LVTOPSUN LVTS-128280-E 12.8V 280Ah LiFePO4 Battery for Solar & UPS

  • High-Capacity Energy Storage: Delivers 12.8V 280Ah (3.584kWh / 3584Wh) nominal power with 2.86kWh usable capacity at 80% Depth of Discharge (DoD) and a 6,000+ cycle lifespan.

  • Rugged IP54 ABS Enclosure: Built with a compact, non-conductive, moisture-resistant ABS case (387 × 206 × 269 mm, 27 kg) engineered for safe indoor and cabinet installations.

  • High-Current Smart BMS: Supports up to 150A fast charging and 200A continuous discharging (up to 2560W load), protected against overcharge, deep discharge, and short circuits.

  • Ideal for Bangladesh Power Conditions: Operates reliably across wide ambient temperatures (-20°C to 60°C) and frequent daily load-shedding cycles across Bangladeshi homes, offices, and telecom sites.

  • Maintenance-Free & Expandable: Zero distilled water refills or acid leaks, with flexible series/parallel expansion up to 4 units.

Best Price Guaranteed

Description

The LVTOPSUN LVTS-128280-E is an ultra-high-capacity 12.8V 280Ah (3.584kWh) Lithium Iron Phosphate (LiFePO4) deep-cycle battery housed in a heavy-duty, IP54-rated ABS casing. Engineered as a direct, high-efficiency drop-in replacement for large 12V tubular and lead-acid battery banks, it stores 3584Wh of nominal energy (2.86kWh usable at 80% DoD) in a compact 27 kg footprint.

During grid availability or peak solar generation, the battery charges rapidly at up to 150A (Bulk Charge 14.0V / Float 13.8V). During power outages, its integrated Smart Battery Management System (BMS) regulates steady DC output up to 200A continuous discharge (400A short-term peak), ensuring uninterrupted backup for inverters and UPS systems. It is specifically built for homeowners, solar EPC installers, IT administrators, and commercial operators in Bangladesh seeking extended backup runtime during prolonged load-shedding.

Key Features

  • 12.8V 280Ah (3.584kWh) Energy Capacity: Provides 2.86kWh usable energy at 80% DoD with a 6,000+ cycle lifespan (at 0.5C, 25°C).

  • Heavy-Duty IP54 ABS Case: Non-conductive, rust-proof, and impact-resistant ABS enclosure (387 × 206 × 269 mm) protects internal cells from dust and humidity.

  • High Charge & Discharge Performance: Supports up to 150A maximum charge current and 200A continuous discharge current (400A peak; approx. 2,000A short-circuit protection).

  • Built-in Smart BMS Protection: Automatically balances internal LiFePO4 cells and guards against over-voltage, under-voltage (11.6V cutoff), over-current, short circuits, and thermal extremes.

  • Series & Parallel Scalability: Allows connecting up to 4 units in series (for 24V, 36V, or 48V banks) or up to 4 units in parallel (up to 1120Ah / 14.33kWh at 12.8V).

Technical Advantages

  • Superior Round-Trip Efficiency (>95%): Cobalt-free LiFePO4 chemistry minimizes internal resistance and energy loss during solar charging and inverter discharge.

  • Durable Enclosure Construction: The sealed IP54 ABS case prevents moisture ingress (up to 95% RH) and eliminates external corrosion compared to metal cabinets.

  • Intrinsic Chemical & Electronic Safety: Lithium Iron Phosphate chemistry resists thermal runaway, reinforced by multi-tier electronic BMS protection cutoffs.

  • 100% Maintenance-Free Operation: Sealed solid-state design eliminates distilled water top-ups, acid spillage, terminal sulfation, and corrosive gas emissions.

  • Deep-Cycle Longevity: Rated for 6,000+ cycles at 80% DoD, outlasting conventional lead-acid and tubular batteries by several times in daily cycling applications.

