JA Solar JAM66D45-615/LB 615W Deep Blue 4.0 Pro Bifacial PV

  • High 615W N-Type Bifacial Output: Delivers 615Wp rated power (up to 664W with 10% rear irradiance) and 22.8% module efficiency using 132 half-cut N-type Bycium+ 16BB cells.

  • Dual-Glass Bifacial Energy Gain: Captures direct sunlight on the front and reflected roof or ground irradiance on the rear (80% ± 5% bifaciality factor) to boost daily kWh yield.

  • Superior Heat & Weather Endurance: Features a low -0.290%/°C temperature coefficient, 2.0 + 2.0 mm tempered dual-glass construction, and an IP68 junction box built for Bangladesh’s hot summers and heavy monsoons.

  • Ideal for Bangladesh Commercial & Utility Projects: Reduces Balance of System (BOS) mounting and DC cabling costs on RMG factories, offices, and SREDA Net Metering rooftops.

  • 30-Year Linear Power Warranty: Backed by a 12-year product warranty and a 30-year linear power warranty guaranteeing 87.4% power output at Year 30 (0.4% annual degradation).

Best Price Guaranteed

Description

The JA Solar Deep Blue 4.0 Pro 615W (Model: JAM66D45-615/LB) is a high-efficiency N-type double-glass bifacial solar module engineered with 16-Busbar (16BB / MBB) half-cell technology and Bycium+ N-type monocrystalline cells. Built with 132 half-cut cells in a 6×22 layout, the module delivers 615Wp front-side power at 22.8% module efficiency while capturing reflected light from the rear glass (80% ± 5% bifaciality factor), boosting output up to 664W under 10% rear irradiation.

Designed for commercial buildings, industrial factories, EPC contractors, and utility-scale solar developers, this module directly addresses rising daytime electricity tariffs and roof-space constraints in Bangladesh. Whether installed on expansive RMG factory sheds in Gazipur and Narayanganj or commercial complexes in Dhaka and Chattogram, the JA Solar Deep Blue 4.0 Pro 615W generates higher daily energy yield per square meter while lowering Balance of System (BOS) expenses.

Key Features

  • 615W Rated Power & 22.8% Efficiency: Produces 615Wp under Standard Test Conditions (STC) with a 0 to +3% positive power tolerance for guaranteed output.

  • 16BB MBB Half-Cell N-Type Architecture: Enhances light trapping, shortens internal current collection paths, and virtually eliminates Light-Induced Degradation (LID).

  • 80% ± 5% High Bifaciality Factor: Harvests reflected irradiance from white-coated roofs, concrete, or light gravel to increase total daily energy generation.

  • 2.0 + 2.0 mm Tempered Dual-Glass Build: Front and rear 2.0 mm tempered solar glass enclosed in a 30 mm anodized aluminum alloy frame blocks moisture ingress, UV aging, and Potential Induced Degradation (PID).

  • High Mechanical Load & IP68 Protection: Certified to withstand 5400 Pa front static load and 2400 Pa rear wind load, equipped with an IP68-rated junction box housing 3 bypass diodes.

  • 1500V DC System Compatibility: Supports longer PV series strings, reducing DC cabling, combiner box, and installation labor costs.

Technical Advantages

  • High Efficiency: At 22.8% module conversion efficiency, fewer modules are required to achieve target kilowatt-peak (kWp) or megawatt capacities compared to conventional PERC modules.

  • Durable Construction: Double-glass encapsulation paired with a rigid anodized aluminum frame resists micro-cracking, salt mist, and coastal humidity.

  • Safety & Thermal Protection: A low power temperature coefficient of -0.290%/°C minimizes wattage drop during peak summer heat, supported by a 35A maximum series fuse rating and IEC 61215 / IEC 61730 / UL 61730 safety certifications.

  • Energy Saving: Superior low-irradiance response extends productive generation hours during early mornings, late afternoons, and overcast monsoon days, maximizing Bangladesh Net Metering export credits.

  • Easy Maintenance: Smooth front tempered glass sheds monsoon rain cleanly and simplifies routine dust washing during dry winter months.

