Description
The LVTOPSUN LVTS-128200-E is a high-capacity 12.8V 200Ah (2.56kWh) Lithium Iron Phosphate (LiFePO4) deep-cycle battery housed in a heavy-duty, IP54-rated ABS casing. Designed as a direct, high-efficiency replacement for bulky 12V tubular and lead-acid battery banks, it stores 2560Wh of clean, dependable electrical energy.
During grid availability or peak solar generation, the battery charges rapidly at up to 100A (Bulk Charge 14.0V / Float 13.8V). During power outages, its integrated Smart Battery Management System (BMS) regulates steady DC power delivery up to 200A continuous discharge (400A short-term peak), ensuring seamless operation for inverters and UPS units. It is tailored for homeowners, solar EPC contractors, IT administrators, and commercial businesses in Bangladesh requiring long-duration backup power for heavy load-shedding schedules.
Key Features
-
12.8V 200Ah (2.56kWh) Energy Capacity: Provides 2560Wh nominal energy with 6,000+ deep cycles at 80% Depth of Discharge (DoD, 25°C, 0.5C).
-
Heavy-Duty IP54 ABS Case: Non-conductive, rust-proof, and impact-resistant ABS enclosure (520 × 168 × 210 mm) protects internal cells from dust and humidity.
-
High Charge & Discharge Performance: Supports 100A maximum charge current and 200A continuous discharge current (approx. 2000A short-circuit protection).
-
Built-in Smart BMS Protection: Automatically balances internal LiFePO4 cells and guards against over-voltage, under-voltage (11.6V cutoff), over-current, short circuits, and thermal stress.
-
Series & Parallel Scalability: Allows connecting up to 4 units in series (for 24V, 36V, or 48V banks) or up to 4 units in parallel (up to 800Ah / 10.24kWh).
Technical Advantages
-
Superior Round-Trip Efficiency (>95%): Cobalt-free LiFePO4 chemistry minimizes internal resistance and energy loss during solar charging and inverter discharge.
-
Durable Enclosure Construction: The sealed IP54 ABS case prevents moisture ingress (up to 95% RH) and eliminates external corrosion compared to painted metal cabinets.
-
Intrinsic Chemical & Electronic Safety: Lithium Iron Phosphate chemistry resists thermal runaway, reinforced by multi-tier electronic BMS protection cutoffs.
-
100% Maintenance-Free Operation: Sealed solid-state design eliminates distilled water top-ups, acid spillage, terminal sulfation, and toxic gas emissions.
-
Deep-Cycle Longevity: Rated for 6,000 cycles at 80% DoD, outperforming conventional lead-acid and tubular batteries by several times in daily cycling applications.
Applications
-
Residential: Whole-home IPS/UPS backup systems, hybrid/off-grid rooftop solar storage, and multi-hour load-shedding backup.
-
Commercial: Retail showrooms, clinics, diagnostic labs, banks, and ATMs requiring silent, zero-emission backup power.
-
Industrial: PLC automation panels, instrumentation backup, and emergency DC control systems.
-
Factory: Uninterrupted power for CCTV surveillance networks, biometric access control, and server rooms.
-
Office: IT server racks, networking switches, routers, and high-capacity office UPS setups.
-
Project Installation: Off-grid solar mini-grids, telecom base stations, and remote renewable energy projects.
Why Choose This Product?
-
Built for Heavy Backup Loads: With a 200A continuous discharge rating (up to 2560W at 12.8V), a single unit powers larger home and office inverters without strain.
-
Stable Voltage Output: Maintains a flat discharge voltage profile around 12.8V, ensuring appliances and inverters operate reliably until the battery reaches cutoff.
-
Long-Term Cost Savings: Over 6,000 cycles and zero maintenance dramatically reduce per-cycle energy costs compared to replacing lead-acid batteries every 2–3 years.
-
Trusted Warranty & Local Support: Backed by a 5 to 6-year manufacturer warranty (per official LVTOPSUN terms) and dependable after-sales guidance from loopshop.com.bd.
Technical Specification Table
| Specification | Details |
| Model | LVTS-128200-E |
| Brand | LVTOPSUN |
| Rated Power | 2560W Continuous Output (2.56kWh / 2560Wh Nominal Stored Energy) |
| Voltage | 12.8V Nominal (Bulk Charge: 14.0V; Float Charge: 13.8V; Cutoff Voltage: 11.6V) |
| Current | Max Charge: 100A / Max Continuous Discharge: 200A (Peak: 400A short-term; Short-Circuit: ≈2000A) |
| Frequency | DC System (0 Hz — Compatible with 50Hz/60Hz Inverters) |
| Efficiency | >95% Round-Trip Efficiency (LiFePO4 Chemistry, 6,000 Cycles @ 80% DoD, 25°C, 0.5C) |
| Protection | IP54 Enclosure + Smart BMS (Over-charge, Over-discharge, Over-current, Short-circuit & Temperature protection) |
| Dimension | 520 × 168 × 210 mm (W × D × H) |
| Weight | 20–26 kg (Catalog standard: 26 kg; batch net weight varies between 20–26 kg) |
| Operating Temperature | -20°C to 60°C (Storage: -20°C to 45°C; Humidity: ≤95% RH; Max Altitude: ≤2000m) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 12.8V 200Ah (2.56kWh) LiFePO4 deep-cycle battery with 6,000+ cycles @ 80% DoD
-
✓ Rugged IP54-rated, non-conductive, rust-proof ABS enclosure
-
✓ 100A fast charge current & 200A continuous discharge current (2560W)
-
✓ Integrated Smart BMS with full electrical and thermal protection
-
✓ Scalable up to 4 units in series or 4 units in parallel
-
✓ 100% maintenance-free drop-in upgrade for 12V tubular/lead-acid batteries
Benefits For Customers
-
Reduces Electricity Waste: >95% round-trip efficiency and 100A charge acceptance capture maximum solar and grid power with minimal heat loss.
