Description
The Jinko 620W Tiger Neo (Model: JKM620N-66HL4M-BDV) is a high-performance N-type TOPCon dual-glass bifacial solar PV module engineered with Super Multi-Busbar (SMBB) and HOT 2.0 cell technologies. Built with 132 half-cut N-type monocrystalline cells, this module delivers 620W front-side power at 22.95% efficiency while capturing reflected ground or rooftop light through its rear heat-strengthened glass (80 ± 5% bifaciality factor).
Designed for commercial buildings, industrial factories, EPC contractors, and utility-scale solar developers, this panel directly addresses rising daytime grid tariffs and roof-space constraints in Bangladesh. Whether installed on expansive RMG factory sheds in Gazipur and Narayanganj or commercial complexes in Dhaka and Chattogram, the Jinko Tiger Neo 620W generates higher daily energy yield per square meter while lowering overall Balance of System (BOS) costs.
Key Features
-
620W Rated Power & 22.95% Efficiency: Produces 620Wp under Standard Test Conditions (STC) with a 0 to +3% positive power tolerance for guaranteed output.
-
SMBB (Super Multi-Busbar) Technology: Enhances light trapping and current collection while shortening current travel paths to improve reliability and power output.
-
HOT 2.0 N-Type Cell Architecture: Minimizes Light-Induced Degradation (LID/LeTID) and delivers strong low-light performance during early mornings, late afternoons, and overcast monsoon days.
-
Excellent Anti-PID Performance: Optimized mass-production processes and dual-glass encapsulation safeguard against Potential Induced Degradation (PID) in hot, humid conditions.
-
2.0 + 2.0 mm Dual-Glass & Anodized Frame: Anti-reflective 2.0 mm front glass and 2.0 mm heat-strengthened rear glass housed in a 30 mm anodized aluminum frame withstand 5400 Pa front static load and 2400 Pa rear wind load.
-
1500V DC System Compatibility: Supports longer PV series strings, reducing DC cabling, combiner box, and installation labor costs.
Technical Advantages
-
High Efficiency: At 22.95% module conversion efficiency (229.5 W/m² power density), fewer modules are required to reach target kWp or megawatt capacities compared to legacy PERC panels.
-
Durable Construction: Dual-glass construction resists moisture ingress, UV aging, ammonia, and salt-mist corrosion in coastal and industrial environments.
-
Safety & Thermal Protection: A low power temperature coefficient of -0.29%/°C minimizes wattage drop during peak summer heat, supported by an IP68 junction box, 35A maximum series fuse rating, and IEC 61215 / IEC 61730 safety certifications.
-
Energy Saving: Strong low-irradiance responsiveness extends productive solar hours each day, maximizing Bangladesh Net Metering export credits.
-
Easy Maintenance: Smooth anti-reflective coated front glass sheds monsoon rain cleanly and simplifies routine dust washing during dry winter months.
Applications
-
Commercial: Shopping malls, hospitals, hotels, universities, and corporate buildings reducing daytime peak electricity bills.
-
Industrial & Factory: Garment (RMG) factories, textile mills, cold storages, and manufacturing plants deploying Net Metering rooftop arrays.
-
Office: Corporate headquarters and commercial office towers seeking reliable, clean daytime power.
-
Project Installation: Ground-mounted utility solar power plants, solar irrigation systems, and large-scale EPC projects.
-
Residential: High-consumption multi-story residential complexes with reinforced mounting structures and high-current MPPT inverters.
Why Choose This Product?
-
Reliability: Certified to IEC 61215 and IEC 61730 standards, backed by Jinko Solar’s global tier-1 manufacturing quality and bankability.
-
Performance: Combines SMBB light-trapping, HOT 2.0 N-type stability, and 80 ± 5% bifaciality for consistent real-world energy generation.
-
Cost Effectiveness: High 620W output per module reduces mounting structure steel, clamps, DC wires, and installation labor costs per watt.
-
After-Sales Value: Protected by Jinko Solar’s 12-year product warranty and 30-year linear power warranty with only 0.40% annual degradation after Year 1—retaining at least 87.4% of nominal power at Year 30.
Technical Specification Table
| Specification | Details |
| Model | JKM620N-66HL4M-BDV (Tiger Neo) |
| Brand | Jinko Solar |
| Rated Power | 620W (STC) / 468W (NOCT) |
| Voltage | Vmp: 40.74V | Voc: 49.08V | Max System Voltage: 1500V DC |
| Current | Imp: 15.22A | Isc: 16.08A | Max Series Fuse Rating: 35A |
| Frequency | DC Output Module (Inverter-dependent AC frequency) |
| Efficiency | 22.95% |
| Protection | IP68 Junction Box, 5400Pa Front / 2400Pa Rear Mechanical Load, Anti-PID, IEC 61215 & IEC 61730 Certified |
| Dimension | 2382 × 1134 × 30 mm (2.70 m²) |
| Weight | 32.4 kg |
| Operating Temperature | -40°C to +85°C (NOCT: 45 ± 2°C | Temp. Coefficient Pmax: -0.29%/°C) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 620W high-efficiency N-type bifacial operation (22.95% efficiency)
-
✓ Advanced SMBB and HOT 2.0 cell technology with strong Anti-PID resistance
-
✓ 80 ± 5% bifaciality factor for additional rear-side power generation
-
✓ 2.0 + 2.0 mm dual-glass construction with IP68 junction box and 1500V DC rating
-
✓ Low -0.29%/°C temperature coefficient for reliable hot-weather performance
-
✓ 12-year product warranty and 30-year linear power warranty (0.40% annual degradation)
Benefits For Customers
-
Reduces Electricity Cost: Generates high daytime kWh yield per square meter to offset expensive commercial and industrial grid bills and maximize Bangladesh Net Metering export credits.
