Schneider ATV320U15M2C 1.5kW 2HP Single Phase VFD Drive

Description

The Schneider Electric Altivar Machine ATV320 series variable speed drive (Model: ATV320U15M2C) is a high-performance compact AC drive engineered for controlling 3-phase electric motors rated up to 1.5kW (2HP). Operating from a standard 200–240V single-phase line input, it converts fixed utility power into variable frequency and variable voltage 3-phase output, offering precise motor speed, torque, and ramp control.

Designed tailored for original equipment manufacturers (OEMs), panel builders, and industrial maintenance teams in Bangladesh, the ATV320U15M2C fits easily into tight electrical cabinets with its compact form factor allowing vertical stacking. Built with coated circuit boards resistant to dust and atmospheric corrosion, it ensures uninterrupted performance under demanding Bangladeshi factory conditions.

Key Features

• Compact & Stackable Design: Features a slim compact enclosure that allows vertical mounting and side-by-side installation inside control cabinets to maximize panel space.
• Embedded Safety Standard: Built-in Safe Torque Off (STO) certified to SIL3 / PL e standard provides safety protection without requiring external contactors.
• Flexible Motor Control: Supports open-loop vector control (SVC), standard V/f, quadratic pump/fan energy-saving curves, and permanent magnet (PM) motor control.
• Integrated Communications: Equipped with standard Modbus RTU and CANopen communication ports via RJ45 interface for smooth PLC and HMI networking.
• Conformal Coated Electronics: Printed circuit boards meet IEC 60721-3-3 Class 3S2/3K5 environmental specifications, protecting sensitive electronics against dust and humidity.

Technical Advantages

• High Operational Efficiency: Delivers superior energy conversion efficiency (~97%) with low power loss (~61W under full rated load), maintaining cool panel temperatures.
• Durable Construction: Heavy-duty heat sink design with forced air cooling ensures stable long-term operational life in enclosed panels.
• Complete Electrical Protection: Onboard protective functions safeguard against short circuits between motor phases, input overvoltage/undervoltage, output phase loss, dynamic overcurrent, and thermal overload.
• Energy Saving: Dynamically adjusts motor magnetizing current based on actual load demand, significantly cutting kilowatt-hour (kWh) electricity usage.
• Simplified Maintenance: Integrated diagnostic LEDs, fault history registers, and compatibility with Schneider SoMove configuration software enable fast commissioning and troubleshooting.

Applications

• Industrial Manufacturing: Packaging machines, material handling conveyors, labeling systems, and automated sorting units.
• Factory Automation: Textile spinning and weaving equipment, garment washing machinery, light machine tools, and mechanical actuators.
• Commercial & HVAC: Centrifugal exhaust fans, water supply booster pumps, industrial blowers, and lifting mechanisms.
• Project Installation: Custom OEM control panels, sub-distribution control boxes, and equipment modernizations across Dhaka and all over Bangladesh.

Why Choose This Product?

• Unmatched Reliability: Premium quality engineered by Schneider Electric, meeting international safety and quality standards (IEC 61800-5-1, CE, UL, CSA, RCM).
• Superior Performance: Delivers up to 150–200% dynamic starting torque at low speeds, preventing motor stall during heavy startup conditions.
• Cost Effectiveness: Allows running 3-phase 220V motors directly on a single-phase 220V line supply, avoiding expensive three-phase utility service connections.
• After-Sales Value: Supported locally in Bangladesh with accessible spare parts, standardized programming tools, and reliable technical documentation.

Technical Specification Table

Features List

✓ 1.5kW (2HP) heavy-duty continuous output capacity for 220V motors

✓ Single-phase 200–240V input to 3-phase output conversion

✓ Embedded Safe Torque Off (STO) SIL3 functional safety standard

✓ Integrated Modbus RTU and CANopen communication protocols

✓ Built-in Class C2 EMC filter for reduced noise interference

✓ Compact stackable design supporting DIN-rail or panel mounting

✓ Conformal coated PCBs resistant to industrial dust and humidity

Benefits For Customers

• Reduces Electricity Cost: Soft acceleration and optimized partial load operation lower electrical demand and decrease energy bills.
• Improves Operational Reliability: Eliminates abrupt mechanical jolts during motor startup, protecting drive belts, gearboxes, and motor windings.
• Saves Maintenance Cost: Smooth speed acceleration and controlled deceleration minimize mechanical wear, extending machine service life.
• Suitable for Bangladesh Environment: Handles ambient temperatures up to 50°C and input line variations without nuisance tripping.