Applications

  • Residential: Whole-home IPS/UPS backup systems, hybrid/off-grid rooftop solar storage, and multi-hour load-shedding backup.

  • Commercial: Retail showrooms, clinics, diagnostic centers, banks, and ATMs requiring silent, zero-emission backup power.

  • Industrial: PLC automation panels, instrumentation backup, and emergency DC control systems.

  • Factory: Uninterrupted power for CCTV surveillance networks, biometric access control, and server rooms.

  • Office: IT server racks, network switches, routers, and high-capacity office UPS setups.

  • Project Installation: Off-grid solar mini-grids, telecom base stations, and remote renewable energy projects.

Why Choose This Product?

  • Maximum Backup in a Single 12V Unit: With 3.584kWh of stored energy and 200A continuous discharge (2560W), a single unit replaces multiple bulky lead-acid batteries while saving floor space.

  • Consistent Voltage Performance: Maintains a flat discharge voltage profile around 12.8V, preventing premature inverter low-voltage shutdowns and protecting sensitive electronics.

  • Long-Term Cost Savings: Over 6,000 cycles and zero maintenance dramatically reduce per-cycle energy costs compared to replacing tubular batteries every 2–3 years.

  • Trusted Warranty & Local Support: Backed by a 5 to 6-year official manufacturer warranty (per LVTOPSUN terms) and dependable after-sales guidance from loopshop.com.bd.

Technical Specification Table

Specification Details
Model LVTS-128280-E
Brand LVTOPSUN
Rated Power 2560W Continuous Output (3.584kWh / 3584Wh Nominal Energy; 2.86kWh Usable @ 80% DoD)
Voltage 12.8V Nominal (Operating: 11.6V–14.0V; Bulk Charge: 14.0V; Float: 13.8V; Cutoff: 11.6V)
Current Max Charge: 150A / Max Continuous Discharge: 200A (Peak: 400A short-term; Short-Circuit: ≈2,000A)
Frequency DC System (0 Hz — Compatible with 50Hz/60Hz Inverters)
Efficiency >95% Round-Trip Efficiency (LiFePO4 Chemistry, 6,000+ Cycles @ 80% DoD, 25°C, 0.5C)
Protection IP54 Enclosure + Smart BMS (Over-charge, Over-discharge, Over-current, Short-circuit & Temperature protection)
Dimension 387 × 206 × 269 mm (W × H × D)
Weight 27 kg
Operating Temperature -20°C to 60°C (Storage: -20°C to 45°C; Humidity: ≤95% RH; Natural Convection Cooling)
Warranty Official Manufacturer Warranty Applicable.

Features List

  • ✓ 12.8V 280Ah (3.584kWh) LiFePO4 deep-cycle battery with 6,000+ cycles @ 80% DoD

  • ✓ Rugged IP54-rated, non-conductive, rust-proof ABS enclosure (27 kg)

  • ✓ 150A max charge current & 200A continuous discharge current (2560W)

  • ✓ Integrated Smart BMS with full electrical and thermal protection

  • ✓ Scalable up to 4 units in series or 4 units in parallel

  • ✓ 100% maintenance-free drop-in upgrade for 12V tubular/lead-acid banks

Benefits For Customers

  • Reduces Electricity Waste: >95% round-trip efficiency and 150A fast charge acceptance store maximum solar and grid power with minimal charging losses.

  • Improves Operational Reliability: 200A continuous discharge capacity and steady 12.8V output keep IPS/UPS inverters running smoothly without early voltage drop-offs.

  • Saves Maintenance & Replacement Cost: 6,000+ cycle lifespan and sealed zero-maintenance construction eliminate distilled water purchases and repeated battery replacements.

  • Built for Bangladesh Environment: Wide -20°C to 60°C operating temperature range and IP54 moisture-resistant ABS housing withstand Bangladesh’s heat, humidity, and daily power cuts.

