AIKO AIKO-A770-GRH78Dw 770W Bifacial Solar Panel Commercial PV

  • High-Output Energy Generation: Delivers 770W rated power (up to 845W BNPI bifacial output) with 24.0% module efficiency using advanced 156-cell N-type ABC (All Back Contact) architecture.

  • Superior Shading & Heat Tolerance: Engineered with cell-level partial shading optimization and a low -0.26%/°C temperature coefficient to minimize power loss during intense Bangladeshi summers.

  • Dual-Glass Structural Durability: Built with 2.0 + 2.0 mm coated semi-tempered glass, anodized aluminum frame, and an IP68 junction box to resist humidity, dust, and coastal corrosion.

  • Ideal for Bangladesh Solar Projects: Maximizes kWh yield per square meter on industrial factory roofs, commercial buildings, and utility installations while reducing Balance of System (BOS) costs.

  • Long-Term Investment Security: Backed by a 15-year product warranty and a 30-year linear performance warranty (88.85% output at Year 30) with Munich RE reinsurance.

Best Price Guaranteed

Description

The AIKO 770W Stellar 2N+78 (Model: AIKO-A770-GRH78Dw) is a high-capacity, dual-glass bifacial photovoltaic module built on N-type All Back Contact (ABC) cell technology. Unlike conventional PERC or TOPCon modules that have metallic gridlines across the front surface, ABC architecture relocates all electrical contacts to the rear of the cell. This eliminates front-side optical shading losses, allowing maximum sunlight absorption while capturing reflected ground or rooftop light on the rear side.

Designed specifically for commercial enterprises, manufacturing factories, EPC contractors, and utility-scale solar developers, this module addresses key energy challenges in Bangladesh. With rising industrial grid tariffs, frequent power fluctuations, and limited rooftop area in industrial zones like Dhaka, Gazipur, Chattogram, and Narayanganj, the AIKO 770W Stellar 2N+78 enables businesses to generate significantly higher clean energy from a smaller footprint.

Key Features

  • 770W High Power Rating: Delivers 770Wp under Standard Test Conditions (STC) and up to 845W under Bifacial Nameplate Irradiance (BNPI) with an 80% ±5% bifaciality factor.

  • 24.0% Module Conversion Efficiency: High active cell area maximizes power density per square meter.

  • N-Type ABC Cell Architecture: Zero front-grid shading, zero LID (Light-Induced Degradation), and enhanced micro-crack resistance.

  • Partial Shading Optimization: Cell-level current bypass capability limits localized power drops and prevents dangerous hotspot formation.

  • 2.0 + 2.0 mm Dual-Glass Construction: Semi-tempered front and rear glass encapsulates the 156 half-cut cells against moisture ingress and PID (Potential Induced Degradation).

  • 1500V DC System Compatibility: Supports longer PV strings, reducing DC cabling, combiner boxes, and inverter BOS expenses.

  • 30-Year Munich RE Backed Warranty: Guarantees ≤1% first-year degradation and ≤0.35% annual degradation from Year 2 to Year 30.

Technical Advantages

  • High Efficiency & Bifacial Gain: Combining 24.0% front-side efficiency with an 80% bifacial factor allows rear-side albedo reflection (from white-coated factory roofs or concrete) to boost total daily kWh yield.

  • Thermal Stability in Tropical Climates: A power temperature coefficient of -0.26%/°C ensures lower voltage and power drop when roof temperatures exceed 45°C–50°C in Bangladesh.

  • Durable Construction & Safety Protection: Rated for 5400 Pa front static load and 2400 Pa rear wind load, housed in an IP68-rated junction box with 3 bypass diodes, Protection Class II, and IEC Class A fire safety rating.

  • Lower Balance of System (BOS) Cost: Fewer modules are required to reach megawatt or multi-kilowatt targets, cutting mounting structure steel, installation labor, and DC wiring costs.

  • Easy Maintenance: Smooth, gridless front glass minimizes dust accumulation and simplifies routine water cleaning during dry winter months.

Applications

  • Commercial: Shopping malls, hospitals, hotels, and corporate towers seeking net-metering bill reductions.

  • Industrial & Factory: RMG (garment) factories, textile mills, cold storages, and steel/cement plants with large RCC or steel-shed rooftops.

  • Utility & Project Installation: Ground-mounted solar power plants, solar irrigation projects, and large-scale EPC installations.

  • Residential & Office: High-consumption multi-story residential complexes and commercial office buildings with reinforced mounting structures.

Why Choose This Product?

  • Proven Reliability: Certified under IEC 61215, IEC 61730, ISO 9001, ISO 14001, and ISO 45001, engineered to withstand monsoon winds, high humidity, and dust.

  • Superior Real-World Performance: Outperforms standard modules during overcast monsoon days, early mornings, late afternoons, and partial chimney/parapet shading.

  • Cost Effectiveness: High wattage per module lowers per-watt installation expenses and accelerates Return on Investment (ROI).

  • After-Sales Value: Supported by a 15-year manufacturing warranty and a 30-year linear output guarantee insured by Munich RE, ensuring bankability for commercial solar financing.

Technical Specification Table

Specification Details
Model AIKO-A770-GRH78Dw (Stellar 2N+78)
Brand AIKO Solar
Rated Power 770W (STC) / 845W (BNPI)
Voltage Vmp: 48.77V | Voc: 58.72V | Max System Voltage: 1500V DC
Current Imp: 15.79A | Isc: 16.64A | Max Series Fuse Rating: 30A
Frequency DC Output Module (Inverter-dependent AC frequency)
Efficiency 24.0%
Protection IP68 Junction Box (3 Bypass Diodes), Protection Class II, IEC Class A Fire Rating, 5400Pa Front / 2400Pa Rear Load
Dimension 2465 × 1303 × 33 mm
Weight 39.8 kg (±3%)
Operating Temperature -40°C to +85°C (Temp. Coefficient Pmax: -0.26%/°C)
Warranty Official Manufacturer Warranty Applicable.

