REC REC610AA Pro M 610W HJT Mono Solar Panel for Commercial Power

  • High-Output Commercial & Industrial Solar Module: Delivers 610W rated power using next-generation Heterojunction (HJT) monocrystalline cell technology for commercial, industrial, and utility-scale PV installations in Bangladesh.

  • Superior High-Temperature Performance: Features an industry-leading temperature coefficient of -0.24%/°C and 21.5% module efficiency, minimizing power loss during Bangladesh’s hot summer months.

  • Zero Light-Induced Degradation (LID): Solder-free cell interconnection and HJT chemistry eliminate initial LID power drop and enhance low-light energy harvesting.

  • Heavy-Duty Structural Reliability: Built with 120 half-cut cells, an IP68-rated 3-part junction box, and a reinforced anodized aluminum frame (5400 Pa front / 2400 Pa rear load capacity).

  • Long-Term ROI & Warranty: Retains at least 92% of nameplate power at Year 25 under REC’s 25-year performance warranty, lowering Balance of System (BOS) and electricity costs.

Best Price Guaranteed

Description

The REC Alpha Pro M 610W Heterojunction Mono Solar Panel (Model: REC610AA Pro M) is a high-efficiency photovoltaic (PV) module combining crystalline N-type silicon wafers with thin-film amorphous silicon layers. This Heterojunction (HJT) architecture captures a broader spectrum of solar radiation while drastically reducing electron recombination losses.

Engineered specifically for factory rooftops, commercial buildings, cold storages, agricultural irrigation projects, and utility-scale solar plants, this 610W module supports 1500V DC string architectures. In Bangladesh—where industrial electricity tariffs are rising, factory roof space is valuable, and high ambient temperatures reduce conventional PERC panel output—the REC Alpha Pro M 610W maximizes kilowatt-hour yield per square meter while accelerating return on investment.

Key Features

  • 610W High-Power Density (21.5% Efficiency): Generates 610 Wp (with 0/+10W positive power tolerance) across a 2.84 m² footprint, reducing the total number of panels, rails, and clamps needed per megawatt.

  • Advanced Heterojunction (HJT) Cell Technology: Merges monocrystalline and amorphous silicon layers to deliver superior conversion efficiency, zero Light-Induced Degradation (LID), and enhanced low-light generation.

  • Ultra-Low Temperature Coefficient (-0.24%/°C): Retains significantly more wattage when rooftop temperatures climb above 40°C compared to standard P-type or TOPCon modules.

  • REC Twin Design & Solder-Free Interconnection: Splits the 120 half-cut cells into two independent twin sections with multi-wire solder-free connections to eliminate micro-cracks and maintain power output under partial shading.

  • 1500V DC System Compatibility: Rated for 1500V maximum system voltage (Vmp: 36.3V, Voc: 44.3V, Imp: 16.81A, Isc: 17.72A), enabling longer strings and lower BOS cabling costs in large C&I projects.

Technical Advantages

  • High Efficiency & Low-Light Yield: Captures diffused sunlight effectively during early mornings, late afternoons, and overcast monsoon skies in Bangladesh.

  • Durable Construction: Features anti-reflective solar glass, support bars behind the frame (2175 × 1305 × 30 mm, 32.5 kg), 5400 Pa front snow/wind load rating, 2400 Pa rear wind load rating, and 35 mm hail impact resistance.

  • Certified Safety & Ingress Protection: Equipped with a 3-part IP68-rated junction box containing 3 bypass diodes, Stäubli MC4 EVO2 / PV-JM608 connectors, and a 35A maximum series fuse rating.

  • Maximum Energy & Cost Savings: Higher power per panel lowers per-watt racking, installation labor, and DC wiring costs while generating more clean electricity under Bangladesh’s Net Metering guidelines.

  • Low Maintenance Design: Anti-reflective glass surface resists dirt accumulation and cleans easily with routine water rinsing.

Applications

  • Residential: High-capacity residential rooftop on-grid and hybrid solar systems with limited roof area.

  • Commercial: Shopping malls, hospitals, hotels, universities, and cold storage facilities.

