Description
The SUNSHINE 200W Germany Cell 12V Mono Solar Panel (Model: SS-200W-M) is a high-performance monocrystalline photovoltaic (PV) module engineered for reliable off-grid DC power generation. By combining precision Germany cell technology with Multi-Busbar (MBB) architecture, the module converts sunlight into clean electrical energy with minimal resistive loss and strong voltage stability.
Designed for homeowners, retail shops, agricultural farms, telecom installers, and solar contractors, this 200W panel integrates seamlessly into 12V nominal battery systems. In Bangladesh—where load-shedding, rising electricity tariffs, and off-grid power demands affect daily operations—this module provides an efficient, low-maintenance energy source for charging tubular or LiFePO4 batteries and running essential DC or inverter-backed loads.
Key Features
-
200W Rated Output with Positive Tolerance: Delivers a rated maximum power (Pmax) of 200W with a
0 to +5Wpositive power tolerance to ensure consistent nameplate yield. -
Germany Monocrystalline Cell Technology: High-purity silicon cells deliver superior energy conversion per square meter compared to conventional polycrystalline panels.
-
Multi-Busbar (MBB) Cell Architecture: Shorter current-collection pathways lower internal series resistance, improve fill factor, and limit micro-crack degradation.
-
Optimized 12V System Electricals: Operates at a maximum power voltage (Vmp) of
18.9Vand maximum power current (Imp) of10.58A, pairing smoothly with both PWM and MPPT 12V solar charge controllers. -
Salt Mist, Ammonia & PID Resistance: Built to withstand coastal salinity, agricultural environments, and Potential Induced Degradation (PID) over decades of outdoor exposure.
Technical Advantages
-
High Conversion Efficiency: MBB front-grid geometry minimizes cell shading while enhancing photon capture, producing dependable output even in diffused or low-light conditions.
-
Durable Construction: Encapsulated behind high-transmission tempered glass within a rigid anodized aluminum frame (
1480 × 670 × 30 mm) to endure tropical heat, monsoon rain, and wind loads. -
Certified Safety Protection: Rated Application Class A with a
1500Vmaximum system voltage rating,25Amaximum series fuse rating, and sealed junction box protection against hot-spot damage. -
Long-Term Energy Savings: Generates free daytime electricity that cuts monthly utility expenses and lowers generator fuel consumption.
-
Easy Maintenance: Smooth anti-reflective tempered glass allows rainwater to naturally rinse away surface dust, keeping routine cleaning quick and straightforward.
Applications
-
Residential: Home rooftop solar systems, 12V IPS/inverter battery charging, LED home lighting, and DC ceiling or table fans.
-
Commercial: Retail shops, pharmacies, diagnostic centers, and local businesses requiring uninterrupted backup power.
-
Industrial: Remote SCADA telemetry, perimeter security lighting, and low-voltage sensor stations.
-
Factory: Auxiliary 12V backup lighting, gate automation, and emergency communication systems.
-
Office: Small office backup systems for Wi-Fi routers, POS terminals, laptops, and emergency lighting.
-
Project Installation: Off-grid rural electrification projects, solar street lighting, telecom repeater stations, and livestock/poultry farm installations.
Why Choose This Product?
-
Proven Reliability: PID-free cell protection and salt mist/ammonia resistance ensure stable electrical output in demanding coastal and rural climates.
-
Consistent Real-World Performance: Strong low-light response maintains battery charging efficiency during cloudy days and off-peak sun hours.
-
Cost Effectiveness: High wattage in a single 12V module reduces mounting hardware, wiring, and installation labor costs while backed by a 25-year linear power output warranty.
-
Trusted Local Support: Available across Bangladesh through LoopShop.com.bd with technical sizing assistance and reliable nationwide delivery.
Technical Specification Table
| Specification | Details |
| Model | SS-200W-M |
| Brand | SUNSHINE |
| Rated Power | 200W (Power Tolerance: 0 ~ +5W) |
| Voltage | 12V Nominal (Vmp: 18.9V / Voc: 22.11V / Max System: 1500V) |
| Current | Imp: 10.58A / Isc: 12.38A |
| Frequency | DC Output (0 Hz) |
| Efficiency | Not Available |
| Protection | Class A, PID-Free, Salt Mist & Ammonia Resistant, Max Fuse: 25A |
| Dimension | 1480 × 670 × 30 mm |
| Weight | Not Available |
| Operating Temperature | Not Available |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ High-efficiency monocrystalline Germany cell technology
-
✓ Modern Multi-Busbar (MBB) design for lower internal power loss
-
✓ 200W rated power output with 0 to +5W positive tolerance
-
✓ Excellent low-light and cloudy-weather energy generation
-
✓ Salt mist, ammonia, and PID-free environmental protection
-
✓ Class A safety rating with 25A maximum series fuse support
-
✓ Rigid anodized aluminum frame with tempered glass protection
-
✓ Backed by a 25-year linear power output warranty
Benefits For Customers
-
Reduces Electricity Cost: Converts abundant daytime sunlight into free DC power, lowering monthly grid electricity bills and generator fuel expenses.