Applications

  • Commercial: Shopping malls, hospitals, hotels, universities, and corporate buildings reducing daytime peak electricity bills.

  • Industrial & Factory: Garment (RMG) factories, textile mills, cold storages, and manufacturing plants deploying Net Metering rooftop arrays.

  • Office: Corporate headquarters and commercial office towers seeking reliable, clean daytime power.

  • Project Installation: Ground-mounted utility solar power plants, solar irrigation systems, and large-scale EPC projects.

  • Residential: High-consumption multi-story residential complexes with reinforced mounting structures and high-current MPPT inverters.

Why Choose This Product?

  • Reliability: Certified to IEC 61215, IEC 61730, UL 61215, UL 61730, IEC 62941, ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 standards for bankable Tier-1 durability.

  • Performance: Combines N-type Bycium+ cells, 16BB MBB half-cell layout, and 80% bifaciality for high real-world yield and lower Levelized Cost of Electricity (LCOE).

  • Cost Effectiveness: High 615W power density reduces mounting structure steel, clamps, DC wires, and installation labor costs per watt.

  • After-Sales Value: Supported by JA Solar’s 12-year product warranty and 30-year linear performance warranty with only 1% first-year degradation and 0.4% annual degradation thereafter—retaining at least 87.4% of nominal output at Year 30.

Technical Specification Table

Specification Details
Model JAM66D45-615/LB (Deep Blue 4.0 Pro)
Brand JA Solar
Rated Power 615W (STC) / 664W (with 10% Rear Irradiation Ratio)
Voltage Vmp: 39.96V | Voc: 48.30V | Max System Voltage: 1500V DC
Current Imp: 15.39A | Isc: 16.10A | Max Series Fuse Rating: 35A
Frequency DC Output Module (Inverter-dependent AC frequency)
Efficiency 22.8%
Protection IP68 Junction Box (3 Bypass Diodes), 5400Pa Front / 2400Pa Rear Load, IEC 61215 & IEC 61730 Certified
Dimension 2382 × 1134 × 30 mm
Weight 33.1 kg
Operating Temperature -40°C to +85°C (NOCT: 45 ± 2°C | Temp. Coefficient Pmax: -0.290%/°C)
Warranty Official Manufacturer Warranty Applicable.

Features List

  • ✓ 615W high-efficiency N-type bifacial operation (22.8% efficiency)

  • ✓ Advanced 16BB MBB half-cell technology with lower LID degradation

  • ✓ 80% ± 5% bifaciality factor for extra rear-side energy yield

  • ✓ 2.0 + 2.0 mm double-glass construction with IP68 junction box and 1500V DC rating

  • ✓ Low -0.290%/°C temperature coefficient and 5400Pa front / 2400Pa rear load capacity

  • ✓ 12-year product warranty and 30-year linear performance warranty (0.4% annual degradation)

Benefits For Customers

  • Reduces Electricity Cost: Generates high daytime kWh yield per square meter to offset expensive commercial and industrial grid bills and maximize Bangladesh Net Metering export credits.

  • Improves Operational Reliability: N-type Bycium+ cells resist LID and PID degradation, maintaining steady output across 30 years of operation.

  • Saves Maintenance & BOS Cost: Higher 615W density lowers total module count, mounting hardware, DC cabling, and routine cleaning labor.

  • Suitable for Bangladesh Environment: Double-glass encapsulation and low thermal degradation withstand high summer heat, heavy monsoon rains, and coastal humidity.

 Installation & Maintenance Guide

Installation Requirements:

  • Mount on an anodized aluminum or hot-dip galvanized steel racking structure engineered for local wind loads, tilted south at approximately 20°–23° for Bangladesh.

  • To maximize the 80% ± 5% rear-side bifacial gain, install the panels on an elevated open rack above a white-coated or light-colored roof surface and keep mounting rails clear of the rear glass.

  • Verify inverter MPPT specifications against the module’s Voc (48.30V) and Imp (15.39A) so series string voltage stays safely below the inverter’s maximum DC limit and MPPT current is not clipped (pair with inverters rated for ≥16A per string).

