Description
The JA Solar Deep Blue 4.0 Pro 620W Bifacial Solar Panel (Model: JAM66D45-620/LB) is an N-type double-glass bifacial photovoltaic (PV) module engineered for high-yield commercial, industrial, and utility-scale solar power systems. Utilizing JA Solar’s advanced N-type Bycium+ cell technology with 132 half-cut cells and Multi-Busbar (MBB) interconnection, the module captures sunlight from both the front glass and the rear glass—turning ground and rooftop albedo reflection into bonus kilowatt-hours.
Designed for Ready-Made Garment (RMG) factory rooftops, industrial sheds, commercial buildings, solar irrigation stations, and utility solar parks, this 620W module supports 1500V DC system architectures. In Bangladesh—where industrial electricity tariffs are rising, rooftop space is at a premium, and high ambient temperatures challenge conventional P-type panels—the Deep Blue 4.0 Pro 620W delivers higher energy density, lower temperature degradation, and faster Net Metering payback.
Key Features
-
620W Rated Front Power (
23.0%Efficiency): Generates620 Wp(with0 to +3%positive power tolerance) across a2.70 m²footprint, reducing the total module count and mounting hardware needed per megawatt. -
Bifacial Double-Glass Architecture (
80% ± 5%Bifaciality): Dual2.0 mmheat-strengthened glass layers harvest reflected rear-side irradiance—boosting total output up to670Wunder a10%rear solar irradiation ratio. -
N-Type Bycium+ & MBB Half-Cell Technology: Eliminates Boron-Oxygen Light-Induced Degradation (LID) and lowers internal series resistance for higher fill factor and stronger low-light performance.
-
Superior Thermal Coefficient (
-0.290%/°C): Retains significantly more wattage when rooftop temperatures climb above 40°C during Bangladesh’s summer months compared to standard P-type modules. -
1500V DC System Optimization: Operates at
40.21Vmaximum power voltage (Vmp),48.50Vopen-circuit voltage (Voc),15.42Amaximum power current (Imp), and16.13Ashort-circuit current (Isc), allowing longer strings and lower BOS costs.
Technical Advantages
-
High Efficiency & Low-Irradiance Gain: Enhanced minority carrier lifetime and anti-reflective double-glass surfaces deliver strong electricity generation during early mornings, late afternoons, and cloudy monsoon skies.
-
Heavy-Duty Double-Glass Construction: Built with
2.0 mmfront and2.0 mmrear glass inside an anodized aluminum frame (2382 × 1134 × 30 mm,33.1 kg), rated for5400 Pafront static load and2400 Parear wind load. -
Certified Safety & Ingress Protection: Equipped with an IP68-rated junction box containing 3 bypass diodes,
35Amaximum series fuse rating, and IEC 61215 / IEC 61730 / IEC 62941 certifications. -
Long-Term Energy & BOS Savings: Higher wattage per panel and lower open-circuit voltage enable more modules per string, cutting DC cable, inverter, and installation labor costs.
-
Easy Maintenance: Smooth dual-glass surfaces resist moisture ingress and chemical corrosion, making routine water cleaning fast and reliable.
Applications
-
Residential: High-capacity residential rooftop Net Metering and hybrid solar systems with light-colored reflective roofs.
-
Commercial: Shopping malls, hospitals, cold storages, universities, and commercial complexes.
-
Industrial: Heavy manufacturing plants, steel/cement facilities, and utility-scale ground-mounted solar farms.
-
Factory: Garment (RMG) and textile factory rooftops seeking maximum kWp generation under Bangladesh Net Metering policies.
-
Office: Corporate headquarters, banks, and IT parks offsetting daytime peak grid consumption.
-
Project Installation: Utility-scale solar parks, solar irrigation projects, elevated solar carports, and EPC turnkey installations.
Why Choose This Product?
-
Tier-1 Global Reliability: Manufactured by JA Solar under ISO 9001, ISO 14001, ISO 45001, and IEC 62941 quality management standards with SREDA listing eligibility for Net Metering in Bangladesh.