Installation & Maintenance Guide

Installation Requirements:

1. Mounting Position: Mount vertically on a flat, non-flammable surface inside a well-ventilated electrical panel enclosure.
2. Clearance Spacing: Maintain at least 100mm clearance above and below the drive for adequate vertical convective cooling; vertical stacking and zero-clearance side-by-side mounting are supported up to 50°C ambient temperature.
3. Power Wiring: Wire single-phase main power supply (L1, L2/N) to input terminals through a properly rated circuit breaker (MCB/MCCB) and semiconductor fuses. Wire output motor leads (U, V, W) using shielded 4-core cable.
4. Earthing/Grounding: Ensure a direct low-impedance ground conductor is connected between the drive PE ground terminal, enclosure mounting plate, and motor frame.

Maintenance Tips:

• Dust Management: Periodically blow clean, dry compressed air (max 2 bar) through the heat sink cooling fins every 3–6 months to prevent thermal restriction.
• Cooling Fan Inspection: Verify that internal cooling fans rotate freely without unusual noise or vibration.
• Terminal Verification: Check and retighten all power and control terminals during routine maintenance to prevent loose high-resistance connections.

Safety Instructions:

• Capacitor Discharge: Disconnect main power supply and wait at least 15 minutes before touching electrical connections to allow internal high-voltage DC bus capacitors to fully discharge.
• Insulation Testing: Do not perform Megger high-voltage insulation tests directly on VFD terminal terminals; disconnect all motor leads prior to testing motor insulation.

Frequently Asked Questions (FAQ)

Q: What is the price of Schneider ATV320U15M2C 1.5kW VFD in Bangladesh?

A: The price of the Schneider ATV320U15M2C 1.5kW single-phase VFD in Bangladesh varies based on import duties, stock availability, and exchange rates. Check live pricing listed on loopshop.com.bd or contact our sales hotline for a quote.

Q: Where can I buy original Schneider ATV320U15M2C VFD in Bangladesh?

A: You can purchase genuine Schneider Electric ATV320 series VFDs directly online at loopshop.com.bd with guaranteed product authenticity, VAT invoice, and fast delivery across Bangladesh.

Q: Can I run a 3-phase motor using single-phase 220V electricity with this VFD?

A: Yes, the ATV320U15M2C converts 200–240V single-phase input into balanced 3-phase 220V output to run standard 1.5kW (2HP) 3-phase induction motors (wired in delta configuration).

Q: What warranty does this product have on loopshop.com.bd?

A: Standard manufacturer line warranty or seller warranty terms apply at the time of order placement. Please contact loopshop.com.bd customer support to verify current warranty details.

Q: Is the Schneider ATV320U15M2C suitable for Bangladesh climate conditions?

A: Yes, it is built with conformal coated electronic circuit boards (Class 3S2/3K5) and operates reliably up to 50°C ambient temperatures without derating, making it ideal for Bangladeshi factory conditions.

Q: How do I control the speed of this VFD remotely?

A: Speed can be adjusted using an external 0–10V DC potentiometer, 4–20mA signal, multi-speed digital inputs, or Modbus RTU / CANopen serial communication from a PLC or HMI.

Q: What is the rated continuous current output of ATV320U15M2C?

A: The drive provides a continuous nominal output current rating of 7.9 Amperes under heavy-duty 200–240V 3-phase output operation.

Q: Does the ATV320U15M2C require an external brake resistor?

A: The drive features an integrated braking transistor. For high inertia loads or fast deceleration requirements, an external dynamic braking resistor can be connected directly to the drive.

Q: How to install this product safely in an electrical panel?

A: Mount vertically inside a ventilated cabinet, maintaining clear top and bottom airflow. Wire single-phase input to L1/L2 and motor wires to U/V/W according to Schneider wiring schematics while securing ground grounding.

Q: Does this drive include built-in safety functions?

A: Yes, it features integrated Safe Torque Off (STO) certified to SIL3 / PL e safety standards, enabling functional safety compliance without extra contactors.