Description
The REC Alpha Pro M Bifacial 610W (Model: REC610AA Pro MG) is a next-generation photovoltaic module engineered with advanced Heterojunction (HJT) cell technology. HJT combines the strengths of crystalline silicon wafers with ultra-thin amorphous silicon layers, dramatically lowering internal electron recombination and eliminating Light-Induced Degradation (LID). Built in a dual-glass bifacial architecture with 120 half-cut cells, the module captures direct sunlight on the front while harvesting reflected albedo radiation through the rear glass.
Designed for commercial enterprises, industrial manufacturing facilities, EPC contractors, and utility-scale solar developers, this panel solves critical energy challenges in Bangladesh. Rising commercial grid tariffs, daytime peak demand, and high roof temperatures require modules that maintain high voltage and current under real tropical operating conditions. The REC Alpha Pro M 610W delivers superior daily kilowatt-hour (kWh) generation and accelerated return on investment.
Key Features
-
610W Rated Power & 86% Bifaciality: Delivers 610Wp under Standard Test Conditions (STC) and up to 681Wp under Bifacial Nameplate Irradiance (BNPI) with a 0 to +10W positive sorting tolerance.
-
Advanced Heterojunction (HJT) Cells: Zero Light-Induced Degradation (LID), high open-circuit voltage stability, and strong low-light responsiveness during early mornings and overcast monsoon weather.
-
REC Iconic Twin Design: Splits the panel into two independent twin sections, lowering internal electrical resistance and maintaining energy generation even when one half experiences partial shading.
-
Solder-Free Cell Connection: Uses dense, thin multi-wire connections instead of high-temperature soldering, preventing thermal stress and micro-cracks during transport and installation.
-
2.0 + 2.0 mm Dual-Glass Construction: Anti-reflective coated front glass and white-grid rear glass resist moisture ingress, salt mist, ammonia, and Potential Induced Degradation (PID).
-
1500V DC System Compatibility: Allows longer PV strings to reduce DC cabling, combiner box, and installation labor costs.
Technical Advantages
-
High Efficiency & Bifacial Gain: Achieves 21.5% front-side efficiency (215 W/m² power density) alongside an 86% ± 5% bifaciality factor for substantial rear-side energy harvesting.
-
Durable Construction: Features a 30 mm anodized silver aluminum frame with reinforced support bars capable of withstanding extreme mechanical loads up to 5400 Pa front snow/static load and 2400 Pa rear wind load.
-
Safety & Thermal Protection: Equipped with an IP68-rated 3-part junction box housing 3 bypass diodes, a 35A maximum series fuse rating, and an ultra-low -0.24%/°C temperature coefficient that preserves power when module temperatures climb.
-
Energy Saving: Superior low-light and high-temperature yield maximizes daytime solar self-consumption and Bangladesh Net Metering export credits.
-
Easy Maintenance: Smooth anti-reflective front glass sheds rainwater cleanly and simplifies periodic dust washing during dry winter months.
Applications
-
Commercial: Shopping complexes, hospitals, hotels, universities, and corporate buildings reducing daytime peak electricity expenses.
-
Industrial & Factory: Garment (RMG) factories, textile mills, cold storages, and steel/cement plants with large RCC or steel-shed rooftops.
-
Office: Corporate headquarters and IT parks seeking reliable, clean daytime power generation.
-
Project Installation: Ground-mounted utility solar power plants, solar irrigation systems, and large-scale EPC projects.
-
Residential: High-consumption multi-story residential complexes with reinforced mounting structures and high-current MPPT inverters.
Why Choose This Product?
-
Reliability: Certified to IEC 61215:2021, IEC 61730:2023, UL 61730, IEC 61701 (Salt Mist), and IEC 62716 (Ammonia Resistance), engineered for decades of harsh outdoor service.
-
Performance: Outperforms conventional PERC and standard TOPCon modules in hot climates due to its -0.24%/°C temperature coefficient and zero LID loss.
-
Cost Effectiveness: High 610W module output reduces mounting hardware, DC cabling, and installation time per kilowatt installed.
-
After-Sales Value: Supported by REC’s 20-year product warranty and 30-year linear power warranty with just 2% first-year degradation and 0.25% annual degradation thereafter—retaining at least 90.75% of original power at Year 30.
Technical Specification Table
| Specification | Details |
| Model | REC610AA Pro MG (Alpha Pro M Bifacial) |
| Brand | REC Group |
| Rated Power | 610W (STC) / 681W (BNPI) |
| Voltage | Vmp: 36.3V | Voc: 44.4V | Max System Voltage: 1500V DC |
| Current | Imp: 16.81A | Isc: 17.56A | Max Series Fuse Rating: 35A |
| Frequency | DC Output Module (Inverter-dependent AC frequency) |
| Efficiency | 21.5% |
| Protection | IP68 3-Part Junction Box (3 Bypass Diodes), 5400Pa Front / 2400Pa Rear Load, IEC 61701 Salt Mist & IEC 62716 Ammonia Compliant |
| Dimension | 2175 × 1305 × 30 mm (2.84 m²) |
| Weight | 36.8 kg |
| Operating Temperature | -40°C to +70°C (NMOT: 44 ± 2°C | Temp. Coefficient Pmax: -0.24%/°C) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 610W high-efficiency Heterojunction (HJT) bifacial operation (21.5% efficiency)
-
✓ Ultra-low -0.24%/°C temperature coefficient for hot climates
-
✓ Zero Light-Induced Degradation (LID) with solder-free cell connections
-
✓ REC Twin Design for improved output under partial shading
-
✓ Advanced protection system with IP68 junction box and 1500V DC rating
-
✓ 2.0 + 2.0 mm dual-glass build with 30-year linear performance warranty
Benefits For Customers
-
Reduces Electricity Cost: Generates high daytime kWh yield to cut expensive commercial and industrial grid bills and maximize Bangladesh Net Metering returns.