-
Superior Real-World Energy Yield: N-type cell chemistry (
1%max first-year degradation and0.4%annual degradation thereafter) paired with bifacial rear gain maximizes lifetime kWh output. -
Long-Term Cost Effectiveness: Backed by a 12-year product warranty and 30-year linear power output warranty (
87.4%guaranteed at Year 30), delivering lower Levelized Cost of Electricity (LCOE). -
Dedicated Local Support: Sourced for Bangladesh EPC contractors and businesses through LoopShop.com.bd with technical string-sizing assistance and safe project logistics.
Technical Specification Table
| Specification | Details |
| Model | JAM66D45-620/LB |
| Brand | JA Solar |
| Rated Power | 620W (Power Tolerance: 0 ~ +3%, Bifaciality: 80% ± 5%) |
| Voltage | Vmp: 40.21V / Voc: 48.50V / Max System Voltage: 1500V DC |
| Current | Imp: 15.42A / Isc: 16.13A |
| Frequency | DC Output (0 Hz) |
| Efficiency | 23.0% |
| Protection | IP68 Junction Box (3 Diodes), Max Series Fuse: 35A, IEC 61215 / IEC 61730 |
| Dimension | 2382 × 1134 × 30 mm |
| Weight | 33.1 kg |
| Operating Temperature | -40°C to +85°C (NOCT: 45°C ± 2°C) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 620W high-output N-type double-glass bifacial solar module
-
✓ 23.0% module conversion efficiency with 0 to +3% positive power tolerance
-
✓ 80% ± 5% bifaciality factor for bonus rear-side power generation
-
✓ Advanced N-type Bycium+ cells with Multi-Busbar (MBB) half-cell design
-
✓ Ultra-low
-0.290%/°Ctemperature coefficient for hot weather performance -
✓ Dual 2.0 mm tempered glass construction (
5400 Pafront /2400 Parear load) -
✓ 1500V DC maximum system voltage with IP68 junction box and 35A max fuse rating
-
✓ Backed by a 12-year product warranty and 30-year linear power warranty
Benefits For Customers
-
Reduces Electricity Cost: Maximizes solar kWh output per square foot of roof space and captures reflected rear-side sunlight, accelerating Net Metering ROI for factories and commercial buildings.
-
Improves Operational Reliability: N-type double-glass construction resists moisture ingress, micro-cracks, and Light-Induced Degradation (LID) over decades of service.
-
Saves BOS & Installation Cost: High 620W rating and
48.50Vopen-circuit voltage reduce mounting structures, DC string cabling, and labor costs per megawatt. -
Suitable for Bangladesh Environment: Rated for
-40°Cto+85°Coperation, tropical monsoon humidity, and high cyclonic wind loads (5400 Pafront /2400 Parear).
Installation & Maintenance Guide
Installation Requirements
-
Orientation & Tilt: Install modules facing true south at an optimal tilt angle of 15°–25° for commercial rooftops or ground mounts in Bangladesh to maximize annual irradiance.
-
Rear-Side Albedo Optimization: To maximize bifacial rear-side gain (
80% ± 5%), elevate modules properly above white-painted roofs, reflective membranes, or light-colored ground surfaces without rear shading obstructions. -
Structural & Wind Load Compliance: Secure the
2382 × 1134 × 30 mm(33.1 kg) double-glass frame onto heavy-duty hot-dip galvanized steel or anodized aluminum rails following JA Solar clamping specifications. -
Inverter & String Sizing: Verify series string open-circuit voltage (
Voc: 48.50V, max system1500V DC) and operating current (Imp: 15.42A,Isc: 16.13A) against your inverter MPPT limits (ensure MPPT channels support ≥16A–20A input current).
Maintenance Tips
-
Routine Glass Cleaning: Wash the front
2.0 mmanti-reflective glass surface every 2 to 4 weeks using clean water and a soft sponge or microfiber mop to remove industrial dust, soot, and bird droppings. -
Thermal-Safe Cleaning Timing: Perform water rinsing early in the morning or after sunset while glass temperatures are cool to prevent thermal shock.
