Jinko Tiger Neo 615W N-Type Bifacial Solar Panel for Net Metering

  • High-Output 615W TOPCon Power: Delivers 615W rated capacity (22.77% module efficiency) using advanced N-Type monocrystalline TOPCon and SMBB cells, maximizing electricity generation per square meter.

  • Dual-Glass Bifacial Energy Gain: Harvests sunlight from both front and rear surfaces, boosting total energy yield by up to 20% over reflective concrete or white-coated rooftops.

  • Built for Bangladesh’s Climate: Engineered with a low temperature coefficient (-0.29%/°C), anti-PID protection, and dual-glass durability (5400 Pa front / 2400 Pa rear load) to withstand peak summer heat, monsoon rains, and wind.

  • High-Voltage System Ready: Supports 1500V DC systems with an IP68 junction box and MC4-compatible connectors for commercial, industrial, and SREDA net-metering projects in Bangladesh.

  • 30-Year Performance Security: Backed by Jinko Solar’s official 12-year product warranty and 30-year linear performance warranty.

Best Price Guaranteed

Description

The Jinko Solar Tiger Neo 615W N-Type Bifacial Solar Panel (Official) is a high-efficiency dual-glass photovoltaic (PV) module built with N-Type monocrystalline TOPCon (Tunnel Oxide Passivated Contact) cell technology. Unlike traditional P-Type panels, N-Type TOPCon cells eliminate Boron-Oxygen Light-Induced Degradation (LID) and resist LeTID, ensuring higher initial power conversion (22.77% efficiency) and slower annual degradation. Its dual-glass bifacial architecture captures direct solar irradiance on the front and reflected albedo light on the rear, generating up to 20% extra electricity under optimal reflective conditions.

This module is designed for industrial factory owners, commercial building operators, EPC solar contractors, and large residential rooftops seeking maximum power density and long-term return on investment. In Bangladesh—where rising grid electricity tariffs, industrial power demand, and abundant year-round sunlight make rooftop solar essential—the Tiger Neo 615W delivers superior kilowatt-hour (kWh) generation for SREDA net-metering systems, captive industrial power plants, and utility-scale solar farms.

Key Features

  • 615W Rated Output with 0 to +3% Positive Power Tolerance: Guarantees reliable, high-density power output from every module installed.

  • N-Type TOPCon & HOT 2.0 Technology: Eliminates LID degradation and improves low-light response during early mornings, late afternoons, and overcast monsoon days.

  • SMBB (Super Multi Busbar) Cell Design: Enhances light trapping and current collection while reducing internal electrical resistance for higher energy yield.

  • Dual-Glass Bifacial Construction: 2.0 mm anti-reflective front glass paired with 2.0 mm heat-strengthened rear glass captures reflected light for up to 20% additional power generation.

  • Low Temperature Coefficient (-0.29%/°C): Maintains stable voltage and higher power output during extreme summer heat compared to conventional P-Type modules.

  • 1500V DC System Compatibility: Reduces string count, combiner boxes, and DC cabling costs across commercial and utility-scale arrays.

  • IP68 Protection & MC4-Compatible Connectors: Ensures waterproof electrical connections and long-term anti-PID durability.

Technical Advantages

  • Superior Conversion Efficiency (22.77%): Generates significantly more electricity from limited rooftop or land space, lowering Balance-of-System (BOS) and structural mounting costs per watt.

  • Heavy-Duty Mechanical & Weather Resistance: Dual-glass design and anodized aluminum alloy frame withstand 5400 Pa front static loads and 2400 Pa rear wind loads, plus salt-mist and ammonia resistance.

  • Minimal Long-Term Degradation: N-Type cells combined with PID resistance retain higher power output across a 30-year operational lifespan.

  • Enhanced Low-Light & Hot-Weather Yield: Delivers superior energy harvest under diffused monsoon cloud cover and high ambient temperatures common across Bangladesh.

  • Low Maintenance Surface: Anti-reflective front glass minimizes dust adhesion and cleans easily with rain or routine water rinsing.

Applications

  • Residential: High-capacity rooftop on-grid net-metering systems and hybrid solar setups for modern homes and apartment complexes.