-
Improves Operational Reliability: 200A continuous discharge capacity and steady 12.8V output prevent premature inverter shutdowns under heavy household or office loads.
-
Saves Maintenance & Replacement Cost: 6,000-cycle lifespan and sealed zero-maintenance construction eliminate distilled water purchases and repeated battery replacements.
-
Built for Bangladesh Environment: Wide -20°C to 60°C operating temperature range and IP54 moisture-resistant ABS housing withstand Bangladesh’s heat, humidity, and daily power cuts.
Installation & Maintenance Guide
Installation Requirements:
-
Place the battery upright on a sturdy, dry, well-ventilated indoor surface or rack away from direct sunlight and heat sources.
-
Set your inverter, IPS, or solar charge controller charging parameters to 14.0V Bulk Charge, 13.8V Float Charge, and 11.6V Low-Voltage Cutoff.
-
Use properly rated heavy-duty copper battery cables (sized for up to 200A discharge current) and torque terminal bolts securely.
Maintenance Tips:
-
Periodically check battery terminal bolts to confirm tight, clean connections free of dust or loose contacts.
-
Wipe the exterior ABS casing with a dry or slightly damp cloth; avoid harsh chemical cleaners.
-
If storing the battery unused, maintain a 50%–60% state of charge in a cool, dry place (-20°C to 45°C) and recharge every 3 to 6 months.
Safety Instructions:
-
Never short-circuit the positive (+) and negative (-) terminals (short-circuit protection triggers at approx. 2000A).
-
Do not puncture, crush, disassemble, or expose the ABS housing to open flames or excessive heat.
-
When wiring up to 4 units in series or parallel, ensure all batteries are identical models balanced to the same voltage prior to connection.
FAQ Section
Q: What is the price of LVTOPSUN LVTS-128200-E 12.8V 200Ah Battery in Bangladesh?
A: In Bangladesh, the LVTOPSUN LVTS-128200-E typically retails between ৳43,000 and ৳52,000 depending on current stock, import batches, and ongoing offers. Check loopshop.com.bd for the latest updated price.
Q: Where can I buy LVTOPSUN LVTS-128200-E in Bangladesh?
A: You can buy the genuine LVTOPSUN LVTS-128200-E 12.8V 200Ah ABS Case Battery online from loopshop.com.bd with fast delivery across Dhaka, Chattogram, and nationwide across Bangladesh.
Q: What warranty does this product have?
A: The LVTOPSUN LVTS-128200-E includes a 5 to 6-year official manufacturer warranty (depending on importer/catalog batch terms). Confirm exact warranty card terms with loopshop.com.bd before ordering.
Q: Is this suitable for Bangladesh climate?
A: Yes. Built with an IP54 sealed ABS case, ≤95% RH humidity tolerance, and a -20°C to 60°C operating temperature range, it performs reliably in Bangladesh’s hot, humid weather and frequent load-shedding conditions.
Q: How to install this product?
A: Position the battery on a dry, level rack, connect positive and negative terminals to a compatible 12V inverter or solar charge controller using heavy-gauge copper cables, and configure charging voltages to 14.0V bulk / 13.8V float.
Q: How much energy does the LVTOPSUN LVTS-128200-E store?
A: At 12.8V nominal voltage and 200Ah capacity, it stores 2.56kWh (2560Wh) of electrical energy.
Q: What is the maximum inverter load this battery can run?
A: With a 200A continuous discharge rating at 12.8V, a single unit supports up to 2560W of continuous DC load (and up to 400A short-term surge).
Q: How many charge cycles does the LVTS-128200-E offer?
A: It is engineered for 6,000+ cycles at 80% Depth of Discharge (DoD) (tested at 25°C, 0.5C), delivering years of daily backup service.
Q: Can I connect multiple LVTS-128200-E batteries in series or parallel?
A: Yes. You can connect up to 4 units in series (for 24V, 36V, or 48V systems) or up to 4 units in parallel (up to 800Ah / 10.24kWh at 12.8V).
Q: What are the dimensions and weight of this battery?
A: The battery measures 520 × 168 × 210 mm (W × D × H) and weighs approximately 20 to 26 kg (26 kg catalog rating), making it significantly lighter and easier to handle than equivalent 200Ah tubular batteries.

Reviews
There are no reviews yet.