-
Biannual System Inspection: Inspect MC4-EVO2A compatible connectors,
4 mm²DC cables, earthing bonds, and mounting clamps every 6 months for tightness and corrosion resistance.
Safety Instructions
-
High-Voltage DC Hazard: A single module outputs
48.50V Vocwhenever exposed to light, and series strings can reach up to1500V DC; only qualified solar engineers should perform DC string connections using insulated tools. -
Never Disconnect Under Load: Always isolate inverter AC and DC disconnects before unplugging DC connectors to prevent hazardous DC arc flash.
-
Two-Person Double-Glass Handling: Carry the
33.1 kgdouble-glass module using at least two technicians holding the aluminum frame—never lift by the junction box or cables, and never walk or place heavy objects on the glass surface.
FAQ Section
Q: What is the price of JA Solar Deep Blue 4.0 Pro 620W Bifacial Solar Panel in Bangladesh?
A: In Bangladesh, the JA Solar Deep Blue 4.0 Pro 620W Bifacial Solar Panel (JAM66D45-620/LB) typically ranges from ৳12,400 to ৳16,500 per panel (around ৳20–৳26.5 per watt) depending on import lot and project volume. Check LoopShop.com.bd for live retail pricing and bulk EPC quotations.
Q: Where can I buy JA Solar Deep Blue 4.0 Pro 620W Bifacial Solar Panel in Bangladesh?
A: You can order genuine JA Solar Deep Blue 4.0 Pro 620W (JAM66D45-620/LB) bifacial solar panels online from LoopShop.com.bd with dedicated pickup-van/truck transport across Dhaka, Chattogram, Gazipur, Narayanganj, Savar, Sylhet, Khulna, and Rajshahi.
Q: What warranty does this product have?
A: The JA Solar Deep Blue 4.0 Pro 620W comes with a 12-year product workmanship warranty and a 30-year linear power output warranty (1% max first-year degradation and 0.4% annual degradation thereafter, retaining 87.4% at Year 30).
Q: Is this suitable for Bangladesh climate?
A: Yes. With an operating temperature range of -40°C to +85°C, an ultra-low -0.290%/°C temperature coefficient, dual 2.0 mm tempered glass, IP68 junction box, and 5400 Pa mechanical load rating, it is engineered for Bangladesh’s hot summers and heavy monsoon seasons.
Q: How to install this product?
A: Mount the panels on a south-facing galvanized steel or aluminum structure at a 15°–25° tilt with clearance beneath the rear glass for reflected light, wire them in series strings matched to a commercial string or hybrid inverter MPPT (supporting ≥16A input current), and complete proper DC earthing and SPD protection.
Q: What is the exact model number, size, and weight of this JA Solar 620W panel?
A: The exact model code is JAM66D45-620/LB. Each module measures 2382 × 1134 × 30 mm and weighs 33.1 kg.
Q: How much extra power can the bifacial rear side generate?
A: With an 80% ± 5% bifaciality factor, rear-side light reflection can increase total module output by 5% to 15% (reaching 670W at a 10% rear irradiation ratio) depending on roof color, mounting height, and row spacing.
Q: Which inverters are compatible with the JA Solar Deep Blue 4.0 Pro 620W?
A: Because its maximum power current (Imp) is 15.42A and short-circuit current (Isc) is 16.13A, it should be paired with modern commercial on-grid or hybrid inverters whose MPPT channels accept at least 16A–20A per string.
Q: Is the JA Solar JAM66D45-620/LB suitable for Net Metering projects in Bangladesh? A: Yes. JA Solar Deep Blue 4.0 Pro modules are widely used in SREDA-compliant commercial and industrial rooftop Net Metering systems across Bangladesh.
Q: Why is N-type technology better than older P-type PERC solar panels?
A: N-type Bycium+ cells eliminate Boron-Oxygen Light-Induced Degradation (LID), offer a better temperature coefficient (-0.290%/°C), capture more energy in low-light conditions, and carry a 30-year linear power warranty instead of 25 years.

Reviews
There are no reviews yet.