Description
The Luminous Optimus 2300 is a microprocessor-controlled 2000VA (1600W) 24V Pure Sine Wave IPS and Home UPS inverter engineered for dependable, low-noise power backup. Operating on two 12V batteries wired in series (24V DC), it converts stored DC energy into clean sine wave AC power during utility outages while automatically recharging the battery bank once grid power returns.
It is designed for homeowners, remote workers, retail shop owners, clinics, and office operators who run sensitive electronics alongside multiple household or commercial appliances. Across Bangladesh—where frequent load shedding and fluctuating grid power disrupt daily routines and productivity—the Luminous Optimus 2300 keeps fans, lighting, televisions, Wi-Fi routers, and computers running smoothly without electrical hum or sudden resets.
Key Features
-
1600W Rated Output Capacity (2000VA Class): Supports heavy residential and commercial backup loads across multiple rooms or workstations.
-
Pure Sine Wave Output: Delivers smooth, low-distortion AC power safe for sensitive electronics and inductive motors.
-
24V Dual-Battery Architecture: Operates on two 12V batteries (80Ah–220Ah) connected in series, supporting Flat Plate, Tubular, and SMF (VRLA) battery types.
-
Adjustable Charging Current: Lets installers tune charging current (up to 18A–21A depending on batch/variant) to suit connected battery capacities.
-
Selectable Output Voltage (200V–240V): Allows users to balance extended backup duration against higher appliance voltage performance.
-
ECO & UPS Mode Selection: Switch between regulated UPS operation for IT loads and wider mains tolerance in ECO mode to conserve battery cycles.
-
Informative LCD Display & Bypass Switch: Displays real-time operational data and alerts, paired with a bypass switch for direct utility pass-through during servicing.
Technical Advantages
-
Clean Waveform for Sensitive Loads: Pure sine wave output reduces motor hum in fans and protects power supplies in routers, laptops, desktops, and audiovisual gear.
-
Lower DC Current Stress on 24V Bus: A 24V series battery bank reduces DC current draw at 1600W output compared to 12V systems of equivalent wattage.
-
Service Continuity via Bypass Switch: A built-in bypass switch allows utility mains to feed connected loads directly if the unit requires maintenance.
-
Quiet Indoor Operation: Low acoustic noise makes it suitable for living spaces, study rooms, and office cabins.
-
Clear Diagnostics & Protection: Multi-parameter LCD readouts and electronic protections (overload, short circuit, over-temperature, deep discharge) support safe daily operation.
Applications
-
Residential: Apartments, duplex homes, and family residences running ceiling fans, LED lighting, televisions, routers, and compatible household appliances.
-
Commercial: Retail shops, pharmacies, diagnostic centers, and billing counters requiring reliable backup power.
-
Industrial: Light workshop control desks, testing benches, and auxiliary lighting circuits.
-
Factory: Administrative offices, security cabins, and small quality-control stations.
-
Office: Small-to-medium offices, workstations, networking equipment, and CCTV setups.
-
Project Installation: Backup power setups for classrooms, security hubs, and communication enclosures.
Why Choose This Product?
-
Proven Brand Engineering: Manufactured by Luminous, a widely recognized power backup brand.
-
Clean Power for Modern Loads: Pure sine wave output handles both standard lighting/fan loads and sensitive electronics.
-
Flexible Configuration: Adjustable charging current, selectable output voltage, and dual ECO/UPS modes adapt to real-world site conditions.
-
Local Purchase & Support: Available through loopshop.com.bd with convenient online ordering and customer support in Bangladesh.
Technical Specification Table
| Specification | Details |
| Model | Optimus 2300 |
| Brand | Luminous |
| Rated Power | 1600 W (2000 VA class) |
| Voltage | 24V DC (2 x 12V Batteries in Series) / 220V–230V AC Output |
| Current | Max Charging Current: Up to 18A–21A (Selectable) |
| Frequency | 50 Hz (± 0.5 Hz) |
| Efficiency | >80% (Pure Sine Wave Class) |
| Protection | Overload, Short Circuit, Deep Discharge, Over-Temperature, Reverse Polarity |
| Dimension | 30.0 x 32.6 x 28.4 cm (300 x 326 x 284 mm) |
| Weight | 21.0 kg |
| Operating Temperature | Indoor Ambient Operation (0°C to 45°C Typical) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 1600W rated output capacity (2000VA class) on a 24V dual-battery system
-
✓ Pure sine wave output for quiet, clean appliance operation
-
✓ Compatible with two 12V Flat Plate, Tubular, and SMF batteries in series
-
✓ Selectable charging current and output voltage (200V–240V)
-
✓ Switchable ECO and UPS modes for flexible load protection
-
✓ Multi-information LCD display and manual bypass switch
-
✓ Overload, short-circuit, deep-discharge, and over-temperature protection
Benefits For Customers
-
Protects Sensitive Electronics: Pure sine wave output supports routers, computers, and household appliances with quieter motor operation and reduced electrical noise.
