Description
The REC Alpha Pro M 610W Heterojunction Mono Solar Panel (Model: REC610AA Pro M) is a high-efficiency photovoltaic (PV) module combining crystalline N-type silicon wafers with thin-film amorphous silicon layers. This Heterojunction (HJT) architecture captures a broader spectrum of solar radiation while drastically reducing electron recombination losses.
Engineered specifically for factory rooftops, commercial buildings, cold storages, agricultural irrigation projects, and utility-scale solar plants, this 610W module supports 1500V DC string architectures. In Bangladesh—where industrial electricity tariffs are rising, factory roof space is valuable, and high ambient temperatures reduce conventional PERC panel output—the REC Alpha Pro M 610W maximizes kilowatt-hour yield per square meter while accelerating return on investment.
Key Features
-
610W High-Power Density (
21.5%Efficiency): Generates610 Wp(with0/+10Wpositive power tolerance) across a2.84 m²footprint, reducing the total number of panels, rails, and clamps needed per megawatt. -
Advanced Heterojunction (HJT) Cell Technology: Merges monocrystalline and amorphous silicon layers to deliver superior conversion efficiency, zero Light-Induced Degradation (LID), and enhanced low-light generation.
-
Ultra-Low Temperature Coefficient (
-0.24%/°C): Retains significantly more wattage when rooftop temperatures climb above 40°C compared to standard P-type or TOPCon modules. -
REC Twin Design & Solder-Free Interconnection: Splits the 120 half-cut cells into two independent twin sections with multi-wire solder-free connections to eliminate micro-cracks and maintain power output under partial shading.
-
1500V DC System Compatibility: Rated for
1500Vmaximum system voltage (Vmp: 36.3V,Voc: 44.3V,Imp: 16.81A,Isc: 17.72A), enabling longer strings and lower BOS cabling costs in large C&I projects.
Technical Advantages
-
High Efficiency & Low-Light Yield: Captures diffused sunlight effectively during early mornings, late afternoons, and overcast monsoon skies in Bangladesh.
-
Durable Construction: Features anti-reflective solar glass, support bars behind the frame (
2175 × 1305 × 30 mm,32.5 kg),5400 Pafront snow/wind load rating,2400 Parear wind load rating, and35 mmhail impact resistance. -
Certified Safety & Ingress Protection: Equipped with a 3-part IP68-rated junction box containing 3 bypass diodes, Stäubli MC4 EVO2 / PV-JM608 connectors, and a
35Amaximum series fuse rating. -
Maximum Energy & Cost Savings: Higher power per panel lowers per-watt racking, installation labor, and DC wiring costs while generating more clean electricity under Bangladesh’s Net Metering guidelines.
-
Low Maintenance Design: Anti-reflective glass surface resists dirt accumulation and cleans easily with routine water rinsing.
Applications
-
Residential: High-capacity residential rooftop on-grid and hybrid solar systems with limited roof area.
-
Commercial: Shopping malls, hospitals, hotels, universities, and cold storage facilities.
-
Industrial: Heavy manufacturing plants, steel/cement facilities, and utility-scale ground-mounted solar farms.
-
Factory: Ready-Made Garment (RMG) and textile factory rooftops operating under Net Metering policies.
-
Office: Corporate headquarters, banks, and IT parks seeking reliable daytime peak-load shaving.
-
Project Installation: Utility-scale solar parks, solar irrigation pump stations, and commercial EPC turnkey projects.
Why Choose This Product?
-
Proven Reliability: Manufactured by REC Group (Singapore) with solder-free HJT cells and reinforced frame support bars for long-term mechanical and electrical stability.
-
Superior Tropical Performance: Industry-leading
-0.24%/°Cthermal behavior ensures higher real-world energy generation during Bangladesh’s hot summer afternoons. -
Long-Term Cost Effectiveness: Guaranteed minimum
92%power output at Year 25 (only0.25%annual degradation after Year 1), protecting long-term project cash flows. -
Dedicated Local Support: Sourced for Bangladesh EPC contractors and businesses through LoopShop.com.bd with technical string-sizing consultation and nationwide project logistics.
Technical Specification Table
| Specification | Details |
| Model | REC610AA Pro M |
| Brand | REC |
| Rated Power | 610W (Power Tolerance: 0 / +10W) |
| Voltage | Vmp: 36.3V / Voc: 44.3V / Max System Voltage: 1500V DC |
| Current | Imp: 16.81A / Isc: 17.72A |
| Frequency | DC Output (0 Hz) |
| Efficiency | 21.5% |
| Protection | IP68 Junction Box (3 Bypass Diodes), Max Series Fuse: 35A, IEC 61215 / IEC 61730 / IEC 62716 |
| Dimension | 2175 × 1305 × 30 mm |
| Weight | 32.5 kg |
| Operating Temperature | -40°C to +85°C (NOCT: 44°C ± 2°C) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 610W high-output Heterojunction (HJT) monocrystalline solar module
-
✓ 21.5% module conversion efficiency with 0 to +10W positive tolerance
-
✓ Ultra-low
-0.24%/°Ctemperature coefficient for hot climates -
✓ Zero Light-Induced Degradation (LID) and solder-free cell connections
-
✓ REC Twin Design for improved partial-shading resilience
-
✓ 1500V DC maximum system voltage for commercial and utility strings
-
✓ Reinforced anodized aluminum frame rated up to 5400 Pa front load
-
✓ IP68-rated 3-part junction box with 3 bypass diodes
-
✓ 25-year performance warranty guaranteeing at least 92% output in Year 25
Benefits For Customers
-
Reduces Electricity Cost: Maximizes daytime solar generation per square foot of roof space, cutting industrial grid bills and accelerating Net Metering payback.