  • Commercial: Shopping malls, hospitals, hotels, universities, and commercial towers aiming to offset peak daytime utility costs.

  • Industrial & Factory: Garment factories (RMG), textile mills, pharmaceutical plants, cold storages, and steel/cement industries lowering energy expenses and meeting green compliance goals.

  • Office: Corporate headquarters and IT parks requiring sustainable, cost-effective daytime electricity.

  • Project Installation: Utility-scale ground-mounted solar farms, solar carports, and institutional EPC projects across Bangladesh.

Why Choose This Product?

  • Tier-1 Global Reliability: Manufactured by Jinko Solar, a world-leading Tier-1 PV manufacturer, with official authenticity and full certification.

  • Industry-Leading 30-Year Linear Warranty: Outlasts standard 25-year panels with a 12-year product warranty and a 30-year linear performance warranty.

  • Maximum Financial Return (Lower LCOE): Higher wattage (615W), bifacial rear-side gain, and 1500V DC architecture reduce installation hardware costs and accelerate payback periods.

  • Trusted Local Support: Available through loopshop.com.bd with verified official warranty backing and reliable nationwide logistics across Bangladesh.

Technical Specification Table

Specification Details
Model Tiger Neo JKM615N-66HL4M-BDV
Brand Jinko Solar
Rated Power 615W (STC)
Voltage Vmp: 40.60V | Voc: 48.88V | Max System Voltage: 1500V DC
Current Imp: 15.15A | Isc: 16.02A | Max Series Fuse Rating: 35A
Frequency Not Applicable (DC Output; 50/60 Hz via Compatible Inverter)
Efficiency 22.77%
Protection IP68 Junction Box, Anti-PID, 2.0 mm AR Front Glass + 2.0 mm Heat-Strengthened Rear Glass, Anodized Aluminum Frame, 5400 Pa / 2400 Pa Load Rated
Dimension 2382 mm × 1134 mm × 30 mm
Weight 32.4 kg
Operating Temperature -40°C to +85°C (Temp. Coefficient of Pmax: -0.29%/°C)
Warranty Official Manufacturer Warranty Applicable.

 Features List

✓ 615W high-output N-Type monocrystalline TOPCon solar panel

✓ Up to 22.77% module conversion efficiency with 0 to +3% positive power tolerance

✓ Dual-glass bifacial design boosts energy yield by up to 20% from reflected light

✓ SMBB & HOT 2.0 cell technology minimizes LID/LeTID and electrical losses

✓ Low temperature coefficient (-0.29%/°C) for superior performance in hot climates

✓ 1500V DC maximum system voltage with IP68 junction box and MC4-compatible connectors

✓ Heavy-duty mechanical strength rated for 5400 Pa front and 2400 Pa rear loads

✓ Official 12-year product warranty and 30-year linear performance warranty

 Benefits For Customers

  • Maximizes Electricity Bill Savings: High 615W output plus bifacial rear-side energy capture generates more daily kWh, significantly reducing commercial and industrial grid bills and increasing net-metering export credits.

  • Superior Performance in Bangladesh’s Heat: With a -0.29%/°C temperature coefficient, the panel loses far less power during hot summer afternoons than older P-Type panels.

  • Reduces Mounting & BOS Expenses: High power density (22.77% efficiency) and 1500V DC compatibility mean fewer panels, rails, cables, and labor hours per megawatt or kilowatt installed.

  • Long-Term Durability in Harsh Weather: Dual-glass encapsulation and an anodized aluminum frame protect against moisture, monsoon storms, dust, and Potential-Induced Degradation (PID).

  • 30 Years of Reliable Asset Value: Minimal annual degradation backed by Jinko Solar’s 30-year linear warranty ensures predictable clean energy returns for three decades.

Installation & Maintenance Guide

Installation Requirements:

  • Install on a corrosion-resistant anodized aluminum or hot-dip galvanized steel structure facing due south at an optimal tilt angle (15°–23° in Bangladesh) to maximize solar exposure.

  • To achieve maximum bifacial rear-side gain, mount the panels with adequate ground/roof clearance over a light-colored, white-painted, or concrete reflective surface and avoid rear structural obstructions.

