Description
The Luminous NXG 1850 is a microprocessor-controlled 1500VA (1250W) 24V Pure Sine Wave Solar Hybrid IPS and Home UPS inverter equipped with an integrated solar charge controller. Operating on two 12V batteries connected in series (24V DC), it intelligently blends solar PV energy and utility grid electricity to supply clean AC power to connected appliances while maintaining optimal battery charge.
It is designed for larger residences, retail showrooms, clinics, and office operators who require high-wattage 24V power backup alongside lower monthly electricity bills. Across Bangladesh—where frequent load shedding, rising utility tariffs, and wide voltage fluctuations (90V–290V AC) disrupt daily work and comfort—the Luminous NXG 1850 maximizes daytime solar energy utilization while keeping a reliable dual-battery reserve ready for grid outages.
Key Features
-
1500VA / 1250W Rated Output Capacity: Comfortably powers multiple ceiling fans, LED lights, a television, Wi-Fi router, and essential office electronics within its 1250W rating.
-
Pure Sine Wave Output: Delivers smooth, low-distortion AC power safe for sensitive electronics and inductive motors.
-
In-Built Solar Charge Controller with iSOT: Integrates Intelligent Solar Optimization Technique (iSOT) and Intelligent Load Sharing (ILS) to prioritize solar energy and reduce grid electricity draw.
-
24V Dual-Battery Architecture: Operates on two 12V batteries wired in series, supporting Tubular, Flat Plate, and VRLA/GEL battery chemistries.
-
3 User-Selectable Saving Modes: Configure Solar, Solar + Grid, or Grid + Solar priority modes to match local outage schedules and energy-saving goals.
-
Wide Mains Input Voltage Range (90V–290V): Tolerates severe grid voltage swings without excessive battery discharge.
-
Digital LCD Display & Protections: Shows real-time solar charging, mains, and battery statistics alongside overload, short-circuit, over-temperature, and deep-discharge protection.
Technical Advantages
-
Intelligent Solar & Load Sharing: Dynamically balances daytime loads between solar PV panels and the utility grid, reducing grid dependency and extending battery backup reserve.
-
Clean Waveform for Sensitive Appliances: Pure sine wave output prevents motor hum in ceiling fans and protects power supplies in routers, laptops, and desktop computers.
-
Lower DC Current Stress on 24V Bus: A 24V series battery bank reduces DC current draw at 1250W output compared to 12V systems, minimizing cable heating and supporting efficient conversion.
-
High Solar Panel Compatibility: Supports up to 1500Wp of 24V-class solar PV modules (36V–60V Voc) with a built-in 40A–50A PWM solar charge controller.
-
Clear Diagnostics & Low Maintenance: Multi-parameter digital LCD readouts and solid-state electronic protection simplify daily monitoring and upkeep.
Applications
-
Residential: Multi-bedroom apartments, duplex homes, and family residences running ceiling fans, LED lights, televisions, and Wi-Fi routers with rooftop solar support.
-
Commercial: Retail shops, pharmacies, diagnostic centers, and POS billing counters.
-
Industrial: Light workshop control desks, testing benches, and auxiliary lighting circuits.
-
Factory: Administrative offices, security cabins, and small monitoring stations.
-
Office: Small-to-medium offices, workstations, networking routers, and CCTV surveillance setups.
-
Project Installation: Off-grid and hybrid solar backup retrofits for classrooms, telecom repeaters, and security hubs.
Why Choose This Product?
-
Proven Brand Engineering: Manufactured by Luminous Power Technologies, a trusted name in solar and power backup systems.
-
High Output + Daily Bill Savings: Combines a 1250W pure sine wave IPS with an integrated solar charge controller to reduce grid dependency during sunny hours.
-
Adaptable Operating Modes: Three user-selectable priority modes let you optimize for maximum solar savings or maximum grid-backed battery readiness.
-
Local Purchase & Support: Available through loopshop.com.bd with convenient online ordering and customer support in Bangladesh.
Technical Specification Table
| Specification | Details |
| Model | NXG 1850 (NXG 1850e / NXG 1850 24V) |
| Brand | Luminous |
| Rated Power | 1250 W (1500 VA class) |
| Voltage | 24V DC (2 x 12V Batteries in Series) / 230V ± 10V AC Output / Solar Voc: 36V–60V DC |
| Current | Solar Controller: 40A–50A / Mains Charging: 0A / 15A / 20A (Mode Dependent) |
| Frequency | 50 Hz ± 0.5 Hz |
| Efficiency | >80% (Battery Mode) |
| Protection | Overload, Short Circuit, Over-Temperature, Low Battery, Deep Discharge |
| Dimension | 32.0 x 27.5 x 15.0 cm (320 x 275 x 150 mm) |
| Weight | 15.0 kg – 17.1 kg (Variant Dependent) |
| Operating Temperature | Indoor Ambient Operation (0°C to 45°C Typical) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 1500VA / 1250W pure sine wave output on a 24V dual-battery system
-
✓ In-built 40A–50A solar charge controller with Intelligent Solar Optimization Technique (iSOT)
-
✓ Supports up to 1500Wp 24V solar PV panels (36V–60V Voc)
-
✓ 3 user-selectable priority modes: Solar, Solar + Grid, and Grid + Solar
-
✓ Compatible with two 12V Tubular, Flat Plate, and VRLA/GEL batteries in series
-
✓ Wide grid input acceptance range (90V–290V AC) with low-voltage charging
-
✓ Digital LCD display with overload, short-circuit, over-temperature, and deep-discharge protection
Benefits For Customers
-
Lowers Monthly Electricity Bills: Intelligent solar prioritization uses rooftop solar power first to charge the battery bank and run daytime appliances.
