Luminous NXG 2350 1600W 24V Pure Sine Wave Solar Hybrid IPS UPS

  • High-Capacity 24V Solar Hybrid Backup: Delivers clean 2000VA / 1600W Pure Sine Wave AC power on a dual-battery (2 x 12V) 24V DC system with an integrated solar charge controller.

  • Intelligent Solar Savings (iSOT): Prioritizes rooftop solar PV power over grid electricity to charge batteries and run connected loads, reducing daily grid power bills.

  • Built for Bangladesh Grid Conditions: Operates across a wide AC input window (90V–290V) and handles frequent load shedding across urban and semi-urban areas.

  • 3 User-Settable Priority Modes: Switch easily between Solar, Solar + Grid, and Grid + Solar modes alongside Tubular, Flat Plate, and SMF/VRLA battery support.

  • Comprehensive Electronic Protection: Safeguards connected devices and internal circuitry against overload, short circuit, over-temperature, and deep discharge.

Best Price Guaranteed

Description

The Luminous NXG 2350 is a microprocessor-controlled 2000VA (1600W) 24V Pure Sine Wave Solar Hybrid IPS and Home UPS inverter equipped with an in-built solar charge controller. Operating on two 12V batteries wired in series (24V DC), it intelligently blends solar PV energy and utility grid electricity to supply clean AC power to connected appliances while maintaining optimal battery charge.

It is designed for larger residences, retail showrooms, clinics, and office operators who require high-wattage 24V backup power alongside lower monthly electricity bills. Across Bangladesh—where frequent load shedding, rising utility tariffs, and wide voltage fluctuations (90V–290V AC) disrupt daily routines—the Luminous NXG 2350 maximizes daytime solar energy utilization while keeping a reliable dual-battery reserve ready for grid outages.

Key Features

  • 2000VA / 1600W Rated Output Capacity: Comfortably powers multiple ceiling fans, LED lights, a television, Wi-Fi router, and essential office or household electronics within its 1600W rating.

  • Pure Sine Wave Output: Delivers smooth, low-distortion AC power safe for sensitive electronics and inductive motors.

  • In-Built Solar Charge Controller with iSOT: Integrates solar optimization and load-sharing logic to prioritize solar energy and reduce grid electricity draw.

  • 24V Dual-Battery Architecture: Operates on two 12V batteries connected in series, supporting Tubular, Flat Plate, and SMF/VRLA battery chemistries.

  • 3 User-Selectable Saving Modes: Configure Solar, Solar + Grid, or Grid + Solar priority modes to match local outage schedules and energy-saving targets.

  • Wide Mains Input Voltage Range (90V–290V): Tolerates severe grid voltage swings without excessive battery discharge.

  • Digital LCD Display & Protections: Displays solar generation, mains, and battery statistics alongside overload, short-circuit, over-temperature, and deep-discharge protection.

Technical Advantages

  • Intelligent Solar & Load Sharing: Dynamically balances daytime loads between solar PV panels and the utility grid, reducing grid dependency and extending battery backup reserve.

  • Clean Waveform for Sensitive Appliances: Pure sine wave output prevents motor hum in ceiling fans and protects power supplies in routers, laptops, and desktop computers.

  • Lower DC Current Stress on 24V Bus: A 24V series battery bank reduces DC current draw at 1600W output compared to 12V systems, minimizing cable heating and supporting efficient conversion.

  • High Solar Panel Compatibility: Supports up to 2000Wp of 24V-class solar PV modules with an integrated 55A solar charge controller.

  • Clear Diagnostics & Low Maintenance: Multi-parameter digital LCD readouts and solid-state electronic protection simplify daily monitoring and upkeep.

Applications

  • Residential: Multi-bedroom apartments, duplex homes, and family residences running ceiling fans, LED lights, televisions, and Wi-Fi routers with rooftop solar support.

  • Commercial: Retail shops, pharmacies, diagnostic centers, and POS billing counters.

  • Industrial: Light workshop control desks, testing benches, and auxiliary lighting circuits.

  • Factory: Administrative offices, security cabins, and small monitoring stations.

  • Office: Small-to-medium offices, workstations, networking routers, and CCTV surveillance setups.

  • Project Installation: Off-grid and hybrid solar backup retrofits for classrooms, telecom repeaters, and security hubs.

Why Choose This Product?

  • Proven Brand Engineering: Manufactured by Luminous Power Technologies, a trusted name in solar and power backup systems.

  • High Output + Daily Bill Savings: Combines a 1600W pure sine wave IPS with an integrated solar charge controller to reduce grid dependency during sunny hours.

  • Adaptable Operating Modes: Three user-selectable priority modes plus ECO/UPS selection let you optimize for maximum solar savings or maximum battery readiness.

  • Local Purchase & Support: Available through loopshop.com.bd with convenient online ordering and customer support in Bangladesh.

Technical Specification Table

Specification Details
Model NXG 2350 (NXG 2350e / 24V)
Brand Luminous
Rated Power 1600 W (2000 VA class)
Voltage 24V DC (2 x 12V Batteries in Series) / 90V–290V AC Mains Input
Current Solar Charge Controller: 55A
Frequency 50 Hz
Efficiency Pure Sine Wave Output
Protection Overload, Short Circuit, Over-Temperature, Deep Discharge, Reverse Polarity
Dimension 32.0 x 27.5 x 15.0 cm (320 x 275 x 150 mm)
Weight 18.5 kg
Operating Temperature Indoor Ambient Operation
Warranty Official Manufacturer Warranty Applicable.