-
Improves Operational Reliability: Twin-section architecture and solder-free HJT cells prevent micro-cracks and keep power flowing during partial roof shading.
-
Saves Maintenance & BOS Cost: High 610W density reduces total panel count, mounting steel, DC wiring, and ongoing cleaning labor.
-
Suitable for Bangladesh Environment: Dual-glass encapsulation, salt-mist/ammonia resistance, and superior heat tolerance withstand coastal humidity, industrial pollution, and intense summer heat.
Installation & Maintenance Guide
Installation Requirements:
-
Mount on an anodized aluminum or hot-dip galvanized steel racking frame engineered for local wind loads, tilted south at approximately 20°–23° for Bangladesh.
-
To maximize the 86% rear-side bifacial gain (up to 681W BNPI), install the modules on an elevated open rack above a white-coated or light-colored roof surface and avoid blocking the rear glass with mounting rails.
-
Confirm your inverter MPPT tracker supports high input currents (Imp: 16.81A / Isc: 17.56A — pair with inverters rated for ≥18A–20A per string) and verify series string Voc (44.4V × panel count) stays safely below the inverter’s maximum DC voltage limit.
Maintenance Tips:
-
Wash the front anti-reflective glass every 2 to 4 weeks during Bangladesh’s dry season (November–April) using soft water and a non-abrasive microfiber wiper to remove dust and bird droppings.
-
Clean early in the morning or after sunset when the glass surface is cool to prevent thermal shock.
-
Inspect PV-JM608 / MC4 connectors, 4mm² solar DC cables, and frame clamps every 6 months for tightness and weather integrity.
Safety Instructions:
-
Solar modules generate lethal DC voltage whenever exposed to light; cover the front glass with an opaque sheet during electrical wiring or servicing.
-
Never disconnect MC4 connectors under load.
-
Properly ground all aluminum frames and metallic mounting structures according to BNBC (Bangladesh National Building Code) and IEC safety standards.
FAQ Section
Q: What is the price of REC Alpha Pro M Bifacial 610W Heterojunction Solar Panel in Bangladesh?
A: The price of the REC Alpha Pro M Bifacial 610W (REC610AA Pro MG) solar panel in Bangladesh depends on order volume (single unit vs. pallet/project quantity) and current import exchange rates. Contact loopshop.com.bd directly for the latest retail or commercial project quotation.
Q: Where can I buy REC Alpha Pro M Bifacial 610W Heterojunction Solar Panel in Bangladesh?
A: You can purchase genuine REC Alpha Pro M Bifacial 610W solar panels online from loopshop.com.bd with safe nationwide delivery across Dhaka, Chattogram, Gazipur, Narayanganj, Sylhet, Khulna, and all districts in Bangladesh.
Q: What warranty does this product have?
A: The REC Alpha Pro M Bifacial 610W comes with a 20-year product warranty covering materials and workmanship, plus a 30-year linear performance warranty guaranteeing at least 90.75% of nominal power output at Year 30 (with only 0.25% annual degradation after Year 1).
Q: Is this suitable for Bangladesh climate?
A: Yes. Its ultra-low temperature coefficient of -0.24%/°C ensures minimal power drop during intense summer heat, while 2.0 + 2.0 mm dual-glass construction, IP68 junction boxes, and salt-mist/ammonia certifications protect against monsoon humidity and coastal or industrial environments.
Q: How to install this product?
A: Have a certified solar engineer mount the panel on a corrosion-resistant frame tilted south at 20°–23° over a reflective surface, wire strings using 4mm² UV-resistant DC solar cables, pair with high-current MPPT inverters (≥18A per string), and properly ground all frames.
Q: What is Heterojunction (HJT) technology in the REC Alpha Pro M 610W panel?
A: Heterojunction (HJT) combines crystalline silicon with ultra-thin amorphous silicon layers. This eliminates Light-Induced Degradation (LID), improves low-light sensitivity, and achieves a superior -0.24%/°C temperature coefficient compared to standard PERC or TOPCon panels.
Q: How much extra power does the bifacial design generate?
A: With an 86% ± 5% bifaciality factor, the rear side boosts total power up to 681W under BNPI test conditions, typically generating 5% to 20% additional real-world energy depending on roof albedo and mounting height.
Q: What inverter current rating is required for the REC610AA Pro MG?
A: Because the module has a Maximum Power Current (Imp) of 16.81A and Short-Circuit Current (Isc) of 17.56A, it must be paired with modern high-current MPPT inverters rated for at least 18A to 20A per string to avoid current clipping.
Q: Is this panel suitable for Bangladesh Net Metering projects?
A: Yes, its high 610W output, 1500V DC rating, and slow 0.25%/year degradation make it a bankable, high-yield choice for commercial and industrial Net Metering systems in Bangladesh.
Q: What are the physical dimensions and weight of one REC 610W panel?
A: Each module measures 2175 × 1305 × 30 mm (2.84 m²) and weighs 36.8 kg, requiring two technicians for safe lifting and mounting.

Reviews
There are no reviews yet.