-
Improves Operational Reliability: Keeps essential lights, fans, internet routers, and security systems powered during frequent grid outages.
-
Saves Maintenance Cost: Solid-state solar module construction requires no fuel or moving parts, minimizing ongoing maintenance expenses.
-
Suitable for Bangladesh Environment: Engineered with salt mist, ammonia, and PID resistance to perform reliably in coastal districts, high heat, and humid monsoon seasons.
Installation & Maintenance Guide
Installation Requirements
-
Orientation & Tilt: Install the panel facing true south at an optimal tilt angle of 20°–25° to maximize year-round solar irradiance in Bangladesh.
-
Shading Clearance: Position the module in an unobstructed area free from shadows cast by adjacent buildings, trees, water tanks, or parapet walls.
-
Mounting Structure: Anchor the
1480 × 670 × 30 mmaluminum frame securely onto a corrosion-resistant GI or aluminum mounting rack rated for seasonal storms (Kalboishakhi). -
Charge Controller & Cabling: Connect the panel through a properly rated 12V solar charge controller (PWM or MPPT, minimum 15A–20A) using UV-resistant solar DC cables.
Maintenance Tips
-
Routine Glass Cleaning: Rinse and wipe the tempered glass surface every 2 to 4 weeks using clean water and a soft sponge or microfiber cloth to clear dust and bird droppings.
-
Optimal Cleaning Window: Clean early in the morning or after sunset while the glass is cool to avoid thermal stress.
-
Electrical & Mechanical Check: Inspect DC cables, connectors, junction box seals, and mounting bolts every 6 months for secure connections.
Safety Instructions
-
Live DC Voltage Precaution: Solar modules generate live DC electricity whenever exposed to sunlight; cover the front glass with an opaque cloth during wiring or servicing.
-
Correct Polarity: Verify positive (+) and negative (–) terminal polarity before connecting to a solar charge controller or battery bank.
-
Never Connect Directly to Battery: Always use an appropriate 12V charge controller to prevent battery overcharging and reverse current flow.
FAQ Section
Q: What is the price of SUNSHINE 200W Germany Cell 12V Mono Solar Panel in Bangladesh?
A: In Bangladesh, the SUNSHINE 200W Germany Cell 12V Mono Solar Panel typically ranges between ৳5,800 and ৳11,000 depending on stock availability and order volume. Visit LoopShop.com.bd for the latest live price and bulk project discounts.
Q: Where can I buy SUNSHINE 200W Germany Cell 12V Mono Solar Panel in Bangladesh?
A: You can order genuine SUNSHINE SS-200W-M 200W 12V Mono Solar Panels online directly from LoopShop.com.bd with safe packaging and nationwide delivery across Dhaka, Chattogram, Sylhet, Khulna, Rajshahi, and all districts in Bangladesh.
Q: What warranty does this product have?
A: The SUNSHINE 200W Germany Cell 12V Mono Solar Panel comes with a 25-year linear power output warranty for long-term energy reliability.
Q: Is this suitable for Bangladesh climate?
A: Yes. With high-efficiency Germany monocrystalline cells, MBB architecture, salt mist resistance, and ammonia resistance, it performs reliably in Bangladesh’s high temperatures, coastal humidity, and cloudy monsoon weather.
Q: How to install this product?
A: Mount the panel on a south-facing rooftop or ground structure at a 20°–25° tilt angle without shading, then connect the DC output wires to a compatible 12V PWM or MPPT solar charge controller connected to your 12V battery bank.
Q: What is the model number and physical size of this solar panel?
A: The model number is SS-200W-M, and its physical dimensions are 1480 × 670 × 30 mm.
Q: Which solar charge controller is best for the SUNSHINE 200W 12V solar panel?
A: With a maximum power voltage (Vmp) of 18.9V and maximum power current (Imp) of 10.58A, a 15A or 20A 12V PWM or MPPT solar charge controller is ideal.
Q: Can this panel charge a 12V IPS or LiFePO4 battery?
A: Yes. It is built for 12V nominal battery systems and safely charges 12V tubular, lead-acid, gel, and LiFePO4 batteries when paired with an appropriate charge controller.
Q: Can I use this solar panel in coastal areas or poultry farms?
A: Yes. The SUNSHINE SS-200W-M features certified salt mist and ammonia resistance, making it well-suited for coastal regions of Bangladesh as well as agricultural and livestock facilities.
Q: Can multiple SUNSHINE 200W 12V panels be connected together?
A: Yes. Multiple units can be connected in parallel to increase charging amperage for a 12V system, or wired in series to build a 24V or 48V solar array using a compatible MPPT charge controller.

Reviews
There are no reviews yet.