Maintenance Tips:

  • Wash the front glass every 2 to 4 weeks during Bangladesh’s dry season (November–April) using clean water and a non-abrasive microfiber wiper to clear dust and bird droppings.

  • Clean early in the morning or after sunset when the glass surface is cool to prevent thermal shock.

  • Inspect QC 4.10-351 / MC4-EVO2A connectors, 4 mm² solar DC cables, and frame clamps every 6 months for tightness and weather integrity.

Safety Instructions:

  • Photovoltaic modules generate hazardous DC voltage whenever exposed to light; cover the front surface with an opaque sheet during electrical wiring or maintenance.

  • Never disconnect MC4 connectors under load.

  • Properly ground all aluminum frames and metallic mounting structures in compliance with BNBC (Bangladesh National Building Code) and IEC electrical safety standards.

FAQ Section

Q: What is the price of JA Solar Deep Blue 4.0 Pro 615W Bifacial Solar Panel in Bangladesh?

A: The price of the JA Solar Deep Blue 4.0 Pro 615W (JAM66D45-615/LB) solar panel in Bangladesh depends on purchase volume (single unit vs. full pallet/project order) and prevailing import exchange rates. Contact loopshop.com.bd directly for the latest retail or commercial project quotation.

Q: Where can I buy JA Solar Deep Blue 4.0 Pro 615W Bifacial Solar Panel in Bangladesh?

A: You can purchase genuine JA Solar Deep Blue 4.0 Pro 615W (JAM66D45-615/LB) bifacial solar panels online from loopshop.com.bd with safe nationwide delivery across Dhaka, Chattogram, Gazipur, Narayanganj, Sylhet, Khulna, and all districts in Bangladesh.

Q: What warranty does this product have?

A: It comes with a 12-year manufacturer product warranty covering materials and workmanship, plus a 30-year linear performance warranty with only 1% first-year degradation and 0.4% annual degradation thereafter—guaranteeing at least 87.4% output at Year 30.

Q: Is this suitable for Bangladesh climate?

A: Yes. Its low power temperature coefficient (-0.290%/°C) minimizes wattage loss during hot summer afternoons, while 2.0 + 2.0 mm tempered dual-glass encapsulation and an IP68 junction box protect against monsoon rains and high humidity.

Q: How to install this product?

A: Have a qualified solar engineer mount the panel on a corrosion-resistant frame tilted south at 20°–23° above a reflective surface, connect strings using 4 mm² solar DC cables and MC4-compatible connectors, pair with high-current MPPT inverters (≥16A per string), and properly ground all frames.

Q: What is Deep Blue 4.0 Pro N-type technology in this JA Solar 615W panel?

A: Deep Blue 4.0 Pro uses N-type Bycium+ monocrystalline wafers with 16BB MBB half-cell interconnections to eliminate Light-Induced Degradation (LID), improve low-light response, and achieve 22.8% module efficiency.

Q: How much extra power does the bifacial design generate?

A: With an 80% ± 5% bifaciality factor, rear-side irradiance boosts output up to 664W at a 10% irradiation ratio, typically adding 5% to 20% extra real-world energy yield depending on roof reflectivity (albedo) and mounting height.

Q: Is the JAM66D45-615/LB suitable for Bangladesh Net Metering projects?

A: Yes, JA Solar Deep Blue 4.0 Pro N-type bifacial modules are widely used in commercial and industrial Net Metering solar installations across Bangladesh.

Q: What inverter current rating is required for this 615W panel?

A: Because the module has a Maximum Power Current (Imp) of 15.39A and Short-Circuit Current (Isc) of 16.10A, pair it with modern string or hybrid inverters supporting at least 16A to 20A MPPT input current per string.

Q: What are the physical dimensions and weight of one JA Solar 615W panel?

A: Each module measures 2382 × 1134 × 30 mm and weighs 33.1 kg, requiring two technicians for safe lifting and roof installation.

Reviews

There are no reviews yet.

Be the first to review “JA Solar JAM66D45-615/LB 615W Deep Blue 4.0 Pro Bifacial PV”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581