Features List

  • ✓ 2000VA / 1600W pure sine wave output on a 24V dual-battery system

  • ✓ In-built 55A solar charge controller with solar priority optimization

  • ✓ Supports up to 2000Wp 24V solar PV panels

  • ✓ 3 user-selectable priority modes: Solar, Solar + Grid, and Grid + Solar

  • ✓ Compatible with two 12V Tubular, Flat Plate, and SMF/VRLA batteries in series

  • ✓ Wide grid input acceptance range (90V–290V AC) with low-voltage charging

  • ✓ Digital LCD display with overload, short-circuit, over-temperature, and deep-discharge protection

Benefits For Customers

  • Lowers Monthly Electricity Bills: Intelligent solar prioritization uses rooftop solar power first to charge the battery bank and run daytime appliances.

  • Protects Sensitive Electronics: Pure sine wave output keeps ceiling fans, routers, laptops, and LED TVs running quietly without electrical hum or resets.

  • Handles Bangladesh Voltage Fluctuations: Wide mains operating window (90V–290V) maintains reliable performance even when grid voltage drops.

  • Flexible Mode Control: Switch easily between maximum solar savings and grid-assisted charging depending on weather and load shedding.

Installation & Maintenance Guide

Installation Requirements:

  • Install the inverter indoors on a dry, level surface or dual-battery trolley in a well-ventilated room with at least 15 cm of clearance around cooling vents.

  • Connect two compatible 12V batteries of matching rating and condition in series to form a 24V DC bank using heavy-gauge copper battery cables with clean, tight terminal lugs.

  • Connect 24V-compatible solar panels (up to 2000Wp within the inverter’s supported input voltage window) through a DC MCB/isolator with correct positive (+) and negative (-) polarity.

  • Configure the battery-type selector and operating priority mode (Solar / Solar + Grid / Grid + Solar) before powering on.

  • Connect the AC mains input to a properly earthed wall socket or MCB-protected line and wire only approved backup loads to the output.

Maintenance Tips:

  • Clean dust and bird droppings from rooftop solar panels monthly using water and a soft cloth to maintain peak solar charging efficiency.

  • Inspect battery terminals, the series interconnect cable, and solar DC connections every 2 to 3 months for corrosion or loose lugs and keep them clean and secure.

  • For flooded Tubular or Flat Plate batteries, check electrolyte levels monthly across both batteries and top up strictly with distilled water.

  • Wipe dust from the inverter cabinet and cooling vents with a dry cloth so airflow remains unobstructed.

Safety Instructions:

  • Always verify DC polarity (+ and -) and 24V series wiring for the battery bank and solar PV array before making connections.

  • Never exceed the inverter’s supported solar PV array capacity (up to 2000Wp) or input voltage limits.

  • Do not connect heavy high-wattage appliances such as air conditioners, geysers, electric irons, microwaves, or water pumps beyond the inverter’s rated load capacity.

  • Switch off the inverter and isolate solar PV, AC mains, and battery terminals before performing any wiring work or servicing.

FAQ Section

Q: What is the price of Luminous NXG 2350 in Bangladesh?

A: Prices for the Luminous NXG 2350 Solar Hybrid IPS Inverter in Bangladesh generally range between BDT 22,500 and BDT 26,500 for the inverter unit alone, depending on current import pricing and seller stock. Please check the current price listed on loopshop.com.bd for the latest offer.

Q: Where can I buy Luminous NXG 2350 in Bangladesh?

A: You can buy the genuine Luminous NXG 2350 online in Bangladesh directly from loopshop.com.bd, with delivery available across Dhaka, Chattogram, Sylhet, Khulna, Rajshahi, and all districts.

Q: What warranty does this product have?

A: The Luminous NXG 2350 inverter unit comes with a 24-month (2-year) warranty covering manufacturing defects and internal electronic faults. Check the product warranty terms at purchase for coverage details.

Q: Is this suitable for Bangladesh climate?

A: Yes. With a wide 90V–290V AC grid operating range, built-in solar charging, and ventilated indoor enclosure, it is well suited for Bangladesh’s warm weather, abundant sunlight, and frequent load-shedding conditions.

Q: How to install this product?

A: Place the inverter in a ventilated indoor spot, wire two 12V batteries in series to form a 24V DC bank with matching + and - polarity, wire compatible 24V solar panels (up to 2000Wp) through a DC isolator, set the battery type and operating mode switches, and connect AC input and backup load wiring. Professional electrician installation is recommended.

Q: Can the Luminous NXG 2350 work without solar panels at first?

A: Yes. It functions as a standard 24V Pure Sine Wave IPS/UPS using utility grid charging, allowing you to add solar panels later whenever ready.

Q: What is the maximum solar panel capacity supported by the NXG 2350?

A: It supports up to 2000Wp of solar PV panels on a 24V system through its built-in 55A solar charge controller.

Q: Are the batteries and solar panels included in the price?

A: No, the inverter unit is listed separately unless a specific bundle is stated on the product page. Two compatible 12V batteries (wired in series for 24V) and solar panels are purchased separately.

Q: What battery types can be used with Luminous NXG 2350?

A: It supports two 12V Tubular, Flat Plate, and SMF/VRLA batteries wired in series.

Q: Can I run Wi-Fi routers and computers on this solar IPS?

A: Yes. Its pure sine wave output is designed to support Wi-Fi routers, desktop computers, laptops, ceiling fans, and LED lights within the 1600W rating.

Reviews

There are no reviews yet.

Be the first to review “Luminous NXG 2350 1600W 24V Pure Sine Wave Solar Hybrid IPS UPS”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581