  • Industrial: Heavy manufacturing plants, steel/cement facilities, and utility-scale ground-mounted solar farms.

  • Factory: Ready-Made Garment (RMG) and textile factory rooftops operating under Net Metering policies.

  • Office: Corporate headquarters, banks, and IT parks seeking reliable daytime peak-load shaving.

  • Project Installation: Utility-scale solar parks, solar irrigation pump stations, and commercial EPC turnkey projects.

Why Choose This Product?

  • Proven Reliability: Manufactured by REC Group (Singapore) with solder-free HJT cells and reinforced frame support bars for long-term mechanical and electrical stability.

  • Superior Tropical Performance: Industry-leading -0.24%/°C thermal behavior ensures higher real-world energy generation during Bangladesh’s hot summer afternoons.

  • Long-Term Cost Effectiveness: Guaranteed minimum 92% power output at Year 25 (only 0.25% annual degradation after Year 1), protecting long-term project cash flows.

  • Dedicated Local Support: Sourced for Bangladesh EPC contractors and businesses through LoopShop.com.bd with technical string-sizing consultation and nationwide project logistics.

Technical Specification Table

Specification Details
Model REC610AA Pro M
Brand REC
Rated Power 610W (Power Tolerance: 0 / +10W)
Voltage Vmp: 36.3V / Voc: 44.3V / Max System Voltage: 1500V DC
Current Imp: 16.81A / Isc: 17.72A
Frequency DC Output (0 Hz)
Efficiency 21.5%
Protection IP68 Junction Box (3 Bypass Diodes), Max Series Fuse: 35A, IEC 61215 / IEC 61730 / IEC 62716
Dimension 2175 × 1305 × 30 mm
Weight 32.5 kg
Operating Temperature -40°C to +85°C (NOCT: 44°C ± 2°C)
Warranty Official Manufacturer Warranty Applicable.

 Features List

  • ✓ 610W high-output Heterojunction (HJT) monocrystalline solar module

  • ✓ 21.5% module conversion efficiency with 0 to +10W positive tolerance

  • ✓ Ultra-low -0.24%/°C temperature coefficient for hot climates

  • ✓ Zero Light-Induced Degradation (LID) and solder-free cell connections

  • ✓ REC Twin Design for improved partial-shading resilience

  • ✓ 1500V DC maximum system voltage for commercial and utility strings

  • ✓ Reinforced anodized aluminum frame rated up to 5400 Pa front load

  • ✓ IP68-rated 3-part junction box with 3 bypass diodes

  • ✓ 25-year performance warranty guaranteeing at least 92% output in Year 25

Benefits For Customers

  • Reduces Electricity Cost: Maximizes daytime solar generation per square foot of roof space, cutting industrial grid bills and accelerating Net Metering payback.

  • Improves Operational Reliability: HJT cells and Twin Design maintain high voltage and current stability even during extreme summer heat or partial rooftop shading.

  • Saves Installation & BOS Cost: High 610W output per module reduces mounting structures, DC cables, connectors, and installation labor hours.

  • Suitable for Bangladesh Environment: Engineered to withstand high ambient temperatures (-40°C to +85°C), heavy monsoon rains, and cyclonic wind loads (5400 Pa front / 2400 Pa rear).

Installation & Maintenance Guide

Installation Requirements

  • Orientation & Tilt: Install modules facing true south at an optimal tilt angle of 15°–25° for commercial rooftops or ground mounts in Bangladesh to maximize annual yield.

  • Structural & Wind Load Compliance: Mount the 2175 × 1305 × 30 mm (32.5 kg) modules onto heavy-duty hot-dip galvanized steel or anodized aluminum racking engineered for coastal/cyclone wind speeds.

  • Inverter & String Sizing: Verify string open-circuit voltage (Voc: 44.3V) and operating current (Imp: 16.81A, Isc: 17.72A) against your on-grid or hybrid inverter MPPT limits (ensure MPPT supports ≥17A–20A input current).

  • Grounding & Surge Protection: Bond all module frames to a dedicated earthing system and install DC/AC Surge Protection Devices (SPDs) and 35A-rated string fuses/breakers.