Installation & Maintenance Guide

Installation Requirements:

  • Place the battery upright on a sturdy, level, well-ventilated indoor surface or rack away from direct sunlight and heat sources.

  • Configure your inverter, IPS, or solar charge controller charging parameters to 14.0V Bulk Charge, 13.8V Float Charge, and 11.6V Low-Voltage Cutoff.

  • Use properly rated heavy-duty copper battery cables (sized for up to 200A discharge current) and torque terminal bolts securely.

Maintenance Tips:

  • Periodically inspect battery terminal bolts to confirm tight, clean connections free of dust or loose contacts.

  • Wipe the exterior ABS casing with a dry or slightly damp cloth; avoid harsh chemical solvents.

  • For long-term storage, maintain a 50%–60% state of charge in a cool, dry place (-20°C to 45°C) and recharge every 3 to 6 months.

Safety Instructions:

  • Never short-circuit the positive (+) and negative (-) terminals (short-circuit protection triggers at approx. 2,000A).

  • Do not puncture, crush, disassemble, or expose the ABS housing to open flames or excessive heat.

  • When wiring up to 4 units in series or parallel, ensure all batteries are identical models balanced to the same voltage prior to connection.

FAQ Section

Q: What is the price of LVTOPSUN LVTS-128280-E 12.8V 280Ah Battery in Bangladesh?

A: In Bangladesh, the LVTOPSUN LVTS-128280-E typically retails between ৳51,500 and ৳63,600 depending on current stock, import batches, and ongoing promotions. Check loopshop.com.bd for the latest real-time price.

Q: Where can I buy LVTOPSUN LVTS-128280-E in Bangladesh?

A: You can purchase the genuine LVTOPSUN LVTS-128280-E 12.8V 280Ah ABS Case Battery online at loopshop.com.bd with fast delivery across Dhaka, Chattogram, and nationwide across Bangladesh.

Q: What warranty does this product have?

A: The LVTOPSUN LVTS-128280-E comes with a 5 to 6-year official manufacturer warranty (depending on importer/catalog batch terms). Confirm exact warranty card coverage with loopshop.com.bd at checkout.

Q: Is this suitable for Bangladesh climate?

A: Yes. Built with an IP54 sealed ABS case, ≤95% RH humidity tolerance, natural convection cooling, and a -20°C to 60°C operating temperature range, it performs reliably in Bangladesh’s hot, humid climate and daily load-shedding conditions.

Q: How to install this product?

A: Position the 27 kg battery on a dry, level rack, connect positive and negative terminals to a compatible 12V inverter or solar charge controller using heavy-gauge copper cables, and set charging voltages to 14.0V bulk / 13.8V float.

Q: How much energy does the LVTOPSUN LVTS-128280-E store?

A: At 12.8V nominal voltage and 280Ah capacity, it stores 3.584kWh (3584Wh) nominal energy, delivering 2.86kWh of usable energy at 80% Depth of Discharge (DoD).

Q: What is the maximum inverter load this battery can run?

A: With a 200A continuous discharge rating at 12.8V, a single unit supports up to 2560W of continuous DC load (and up to 400A short-term surge).

Q: How many charge cycles does the LVTS-128280-E offer?

A: It is engineered for 6,000+ cycles at 80% Depth of Discharge (DoD) (tested at 25°C, 0.5C), delivering years of daily backup service.

Q: Can I connect multiple LVTS-128280-E batteries in series or parallel?

A: Yes. You can connect up to 4 units in series (for 24V, 36V, or 48V banks) or up to 4 units in parallel (up to 1120Ah / 14.33kWh at 12.8V).

Q: What are the physical dimensions and weight of this battery?

A: The battery measures 387 × 206 × 269 mm (W × H × D) and weighs 27 kg, offering high energy density in a compact, corrosion-free ABS casing.

Reviews

There are no reviews yet.

Be the first to review “LVTOPSUN LVTS-128280-E 12.8V 280Ah LiFePO4 Battery for Solar & UPS”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581