Features List

  • ✓ 770W high-efficiency N-type ABC bifacial operation (24.0% efficiency)

  • ✓ Cell-level partial shading optimization with hotspot suppression

  • ✓ Advanced protection system with IP68 junction box and 1500V DC rating

  • ✓ 2.0 + 2.0 mm dual-glass construction for 30+ year service life

  • ✓ Superior low-light and high-temperature (-0.26%/°C) performance

  • ✓ Low maintenance requirement with anti-reflective coated glass

Benefits For Customers

  • Reduces Electricity Cost: Generates maximum daytime solar power to offset expensive industrial and commercial grid tariffs and maximize Bangladesh Net Metering export credits.

  • Improves Operational Reliability: Continues producing stable power even when nearby structures, pipes, or trees cast partial shadows across the array.

  • Saves Maintenance & BOS Cost: High 770W density reduces panel count, mounting hardware, cabling, and ongoing cleaning labor.

  • Suitable for Bangladesh Environment: Dual-glass encapsulation and low thermal degradation withstand high summer heat, heavy monsoon rain, and industrial dust.

Installation & Maintenance Guide

Installation Requirements:

  • Because of its large format (2465 × 1303 mm) and 39.8 kg weight, use heavy-duty hot-dip galvanized steel or anodized aluminum mounting rails rated for local wind loads.

  • Elevate the rear side above a reflective surface (white cool-roof coating or light concrete) and avoid rear-side rail obstruction to maximize the 80% bifacial gain.

  • Verify string Voc (58.72V) and Imp (15.79A) against your string or hybrid inverter MPPT voltage and current limits (ensure inverter MPPT supports ≥16A–20A per string).

Maintenance Tips:

  • Clean the front glass every 2 to 4 weeks during Bangladesh’s dry season (November–April) using soft water and a non-abrasive microfiber wiper or soft brush to remove dust and bird droppings.

  • Clean early in the morning or late in the evening when the glass is cool to prevent thermal shock.

  • Periodically inspect MC4 connectors, DC cables, and mounting clamps for tightness and corrosion.

Safety Instructions:

  • Solar modules generate lethal DC voltage whenever exposed to light; cover the module surface with an opaque sheet during wiring or maintenance.

  • Never disconnect MC4 connectors under electrical load.

  • Ensure all aluminum frames and mounting structures are properly grounded in compliance with BNBC (Bangladesh National Building Code) and IEC electrical standards.

FAQ Section

Q: What is the price of AIKO 770W Stellar 2N+78 Bifacial Solar Panel in Bangladesh?

A: The price of the AIKO 770W Stellar 2N+78 (AIKO-A770-GRH78Dw) solar panel in Bangladesh varies depending on order quantity (single piece vs. pallet/project volume) and current import exchange rates. Contact loopshop.com.bd directly for the latest retail or commercial project quotation.

Q: Where can I buy AIKO 770W Stellar 2N+78 Bifacial Solar Panel in Bangladesh?

A: You can purchase genuine AIKO 770W Stellar 2N+78 (AIKO-A770-GRH78Dw) bifacial solar panels online from loopshop.com.bd with nationwide delivery across Dhaka, Chattogram, Gazipur, Narayanganj, and all districts in Bangladesh.

Q: What warranty does this product have?

A: It includes a 15-year manufacturer product warranty covering materials and workmanship, alongside a 30-year linear performance warranty backed by Munich RE reinsurance that guarantees at least 88.85% of nominal power output at Year 30.

Q: Is this suitable for Bangladesh climate?

A: Yes. Its low temperature coefficient (-0.26%/°C) minimizes power loss during hot summer months, while its 2.0 + 2.0 mm dual-glass construction and IP68 junction box protect against monsoon humidity, heavy rain, and high winds.

Q: How to install this product?

A: The panel should be installed by a certified solar engineer on a reinforced, corrosion-resistant mounting structure tilted south at approximately 20°–23° for Bangladesh. Keep the rear glass unobstructed above a reflective surface to capture bifacial energy, and connect strings using 4mm² UV-resistant solar DC cables and MC4-compatible connectors.

Q: What is N-type ABC technology in the AIKO 770W panel?

A: ABC stands for All Back Contact. All metal busbars and electrical contacts are placed on the rear side of the cell, leaving the front 100% free of gridlines for higher sunlight absorption, better aesthetics, and improved efficiency (24.0%).

Q: How much extra power does the bifacial design generate?

A: With an 80% ±5% bifaciality factor, the rear side can boost total output up to 845W under BNPI test conditions, typically adding 5% to 20% extra real-world energy depending on roof reflectivity and mounting height.

Q: Is this solar panel suitable for Bangladesh Net Metering projects?

A: Yes, high-efficiency 770W N-type bifacial modules are widely used in commercial and industrial net-metering installations across Bangladesh to maximize rooftop capacity and reduce grid bills.

Q: What inverter current rating is required for the AIKO-A770-GRH78Dw?

A: Because the panel has a Maximum Power Current (Imp) of 15.79A and Short-Circuit Current (Isc) of 16.64A, it should be paired with modern high-current MPPT inverters rated for at least 16A to 20A per string.

Q: What are the physical dimensions and weight of one panel?

A: Each module measures 2465 mm × 1303 mm × 33 mm and weighs 39.8 kg (±3%), requiring at least two technicians for safe handling and installation.

Reviews

There are no reviews yet.

Be the first to review “AIKO AIKO-A770-GRH78Dw 770W Bifacial Solar Panel Commercial PV”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581