Description
The Jinko 720W Tiger Neo JKM720N-66HL5-BDV Bifacial Solar Panel is an industrial-grade photovoltaic (PV) module utilizing next-generation N-type Tunnel Oxide Passivated Contact (TOPCon) cell architecture. Unlike conventional single-sided panels, this dual-glass bifacial module generates electricity from direct sunlight on its front face as well as reflected light (albedo) hitting its transparent rear surface.
Designed primarily for EPC contractors, factory owners, commercial building operators, and utility-scale solar developers, this module maximizes power density where roof or ground space is at a premium. In Bangladesh—where industrial electricity tariffs are rising and commercial rooftops in Dhaka, Gazipur, Chattogram, and Narayanganj require maximum wattage per square foot—the 720W Tiger Neo significantly accelerates project payback periods.
Key Features
-
720W High Power Output: Reduces the total number of panels, mounting rails, and DC cabling required per megawatt.
-
N-Type TOPCon with HOT 3.0 Technology: Minimizes Light-Induced Degradation (LID) and boosts overall cell conversion efficiency.
-
132-Cell (66×2) Half-Cut Design: Lowers internal resistive losses and improves shade tolerance across partial obstructions.
-
Bifacial Dual-Glass Construction: Captures reflected irradiance from white roofs, concrete, or ground surfaces for additional rear-side power gain.
-
Enhanced Mechanical Load Capacity: Reinforced structural integrity built to endure extreme wind uplift and heavy environmental stress.
-
30-Year Linear Power Warranty: Long-term performance assurance backed by Tier-1 solar manufacturer JinkoSolar.
Technical Advantages
-
High Efficiency & Low-Light Yield: N-type TOPCon cells paired with HOT 3.0 technology maintain superior energy conversion during early mornings, late afternoons, and overcast monsoon days common in Bangladesh.
-
Durable Dual-Glass Protection: Replacing traditional polymer backsheets with tempered glass on both sides eliminates micro-cracking risks, moisture ingress, and Potential Induced Degradation (PID) in high-humidity zones.
-
Lower Balance of System (BOS) Costs: Higher wattage per module means fewer clamps, shorter string wiring runs, and reduced installation labor hours.
-
Reduced Degradation Rate: N-type silicon wafers experience minimal first-year and annual power degradation compared to older P-type PERC modules.
-
Low Maintenance Profile: Smooth dual-glass surfaces resist dust accumulation and allow straightforward cleaning schedules in dusty industrial zones.
Applications
-
Industrial & Factory Rooftops: Garment factories (RMG), textile mills, steel plants, and cold storage facilities seeking net-metering or captive power generation.
-
Commercial Buildings: Shopping malls, hospitals, universities, and corporate office complexes.
-
Utility-Scale Solar Parks: Ground-mounted solar farms utilizing reflective ground cover or single-axis trackers.
-
Infrastructure & Project Installations: Warehouse rooftops, industrial sheds, and large-scale solar pumping or microgrid projects.
Why Choose This Product?
-
Proven Tier-1 Reliability: Manufactured by JinkoSolar, a globally bankable Tier-1 solar brand trusted by major financial institutions and EPCs.
-
Maximum Energy Density: Extracts more kilowatt-hours (kWh) from limited industrial roof space compared to standard 550W–600W panels.
-
Cost-Effective LCOE: Lowers the Levelized Cost of Electricity (LCOE) over a 30-year operational lifespan through higher bifacial yield and reduced mounting hardware costs.
-
Local Supply & Support: Available through loopshop.com.bd with authentic sourcing, technical consultation, and project supply support across Bangladesh.
Technical Specification Table
| Specification | Details |
| Model | JKM720N-66HL5-BDV |
| Brand | JinkoSolar (Tiger Neo Series) |
| Rated Power | 720W (STC) / Up to 795W (BNPI Bifacial) |
| Voltage | Vmp: 40.89V | Voc: 49.04V | Max System Voltage: 1500V DC |
| Current | Imp: 17.61A | Isc: 18.67A | Max Series Fuse Rating: 35A |
| Frequency | DC Output (0 Hz) |
| Efficiency | 23.18% |
| Protection | IP68 Junction Box, Anti-PID, Front 5400Pa / Rear 2400Pa Load |
| Dimension | 2384 × 1303 × 33 mm |
| Weight | 37.5 kg |
| Operating Temperature | -40°C to +70°C |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 720W high-wattage N-type TOPCon output
-
✓ 132 half-cut monocrystalline cells (66×2 layout)
-
✓ Advanced HOT 3.0 cell passivation technology
-
✓ Bifacial dual-glass architecture for front and rear power generation
-
✓ Superior low-light and cloudy-weather performance
-
✓ Enhanced mechanical load resistance against heavy winds
-
✓ 30-year linear power output warranty
-
✓ Low annual degradation and high PID resistance
Benefits For Customers
-
Slashes Industrial Electricity Bills: High wattage and bifacial gain maximize daily kWh generation, significantly reducing grid dependency and peak-hour tariff expenses.
