Description
The Luminous Optimus 2800 is a high-capacity 2500VA (2000W) 24V Pure Sine Wave IPS and Home UPS inverter engineered for dependable, quiet power backup. Operating on two 12V batteries wired in series (24V DC), it converts stored DC energy into clean sine wave AC output during grid interruptions while recharging the battery bank once utility power returns.
It is designed for homeowners, remote professionals, shop owners, clinics, and office operators who run sensitive electronics alongside multiple household or commercial appliances. Across Bangladesh—where frequent load shedding and fluctuating grid power disrupt daily work and comfort—the Luminous Optimus 2800 keeps fans, lighting, televisions, routers, and computers running smoothly without electrical hum or sudden resets.
Key Features
-
2000W Rated Output Capacity (2500VA Class): Supports heavy residential and commercial backup loads across multiple rooms or workstations.
-
Pure Sine Wave Output: Delivers smooth, clean AC power safe for sensitive electronics and inductive appliances.
-
24V Dual-Battery Architecture: Operates on two 12V batteries connected in series, supporting Flat Plate, Tubular, and SMF (VRLA) battery types.
-
User-Settable Charging Current (8A–21A): Lets installers adjust charging current to match connected battery capacities and recharge needs.
-
Selectable Output Voltage (200V–240V): Allows users to balance extended backup runtime against higher appliance voltage performance.
-
Smart LCD Display & Mode Selector: Displays real-time operational statistics and alerts alongside switchable ECO and UPS modes.
-
Mains MCB & Bypass Protection: Includes input mains circuit protection and a bypass switch for direct utility pass-through when needed.
Technical Advantages
-
Clean Waveform for Sensitive Loads: Pure sine wave output reduces motor hum in fans and protects power supplies in routers, laptops, desktops, and audiovisual equipment.
-
Lower DC Current Stress on 24V Bus: A 24V series battery bank reduces DC current draw at 2000W output compared to 12V systems of equivalent wattage.
-
Low-Voltage Charging Initiation: Begins battery charging from low input voltage (around 95V AC) to help recover batteries during brownouts.
-
Service Continuity via Bypass Switch: Allows utility power to feed connected loads directly if the unit requires maintenance or servicing.
-
Clear Diagnostics & Protection: Multi-parameter LCD readouts and electronic protections (overload, short circuit, over-temperature, overcharging, low battery) support safe daily operation.
Applications
-
Residential: Apartments, duplex homes, and family residences running ceiling fans, LED lighting, televisions, routers, and compatible household appliances.
-
Commercial: Retail shops, pharmacies, diagnostic centers, and billing counters requiring reliable backup power.
-
Industrial: Light workshop control desks, testing benches, and auxiliary lighting circuits.
-
Factory: Administrative offices, security cabins, and small quality-control stations.
-
Office: Small-to-medium offices, workstations, networking equipment, and CCTV setups.
-
Project Installation: Backup power setups for classrooms, security hubs, and communication enclosures.
Why Choose This Product?
-
Proven Brand Engineering: Manufactured by Luminous, a widely recognized power backup brand.
-
Clean Power for Modern Loads: Pure sine wave output handles both standard lighting/fan loads and sensitive electronics.
-
Flexible Configuration: Adjustable charging current, selectable output voltage, and ECO/UPS modes adapt to real-world site conditions.
-
Local Purchase & Support: Available through loopshop.com.bd with convenient online ordering and customer support in Bangladesh.
Technical Specification Table
| Specification | Details |
| Model | Optimus 2800 |
| Brand | Luminous |
| Rated Power | 2000 W (2500 VA class) |
| Voltage | 24V DC (2 x 12V Batteries in Series) / 200V–240V AC Selectable Output |
| Current | User-Settable Charging Current: 8A–21A (Max 21A) |
| Frequency | 50 Hz |
| Efficiency | Pure Sine Wave Output |
| Protection | Overload, Short Circuit, Over-Temperature, Low Battery, Overcharging |
| Dimension | 30.0 x 32.6 x 28.4 cm (300 x 326 x 284 mm) |
| Weight | 22.5 kg |
| Operating Temperature | Indoor Ambient Operation (0°C to 45°C Typical) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 2000W rated output capacity (2500VA class) on a 24V dual-battery system
-
✓ Pure sine wave output for quiet, clean appliance operation
-
✓ Compatible with two 12V Flat Plate, Tubular, and SMF batteries in series
-
✓ User-settable charging current (8A–21A) and output voltage (200V–240V)
-
✓ Switchable ECO and UPS modes for flexible load protection
-
✓ Smart LCD display and bypass switch
-
✓ Overload, short-circuit, over-temperature, and low-battery protection
Benefits For Customers
-
Protects Sensitive Electronics: Pure sine wave output supports routers, computers, and household appliances with quieter motor operation and reduced electrical noise.
