Description
The Cooper ULCAH330 intelligent addressable analogue multi-mode heat detector represents an advanced commercial fire protection solution designed for challenging architectural environments. While standard smoke detectors often struggle with false alarms in areas filled with ambient dust, heavy steam, or manufacturing fumes, this premium thermal sensor head uses precise thermal tracking to deliver reliable, code-compliant structural property protection.
By coupling the device directly with the universal UCAB300 addressable sensor base, fire safety installers establish an exceptionally stable, low-profile ceiling assembly. The Cooper ULCAH330 provides system designers with maximum field versatility, allowing the unit to be configured dynamically to target specific high-temperature thresholds or rapid rate-of-rise spikes.
⚙️ Key Cooper ULCAH330 Multi-Mode Heat Tracking Capabilities
- Dynamic Rate-of-Rise Monitoring: Tracks rapid escalations in ambient room temperature, signaling emergency conditions to the panel before structural fire spreads.
- Dual Fixed-Temperature Thresholds: Programmed to trip instantly when ambient conditions cross either a standard 135°F (57°C) index or a high-temperature 194°F (90°C) limit.
- Plug-and-Play Soft Addressing: Eliminates manual decimal numbering errors by relying on fully automated digital mapping protocols driven by the fire alarm panel.
- Built-In Circuit Isolation: Houses integrated short circuit isolators within the head electronics to safeguard global branch line communications from localized field shorts.
🔒 Advanced UCAB300 Base Termination Features
- Loop Line Continuity Link: Features an integrated hardware shorting link that automatically preserves loop wiring data streams when the sensor head is detached for cleaning.
- Spliceless Captive Terminals: Separate loop-in and loop-out screw terminal blocks securely lock down solid conductors up to 2.5mm² for cleaner wiring finishes.
- 360-Degree Lightpipe Status: Multidirectional clear lightpipe lens elements flash gently to verify loop polling status and turn solid red during an active fire event.
- Mechanical Anti-Removal Lock: Includes a selectable base locking tab configuration to protect active infrastructure assets against unauthorized device tampering.
📋 Engineering & Architecture Resources
Verify precise technical waveform parameters, alarm current draw limits, and detailed wiring diagrams in the official manufacturer submittal document: eaton-fire-ul-addressable-detectors-ulcah330-ulcap320-ulcapt340-datasheet.pdf. You can cross-verify all international design safety compliance registries directly through the official UL Product iQ Directory.
Technical Specifications Table
| Property | Specification Details |
|---|---|
| Brand / Manufacturer | Eaton Cooper |
| Detector Head Code | ULCAH330 (Programmable Multi-Mode Thermal Sensor) |
| Compatible Base Code | UCAB300 (Intelligent Standard Base) |
| Life Safety Standards | UL 521 Listed (Heat Detectors for Fire Protective Signaling) |
| Working Voltage | 18V DC to 30V DC |
| Voltage Waveform Profile | Filtered DC +/- 1V Maximum (Ripple frequency at 120Hz) |
| Standby Quiescent Draw | 220 µA Average loop consumption |
| Maximum Alarm Current | 5 mA Maximum line pull |
| Start-Up / Reset Timings | 2 Seconds initialization / 2 Seconds maximum reset duration |
| Thermal Classes Available | Rate of Rise + Fixed 135°F | Fixed 135°F | Fixed 194°F |
| Heat Detector Spacing | 50 ft spacing boundary compliance limits |
| Ingress Protection Rating | IP40 Rating |
| UL Temperature Environment | 32°F to 100°F (0°C to 38°C) | Extended limits up to 150°F (65°C) for 194°F setting |
| Relative Humidity Limits | 0% to 93% RH non-condensing moisture boundaries |
| Assembled Size Dimensions | 104 mm Base Diameter x 55 mm Depth profile including base |
Frequently Asked Questions (FAQ)
Q1: When should a multi-mode heat detector be used instead of a standard smoke detector?
A: The Cooper ULCAH330 should be used in applications where ambient dust, manufacturing fumes, steam, or routine exhaust smoke would trigger false alarms in optical sensors. This includes kitchens, boiler areas, loading bays, and multi-story parking garages.
Q2: How does a rate of rise thermal setting provide faster fire notifications?
A: The rate of rise (ROR) configuration tracks temperature changes over short periods. If a fire develops rapidly, the detector sends a signal to the panel immediately before the room reaches a dangerous fixed threshold.
Q3: Does the programmable element reduce system hardware inventory requirements?
A: Yes. Because the Cooper ULCAH330 can switch between three distinct thermal profiles using panel software configurations, you can store a single model number to cover varying safety parameters across a project layout.
Q4: What happens to downstream loop devices if a single sensor head is twisted open for maintenance?
A: The UCAB300 mounting base incorporates an automatic shorting link link. This link bridges the gap when the sensor head is twisted open, keeping downstream loop devices connected normally without loop line interruptions.
Q5: Can this addressable base drive an auxiliary sounder within a localized room group?
A: Yes. While the standard UCAB300 base is included for regular wiring terminations, the Cooper ULCAH330 head is fully compatible with the ULCAS380 addressable sounder base to run software-defined evacuation groups.



Reviews
There are no reviews yet.