: Which solar charge controller should I use with the SUNSHINE SS-220W-M-B?
A: Because this panel outputs 18.9V Vmp and 11.64A Imp (13.62A Isc), pair it with a 12V MPPT or PWM solar charge controller rated at 15A or 20A for safe and efficient battery charging.
Q: Can I use this 220W solar panel with a 12V IPS or inverter system?
A: Yes, it integrates seamlessly with 12V tubular or lithium batteries connected to home solar IPS and off-grid inverter setups.
Q: What does PID-free technology mean for solar panel lifespan?
A: PID-free (Potential Induced Degradation-free) construction prevents voltage-induced power leakage between the solar cells and frame, preserving high conversion efficiency over decades.
Q: What are the dimensions of the SUNSHINE 220W bifacial solar panel?
A: The module measures 1570 × 710 × 35 mm, offering a rigid, weather-resistant frame engineered for rooftop and ground-mount installations.

Reviews
There are no reviews yet.