-
Improves Daily Reliability: Keeps essential lighting, fans, and internet connectivity active during load shedding in Bangladesh.
-
Customizable Battery & Load Tuning: Adjustable charging current and output voltage options help match your battery capacity and runtime requirements.
-
Easier Fault Handling: A bypass switch and mains MCB help maintain utility power feed during checks or servicing.
Installation & Maintenance Guide
Installation Requirements:
-
Install the inverter indoors on a dry, level surface or dual-battery trolley with adequate ventilation and open clearance (at least 15 cm) around cooling vents.
-
Connect two compatible 12V batteries of matching rating in series to form a 24V DC bank using thick, properly crimped battery cables with clean, tight lugs.
-
Configure the battery type, charging current (8A–21A), output voltage (200V–240V), and operating mode (UPS or ECO) to match your connected battery bank and appliances.
-
Connect the AC input to a properly earthed mains supply and wire only approved backup loads to the output circuit.
Maintenance Tips:
-
Periodically inspect battery terminals and the series interconnect cable for corrosion or loose lugs and keep them clean and secure.
-
For flooded Tubular or Flat Plate batteries, check electrolyte levels regularly and top up only with distilled water as recommended by the battery manufacturer.
-
Wipe dust from the enclosure and ventilation slots with a dry cloth so airflow remains unobstructed.
-
Avoid running total load continuously near maximum capacity to prevent unnecessary thermal or overload trips.
Safety Instructions:
-
Verify positive (
+) and negative (-) polarity and 24V series connections carefully before powering on the inverter. -
Do not connect heavy high-wattage appliances such as air conditioners, geysers, irons, microwaves, or water pumps beyond the inverter’s safe load limits.
-
Turn off the inverter and disconnect AC mains and battery leads before performing any wiring work, cleaning, or inspection.
-
Keep the unit and battery bank away from water, moisture, open flames, and children.
FAQ Section
Q: What is the price of Luminous Optimus 2800 in Bangladesh?
A: Prices for the Luminous Optimus 2800 in Bangladesh vary depending on current import pricing, promotions, and seller stock. Please check the current price listed on loopshop.com.bd for the latest offer.
Q: Where can I buy Luminous Optimus 2800 in Bangladesh?
A: You can buy the Luminous Optimus 2800 online in Bangladesh from loopshop.com.bd, with delivery available across the country.
Q: What warranty does this product have?
A: The Luminous Optimus 2800 comes with a 24-month (2-year) warranty. Check the product warranty terms at purchase for coverage details.
Q: Is this suitable for Bangladesh climate?
A: Yes, it is well suited for homes, shops, and offices in Bangladesh experiencing frequent load shedding and warm weather, provided it is installed indoors with proper ventilation.
Q: How to install this product?
A: Place the inverter in a ventilated indoor spot, wire two 12V batteries in series to create a 24V DC bank with matching + and - polarity, configure the battery and mode settings, and connect the AC input and backup load wiring. Having a qualified electrician handle distribution wiring is recommended.
Q: Does the price include two 12V batteries?
A: No, the inverter unit is listed separately unless a specific bundle is stated on the product page. Two compatible 12V batteries wired in series are required for 24V operation.
Q: What battery types can be used with Luminous Optimus 2800?
A: It supports two 12V Flat Plate, Tubular, and SMF (VRLA) batteries connected in series.
Q: Can I run a Wi-Fi router or computer on this inverter?
A: Yes, its pure sine wave output and UPS mode are designed to support sensitive electronics such as routers, computers, and home appliances within the 2000W rating.
Q: What does the bypass switch do?
A: The bypass switch allows utility power to feed the output circuit if the inverter encounters a fault or needs servicing.
Q: How should I calculate my appliance load for a 2000W inverter?
A: Add up the wattage of every fan, light, router, and appliance you plan to run together during an outage and keep the combined load—including motor startup surges—comfortably within the 2000W rating.

Reviews
There are no reviews yet.