-
Protects Sensitive Electronics: Pure sine wave output keeps ceiling fans, routers, laptops, and LED TVs running quietly without electrical hum or resets.
-
Handles Bangladesh Voltage Fluctuations: Wide mains operating window (90V–290V) maintains reliable performance even when grid voltage drops.
-
Flexible Mode Control: Switch easily between maximum solar savings and grid-assisted charging depending on weather and load shedding.
Installation & Maintenance Guide
Installation Requirements:
-
Install the inverter indoors on a dry, level surface or dual-battery trolley in a well-ventilated room with at least 15 cm of clearance around cooling vents.
-
Connect two compatible 12V batteries of matching rating and condition in series to form a 24V DC bank using heavy-gauge copper battery cables with clean, tight terminal lugs.
-
Connect 24V-class solar panels (within the 36V–60V Voc and up to 1500Wp limit) through a DC MCB/isolator with correct positive (
+) and negative (-) polarity. -
Configure the battery-type selector and operating priority mode (Solar / Solar + Grid / Grid + Solar) before powering on.
-
Connect the AC mains input to a properly earthed wall socket or MCB-protected line and wire only approved backup loads to the output.
Maintenance Tips:
-
Clean dust and bird droppings from rooftop solar panels monthly using water and a soft cloth to maintain peak solar charging efficiency.
-
Inspect battery terminals, the series interconnect cable, and solar DC connections every 2 to 3 months for corrosion or loose lugs and keep them clean and secure.
-
For flooded Tubular or Flat Plate batteries, check electrolyte levels monthly across both batteries and top up strictly with distilled water.
-
Wipe dust from the inverter cabinet and cooling vents with a dry cloth so airflow remains unobstructed.
Safety Instructions:
-
Always verify DC polarity (
+and-) and 24V series wiring for the battery bank and solar PV array before making connections. -
Never exceed the specified solar PV open-circuit voltage (Voc 36V–60V).
-
Do not connect heavy high-wattage appliances such as air conditioners, geysers, electric irons, microwaves, or water pumps beyond the inverter’s rated load capacity.
-
Switch off the inverter and isolate solar PV, AC mains, and battery terminals before performing any wiring work or servicing.
FAQ Section
Q: What is the price of Luminous NXG 1850 in Bangladesh?
A: Prices for the Luminous NXG 1850 Solar Hybrid IPS Inverter in Bangladesh generally range between BDT 22,500 and BDT 25,000 for the inverter unit alone, depending on current import pricing and seller stock. Please check the current price listed on loopshop.com.bd for the latest offer.
Q: Where can I buy Luminous NXG 1850 in Bangladesh?
A: You can buy the Luminous NXG 1850 online in Bangladesh from loopshop.com.bd, with delivery available across Dhaka, Chattogram, Sylhet, Khulna, Rajshahi, and all districts.
Q: What warranty does this product have?
A: The Luminous NXG 1850 inverter unit comes with a 24-month (2-year) warranty covering manufacturing defects and internal electronic faults. Check the product warranty terms at purchase for coverage details.
Q: Is this suitable for Bangladesh climate?
A: Yes. With a wide 90V–290V AC grid operating range, built-in solar charging, and ventilated indoor enclosure, it is well suited for Bangladesh’s warm weather, abundant sunlight, and frequent load-shedding conditions.
Q: How to install this product?
A: Place the inverter in a ventilated indoor spot, wire two 12V batteries in series to form a 24V DC bank with matching + and - polarity, wire compatible 24V-class solar panels (36V–60V Voc) through a DC isolator, set the battery type and operating mode switches, and connect AC input and backup load wiring. Professional electrician installation is recommended.
Q: Can the Luminous NXG 1850 work without solar panels at first?
A: Yes. It functions as a standard 24V Pure Sine Wave IPS/UPS using utility grid charging, allowing you to add solar panels later whenever ready.
Q: What solar panels are compatible with the NXG 1850?
A: It supports solar panels with an open-circuit voltage (Voc) between 36V and 60V DC, up to 1500Wp total array capacity (such as three 500W half-cut panels wired in parallel).
Q: Are the batteries and solar panels included in the price?
A: No, the inverter unit is listed separately unless a specific bundle is stated on the product page. Two compatible 12V batteries (wired in series for 24V) and solar panels are purchased separately.
Q: What battery types can be used with Luminous NXG 1850?
A: It supports two 12V Tubular, Flat Plate, and VRLA/GEL batteries wired in series.
Q: Can I run Wi-Fi routers and computers on this solar IPS?
A: Yes. Its pure sine wave output is designed to support Wi-Fi routers, desktop computers, laptops, ceiling fans, and LED lights within the 1250W rating.

Reviews
There are no reviews yet.