-
Optimizes Limited Roof Space: Generates more power per square meter, making it ideal for Bangladesh’s space-constrained factory sheds and commercial rooftops.
-
Withstands Harsh Local Weather: Dual-glass construction protects cells from high heat, coastal salinity, humidity, and seasonal storms.
-
Lowers Installation & Hardware Expenses: Fewer modules per string reduce spending on aluminum mounting structures, DC cables, and installation labor.
-
Long-Term Asset Security: A 30-year linear power warranty ensures predictable cash flow and energy yield for decades.
Installation & Maintenance Guide
-
Installation Requirements:
-
Must be installed by certified solar EPC engineers using heavy-duty mounting rails rated for large-format dual-glass modules.
-
For optimal bifacial gain, install over high-albedo surfaces (such as white cool-roof coating or light-colored gravel) with adequate ground/roof clearance to avoid rear-side shading from mounting rails.
-
Ensure string voltage and current parameters match the MPPT ratings of your commercial string or central inverter.
-
-
Maintenance Tips:
-
Clean the front glass surface every 2–4 weeks (or more frequently in high-dust industrial areas like Savar, Gazipur, or Narayanganj) using clean water and a soft non-abrasive brush.
-
Avoid cleaning during peak midday heat to prevent thermal shock to the tempered glass.
-
Periodically inspect mounting clamps, MC4 connectors, and grounding bonds for tightness and corrosion.
-
-
Safety Instructions:
-
Solar panels generate lethal DC voltage immediately upon exposure to light; cover modules with an opaque sheet during wiring and commissioning.
-
Do not walk, stand, or place heavy tools on the glass surface during installation.
-
Ensure all module frames and mounting structures are properly grounded in accordance with BNBC (Bangladesh National Building Code) and IEC electrical safety standards.
-
FAQ Section
Q: What is the price of Jinko 720W Tiger Neo JKM720N-66HL5-BDV Bifacial Solar Panel in Bangladesh?
A: The price of the Jinko 720W Tiger Neo JKM720N-66HL5-BDV depends on order volume (single pallet vs. container/project quantity), current import duties, and USD exchange rates. Contact loopshop.com.bd directly for the latest retail or commercial project quotation in BDT.
Q: Where can I buy Jinko 720W Tiger Neo JKM720N-66HL5-BDV Bifacial Solar Panel in Bangladesh?
A: You can order genuine JinkoSolar modules online through loopshop.com.bd, with nationwide delivery and project supply support available across Dhaka, Chattogram, Gazipur, Narayanganj, Sylhet, and other industrial hubs.
Q: What warranty does this product have?
A: The Jinko 720W Tiger Neo JKM720N-66HL5-BDV comes with a comprehensive 30-year linear power warranty, guaranteeing long-term energy output stability.
Q: Is this suitable for Bangladesh climate?
A: Yes. Its N-type TOPCon cells perform exceptionally well in high ambient temperatures and overcast monsoon conditions, while the dual-glass encapsulation protects against high humidity, dust, and heavy wind loads.
Q: How to install this product?
A: Installation should be performed by qualified solar technicians using corrosion-resistant mounting structures engineered for dual-glass bifacial panels. Keep the rear side unobstructed and elevated above a reflective surface to maximize bifacial power gain.
Q: What is the advantage of N-type TOPCon with HOT 3.0 technology over older P-type panels?
A: N-type TOPCon with HOT 3.0 eliminates Boron-Oxygen Light-Induced Degradation (LID), delivers higher conversion efficiency, captures more energy in low-light conditions, and degrades slower over 30 years than traditional P-type PERC panels.
Q: How does a bifacial solar panel generate extra electricity?
A: While the front side absorbs direct sunlight, the transparent rear glass captures sunlight reflected off the roof or ground below, increasing total energy yield depending on surface reflectivity (albedo) and mounting height.
Q: Can I use this 720W solar panel for a home rooftop system?
A: While technically possible for large residential villas with high energy demand, this 720W module is large-format and primarily optimized for commercial, industrial, and utility-scale installations with high-current commercial inverters.
Q: What inverter compatibility should I check before buying?
A: Because 720W bifacial panels produce high operating currents, ensure your solar inverter’s MPPT inputs support high-current modules (typically 18A–20A+ per string) so no power is clipped during peak sunlight.
Q: Does dual-glass construction make the panel more durable?
A: Yes. Dual-glass panels replace the traditional plastic backsheet with tempered glass on both sides, offering superior resistance to moisture, fire, micro-cracks, and environmental wear.

Reviews
There are no reviews yet.