  • Secure panels using approved mid/end clamps or designated mounting holes along the anodized aluminum frame; never drill extra holes into the frame or glass.

  • Verify that string open-circuit voltage (Voc 48.88V adjusted for minimum local temperature) and operating current (Imp 15.15A) match your inverter’s MPPT specifications.

Maintenance Tips:

  • Clean the front glass surface every 2 to 4 weeks (or more often in dusty industrial areas) using clean water and a soft sponge or microfiber wiper.

  • Wash panels early in the morning or after sunset when the glass is cool to avoid thermal stress.

  • Periodically inspect MC4-compatible connectors, DC cables, mounting clamps, and earthing connections for tightness and cleanliness.

Safety Instructions:

  • Cover the panel surfaces with an opaque sheet during installation and wiring, as solar modules produce live DC voltage whenever exposed to sunlight.

  • Properly bond and ground all aluminum frames and mounting structures to a dedicated earthing pit with DC Surge Protection Devices (SPDs).

  • Do not walk, stand, or drop tools on the dual-glass surface; all wiring and grid interconnection must be performed by certified solar engineers.

FAQ Section

Q: What is the price of Jinko 615W N-Type Bifacial Solar Panel (Official) in Bangladesh?

A: The price of the official Jinko Tiger Neo 615W N-Type Bifacial solar panel in Bangladesh varies depending on order quantity, import shipment rates, and project scale. Contact loopshop.com.bd for the latest per-watt and bulk project pricing.

Q: Where can I buy Jinko 615W N-Type Bifacial Solar Panel (Official) in Bangladesh?

A: You can purchase official Jinko Tiger Neo 615W N-Type Bifacial solar panels online from loopshop.com.bd with secure nationwide delivery across Dhaka, Chattogram, Gazipur, Narayanganj, and throughout Bangladesh.

Q: What warranty does this product have?

A: The Jinko Tiger Neo 615W N-Type Bifacial module comes with an official 12-year product warranty and a 30-year linear performance warranty.

Q: Is this suitable for Bangladesh’s climate?

A: Yes. Its low temperature coefficient (-0.29%/°C), dual-glass encapsulation, IP68 junction box, anti-PID protection, and high wind/load resistance make it ideal for Bangladesh’s high temperatures, monsoon rains, and humidity.

Q: How to install this product?

A: Mount the panels facing south on a certified racking structure over a reflective surface (such as a white-coated or concrete roof), connect the MC4-compatible cables in series strings matching your inverter’s MPPT ratings, and complete DC earthing and surge protection via a qualified solar installer.

Q: What is the difference between N-Type TOPCon and P-Type solar panels?

A: N-Type TOPCon solar cells offer higher efficiency (22.77%), virtually zero Light-Induced Degradation (LID), lower temperature losses (-0.29%/°C), better low-light output, and a longer 30-year linear warranty compared to traditional P-Type PERC panels.

Q: How much extra power does the bifacial design generate?

A: Depending on ground or roof reflectivity (albedo), mounting height, and row spacing, the rear side of the Jinko 615W bifacial panel can generate up to 20% additional electricity under optimal conditions.

Q: Is the Jinko 615W Tiger Neo approved for net metering in Bangladesh?

A: Yes, Jinko Solar is a globally recognized Tier-1 manufacturer, and Tiger Neo N-Type modules are widely used for SREDA net-metering projects across residential, commercial, and industrial rooftops in Bangladesh.

Q: What inverter current rating is needed for the Jinko 615W panel?

A: Because the Jinko 615W module has a maximum power current (Imp) of 15.15A and short-circuit current (Isc) of 16.02A (plus bifacial current gain), pair it with a modern solar inverter whose MPPT input supports at least 16A–20A per string.

Q: Why does “Official” matter when buying Jinko solar panels in Bangladesh?

A: Buying an official Jinko Solar module guarantees factory-authentic serial numbers, verified A-grade cells, SREDA net-metering documentation compatibility, and valid 12-year product / 30-year linear performance warranty support in Bangladesh.

Reviews

There are no reviews yet.

Be the first to review “Jinko Tiger Neo 615W N-Type Bifacial Solar Panel for Net Metering”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581