-
Improves Operational Reliability: HJT cells and Twin Design maintain high voltage and current stability even during extreme summer heat or partial rooftop shading.
-
Saves Installation & BOS Cost: High 610W output per module reduces mounting structures, DC cables, connectors, and installation labor hours.
-
Suitable for Bangladesh Environment: Engineered to withstand high ambient temperatures (
-40°Cto+85°C), heavy monsoon rains, and cyclonic wind loads (5400 Pafront /2400 Parear).
Installation & Maintenance Guide
Installation Requirements
-
Orientation & Tilt: Install modules facing true south at an optimal tilt angle of 15°–25° for commercial rooftops or ground mounts in Bangladesh to maximize annual yield.
-
Structural & Wind Load Compliance: Mount the
2175 × 1305 × 30 mm(32.5 kg) modules onto heavy-duty hot-dip galvanized steel or anodized aluminum racking engineered for coastal/cyclone wind speeds. -
Inverter & String Sizing: Verify string open-circuit voltage (
Voc: 44.3V) and operating current (Imp: 16.81A,Isc: 17.72A) against your on-grid or hybrid inverter MPPT limits (ensure MPPT supports ≥17A–20A input current). -
Grounding & Surge Protection: Bond all module frames to a dedicated earthing system and install DC/AC Surge Protection Devices (SPDs) and
35A-rated string fuses/breakers.
Maintenance Tips
-
Scheduled Surface Cleaning: Clean the anti-reflective solar glass every 2 to 4 weeks using clean, low-mineral water and a soft brush or microfiber mop to remove industrial dust and soot.
-
Thermal-Safe Cleaning Timing: Perform water washing early in the morning or after sunset when module glass temperatures are low.
-
Biannual System Inspection: Inspect MC4 connectors, DC string cables, earthing lugs, and mid/end mounting clamps every 6 months for tightness and corrosion-free integrity.
Safety Instructions
-
High-Voltage DC Hazard: A single module outputs
44.3V Vocand series strings can reach up to1500V DC; only qualified solar engineers should perform DC string connections using insulated tools. -
Never Disconnect Under Load: Always isolate the inverter AC and DC disconnects before unplugging MC4 connectors to prevent dangerous DC arc flash.
-
Proper Handling: Carry the
32.5 kgpanel using two technicians holding the aluminum frame—never lift by the junction box or cables, and never walk on the glass surface.
FAQ Section
Q: What is the price of REC Alpha Pro M 610W Heterojunction Mono Solar Panel in Bangladesh?
A: The price of the REC Alpha Pro M 610W Heterojunction Mono Solar Panel in Bangladesh varies depending on import lot, exchange rates, and commercial project quantity (typically around ৳15,500 to ৳19,500 per panel). Contact LoopShop.com.bd for live retail pricing and bulk EPC quotations.
Q: Where can I buy REC Alpha Pro M 610W Heterojunction Mono Solar Panel in Bangladesh?
A: You can purchase genuine REC Alpha Pro M 610W (REC610AA Pro M) solar panels online at LoopShop.com.bd with nationwide project delivery across Dhaka, Chattogram, Gazipur, Narayanganj, Savar, Sylhet, Khulna, and Rajshahi.
Q: What warranty does this product have?
A: The REC Alpha Pro M 610W carries a 20-year product warranty (upgradable to 25 years under the REC ProTrust program when installed by an REC Certified Solar Professional) and a 25-year linear power output warranty guaranteeing at least 92% output at Year 25.
Q: Is this suitable for Bangladesh climate?
A: Yes. With its ultra-low -0.24%/°C temperature coefficient, -40°C to +85°C operating temperature range, IP68 junction box, and 5400 Pa mechanical load rating, it performs exceptionally well in Bangladesh’s hot summers and heavy monsoon seasons.
Q: How to install this product?
A: Mount the panels on a south-facing galvanized steel or aluminum structure at a 15°–25° tilt, wire them in series strings matched to a commercial string or hybrid inverter MPPT (supporting ≥17A input current), and complete proper DC earthing and SPD protection.
Q: What is the exact model number, size, and weight of this REC 610W panel?
A: The exact model code is REC610AA Pro M. Each module measures 2175 × 1305 × 30 mm (2.84 m²) and weighs 32.5 kg.
Q: What makes Heterojunction (HJT) better than standard PERC or TOPCon solar panels?
A: HJT cells combine monocrystalline silicon with amorphous thin-film layers to eliminate Light-Induced Degradation (LID), deliver a lower temperature coefficient (-0.24%/°C), and generate more power in hot and low-light conditions.
Q: Which inverters are compatible with the REC Alpha Pro M 610W solar panel?
A: Because its maximum power current (Imp) is 16.81A and short-circuit current (Isc) is 17.72A, it should be paired with modern commercial string or hybrid inverters whose MPPT channels accept at least 17A–20A per string.
Q: Can this panel be used for Net Metering rooftop projects in Bangladesh?
A: Yes. High-efficiency REC Alpha Pro M 610W modules are ideal for commercial and industrial rooftop Net Metering installations where maximizing kW capacity per square foot of roof space is critical.
Q: Where is the REC Alpha Pro M 610W solar panel manufactured?
A: REC Alpha Pro M modules are engineered by REC Group (Norwegian solar brand) and manufactured in REC’s automated facility in Singapore.

Reviews
There are no reviews yet.