Maintenance Tips

  • Scheduled Surface Cleaning: Clean the anti-reflective solar glass every 2 to 4 weeks using clean, low-mineral water and a soft brush or microfiber mop to remove industrial dust and soot.

  • Thermal-Safe Cleaning Timing: Perform water washing early in the morning or after sunset when module glass temperatures are low.

  • Biannual System Inspection: Inspect MC4 connectors, DC string cables, earthing lugs, and mid/end mounting clamps every 6 months for tightness and corrosion-free integrity.

Safety Instructions

  • High-Voltage DC Hazard: A single module outputs 44.3V Voc and series strings can reach up to 1500V DC; only qualified solar engineers should perform DC string connections using insulated tools.

  • Never Disconnect Under Load: Always isolate the inverter AC and DC disconnects before unplugging MC4 connectors to prevent dangerous DC arc flash.

  • Proper Handling: Carry the 32.5 kg panel using two technicians holding the aluminum frame—never lift by the junction box or cables, and never walk on the glass surface.

 FAQ Section

Q: What is the price of REC Alpha Pro M 610W Heterojunction Mono Solar Panel in Bangladesh?

A: The price of the REC Alpha Pro M 610W Heterojunction Mono Solar Panel in Bangladesh varies depending on import lot, exchange rates, and commercial project quantity (typically around ৳15,500 to ৳19,500 per panel). Contact LoopShop.com.bd for live retail pricing and bulk EPC quotations.

Q: Where can I buy REC Alpha Pro M 610W Heterojunction Mono Solar Panel in Bangladesh?

A: You can purchase genuine REC Alpha Pro M 610W (REC610AA Pro M) solar panels online at LoopShop.com.bd with nationwide project delivery across Dhaka, Chattogram, Gazipur, Narayanganj, Savar, Sylhet, Khulna, and Rajshahi.

Q: What warranty does this product have?

A: The REC Alpha Pro M 610W carries a 20-year product warranty (upgradable to 25 years under the REC ProTrust program when installed by an REC Certified Solar Professional) and a 25-year linear power output warranty guaranteeing at least 92% output at Year 25.

Q: Is this suitable for Bangladesh climate?

A: Yes. With its ultra-low -0.24%/°C temperature coefficient, -40°C to +85°C operating temperature range, IP68 junction box, and 5400 Pa mechanical load rating, it performs exceptionally well in Bangladesh’s hot summers and heavy monsoon seasons.

Q: How to install this product?

A: Mount the panels on a south-facing galvanized steel or aluminum structure at a 15°–25° tilt, wire them in series strings matched to a commercial string or hybrid inverter MPPT (supporting ≥17A input current), and complete proper DC earthing and SPD protection.

Q: What is the exact model number, size, and weight of this REC 610W panel?

A: The exact model code is REC610AA Pro M. Each module measures 2175 × 1305 × 30 mm (2.84 m²) and weighs 32.5 kg.

Q: What makes Heterojunction (HJT) better than standard PERC or TOPCon solar panels?

A: HJT cells combine monocrystalline silicon with amorphous thin-film layers to eliminate Light-Induced Degradation (LID), deliver a lower temperature coefficient (-0.24%/°C), and generate more power in hot and low-light conditions.

Q: Which inverters are compatible with the REC Alpha Pro M 610W solar panel?

A: Because its maximum power current (Imp) is 16.81A and short-circuit current (Isc) is 17.72A, it should be paired with modern commercial string or hybrid inverters whose MPPT channels accept at least 17A–20A per string.

Q: Can this panel be used for Net Metering rooftop projects in Bangladesh?

A: Yes. High-efficiency REC Alpha Pro M 610W modules are ideal for commercial and industrial rooftop Net Metering installations where maximizing kW capacity per square foot of roof space is critical.

Q: Where is the REC Alpha Pro M 610W solar panel manufactured?

A: REC Alpha Pro M modules are engineered by REC Group (Norwegian solar brand) and manufactured in REC’s automated facility in Singapore.

Reviews

There are no reviews yet.

Be the first to review “REC REC610AA Pro M 610W HJT Mono Solar Panel for Commercial Power”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581