-
Improves Operational Reliability: N-type HOT 2.0 cells resist PID and LID/LeTID degradation, maintaining steady output across 30 years of operation.
-
Saves Maintenance & BOS Cost: Higher 620W density lowers total module count, mounting hardware, DC cabling, and routine cleaning labor.
-
Suitable for Bangladesh Environment: Dual-glass encapsulation, salt-mist/ammonia resistance, and low thermal degradation withstand high summer heat, heavy monsoon rains, and coastal humidity.
Installation & Maintenance Guide
Installation Requirements:
-
Mount on an anodized aluminum or hot-dip galvanized steel racking structure engineered for local wind loads, tilted south at approximately 20°–23° for Bangladesh.
-
To maximize the 80 ± 5% rear-side bifacial gain, install the modules on an elevated open rack above a white-coated or light-colored roof surface and keep mounting rails clear of the rear glass.
-
Verify inverter MPPT specifications against the module’s Voc (49.08V) and Imp (15.22A) so series string voltage stays safely below the inverter’s maximum DC limit and MPPT current is not clipped (pair with inverters rated for ≥16A per string).
Maintenance Tips:
-
Wash the front glass every 2 to 4 weeks during Bangladesh’s dry season (November–April) using clean water and a non-abrasive microfiber wiper to remove dust and bird droppings.
-
Clean early in the morning or after sunset when the glass surface is cool to prevent thermal shock.
-
Inspect MC4 connectors, 4.0 mm² solar DC cables, and frame clamps every 6 months for tightness and weather integrity.
Safety Instructions:
-
Photovoltaic modules generate hazardous DC voltage whenever exposed to light; cover the front surface with an opaque sheet during electrical wiring or maintenance.
-
Never disconnect MC4 connectors under load.
-
Properly ground all aluminum frames and metallic mounting structures in compliance with BNBC (Bangladesh National Building Code) and IEC electrical safety standards.
FAQ Section
Q: What is the price of Jinko 620W Tiger Neo JKM620N-66HL4M-BDV Bifacial Solar Panel in Bangladesh?
A: The price of the Jinko 620W Tiger Neo (JKM620N-66HL4M-BDV) solar panel in Bangladesh depends on purchase volume (single unit vs. full pallet/project order) and prevailing import exchange rates. Contact loopshop.com.bd directly for the latest retail or commercial project quotation.
Q: Where can I buy Jinko 620W Tiger Neo JKM620N-66HL4M-BDV Bifacial Solar Panel in Bangladesh?
A: You can purchase genuine Jinko 620W Tiger Neo (JKM620N-66HL4M-BDV) bifacial solar panels online from loopshop.com.bd with safe nationwide delivery across Dhaka, Chattogram, Gazipur, Narayanganj, Sylhet, Khulna, and all districts in Bangladesh.
Q: What warranty does this product have?
A: It comes with a 12-year manufacturer product warranty covering materials and workmanship, plus a 30-year linear performance warranty with only 0.40% annual degradation after Year 1—guaranteeing at least 87.4% output at Year 30.
Q: Is this suitable for Bangladesh climate?
A: Yes. Its low power temperature coefficient (-0.29%/°C) minimizes wattage loss during hot summer afternoons, while 2.0 + 2.0 mm dual-glass encapsulation, an IP68 junction box, and salt-mist/ammonia resistance protect against monsoon rain and coastal humidity.
Q: How to install this product?
A: Have a qualified solar engineer mount the panel on a corrosion-resistant frame tilted south at 20°–23° above a reflective surface, connect strings using 4.0 mm² solar DC cables and compatible connectors, pair with high-current MPPT inverters (≥16A per string), and properly ground all frames.
Q: What are SMBB and HOT 2.0 technologies in the Jinko Tiger Neo 620W panel?
A: SMBB (Super Multi-Busbar) uses finer, denser busbars to improve light trapping and current collection, while HOT 2.0 (N-type TOPCon tunnel oxide passivated contact) reduces electron recombination, eliminates Light-Induced Degradation (LID), and improves reliability.
Q: How much extra power does the bifacial design generate?
A: With an 80 ± 5% reference bifaciality factor, rear-side irradiance typically adds 5% to 15% extra real-world energy yield depending on roof reflectivity (albedo), mounting height, and shading.
Q: Is the JKM620N-66HL4M-BDV eligible for Bangladesh Net Metering projects?
A: Yes, Jinko Tiger Neo N-type bifacial modules are listed on SREDA’s Net Metering solar module list and are widely used in commercial and industrial Net Metering installations across Bangladesh.
Q: What inverter current rating is required for this 620W panel?
A: Because the panel has a Maximum Power Current (Imp) of 15.22A and Short-Circuit Current (Isc) of 16.08A, pair it with modern string or hybrid inverters supporting at least 16A to 20A MPPT input current per string.
Q: What are the physical dimensions and weight of one Jinko 620W panel?
A: Each module measures 2382 × 1134 × 30 mm (2.70 m²) and weighs 32.4 kg, requiring two technicians for safe lifting and roof installation.

Reviews
There are no reviews yet.