-
Improves Daily Reliability: Keeps essential lighting, fans, and internet connectivity active during load shedding in Bangladesh.
-
Customizable Battery & Load Tuning: Adjustable charging settings and output voltage options help match your battery capacity and runtime requirements.
-
Easier Fault Handling: A manual bypass switch helps keep utility power flowing to connected loads if servicing is needed.
Installation & Maintenance Guide
Installation Requirements:
-
Install the inverter indoors on a dry, level surface or dual-battery trolley with adequate ventilation and open clearance around cooling vents.
-
Connect two compatible 12V batteries of matching rating in series to form a 24V DC bank using thick, properly crimped battery cables with clean, tight lugs.
-
Configure the battery type, charging current, output voltage, and operating mode (UPS or ECO) to match your connected battery bank and appliances.
-
Connect the AC input to a properly earthed mains supply and wire only approved backup loads to the output circuit.
Maintenance Tips:
-
Periodically inspect battery terminals and the series interconnect cable for corrosion or loose lugs and keep them clean and secure.
-
For flooded Tubular or Flat Plate batteries, check electrolyte levels regularly and top up only with distilled water as recommended by the battery manufacturer.
-
Wipe dust from the enclosure and ventilation slots with a dry cloth so airflow remains unobstructed.
-
Avoid running total load continuously near maximum capacity to prevent unnecessary thermal or overload trips.
Safety Instructions:
-
Verify positive (
+) and negative (-) polarity and 24V series connections carefully before powering on the inverter. -
Do not connect heavy high-wattage appliances such as air conditioners, geysers, irons, microwaves, or water pumps to the inverter output.
-
Turn off the inverter and disconnect AC mains and battery leads before performing any wiring work, cleaning, or inspection.
-
Keep the unit and battery bank away from water, moisture, open flames, and children.
FAQ Section
Q: What is the price of Luminous Optimus 2300 in Bangladesh?
A: Prices for the Luminous Optimus 2300 in Bangladesh vary depending on current import pricing, promotions, and seller stock. Please check the current price listed on loopshop.com.bd for the latest offer.
Q: Where can I buy Luminous Optimus 2300 in Bangladesh?
A: You can buy the Luminous Optimus 2300 online in Bangladesh from loopshop.com.bd, with delivery available across the country.
Q: What warranty does this product have?
A: The Luminous Optimus 2300 comes with a 24-month (2-year) warranty. Check the product warranty terms at purchase for coverage details.
Q: Is this suitable for Bangladesh climate?
A: Yes, it is well suited for homes, shops, and offices in Bangladesh experiencing frequent load shedding and warm weather, provided it is installed indoors with proper ventilation.
Q: How to install this product?
A: Place the inverter in a ventilated indoor spot, wire two 12V batteries in series to create a 24V DC bank with matching + and - polarity, configure the battery and mode settings, and connect the AC input and backup load wiring. Having a qualified electrician handle distribution wiring is recommended.
Q: Does the price include two 12V batteries?
A: No, the inverter unit is listed separately unless a specific bundle is stated on the product page. Two compatible 12V batteries wired in series are required for 24V operation.
Q: What battery types can be used with Luminous Optimus 2300?
A: It supports two 12V Flat Plate, Tubular, and SMF (VRLA) batteries connected in series.
Q: Can I run a Wi-Fi router or computer on this inverter?
A: Yes, its pure sine wave output and UPS mode are designed to support sensitive electronics such as routers, computers, and home appliances within the 1600W rating.
Q: What does the bypass switch do?
A: The bypass switch allows utility power to feed the output circuit if the inverter encounters a fault or needs servicing.
Q: How should I calculate my appliance load for a 1600W inverter?
A: Add up the wattage of every fan, light, router, and appliance you plan to run together during an outage and keep the combined load comfortably within the 1600W rating.

Reviews
There are no reviews yet.