Luminous Eco Watt 1750 1500VA 1260W 12V Single Battery IPS UPS

  • High-Capacity Single-Battery Power Backup: Delivers 1500VA / 1260W continuous AC power from a single 12V battery, eliminating the cost and space of a second battery.

  • Adaptive Battery Charging Control (ABCC): Microprocessor-regulated 3-stage charging optimizes charge current for Tubular, Flat Plate, SMF, and Local batteries (150Ah–250Ah) to maximize battery service life.

  • Engineered for Bangladesh Grid Conditions: Rapid battery recharge and wide input voltage tolerance handle frequent load shedding and seasonal voltage fluctuations across urban and semi-urban districts.

  • Dual ECO & UPS Modes: UPS Mode maintains regulated output (180V–260V) for IT loads, while ECO Mode widens the mains window (90V–290V) to reduce unnecessary battery drain.

  • Comprehensive Electronic Protection: Safeguards connected appliances and internal circuitry against overload, short circuit, overcharging, over-temperature, and deep discharge.

Best Price Guaranteed

Description

The Luminous Eco Watt 1750 is a high-capacity, microprocessor-controlled 1500VA (1260W) single-battery IPS and Home UPS inverter engineered for heavy household and commercial backup loads. Operating on a single 12V DC battery bank, it converts stored DC energy into stable 220V–230V AC output during utility grid interruptions while managing adaptive multi-stage charging once mains power returns.

Designed for larger multi-bedroom apartments, retail showrooms, pharmacies, and small-to-medium offices, this unit provides 1260W of usable load capacity without requiring an expensive 24V dual-battery setup. Across Bangladesh—where frequent load shedding, prolonged power cuts, and fluctuating grid voltages disrupt daily routines—the Luminous Eco Watt 1750 delivers rapid battery recovery and consistent power continuity for multiple ceiling fans, LED lighting circuits, televisions, and networking equipment.

Key Features

  • 1500VA / 1260W High Load Capacity: Comfortably powers 5 to 6 ceiling fans, 8 to 10 LED lights, an LED television, and a broadband Wi-Fi router simultaneously.

  • Single 12V Battery Architecture: Runs a 1.5 kVA / 1260W load on just one 12V battery (150Ah–250Ah), saving the upfront cost and maintenance of a second battery.

  • Adaptive Battery Charging Control (ABCC): Intelligent 3-stage smart charging adjusts current flow to prevent overcharging, minimize electrolyte evaporation, and extend battery lifespan.

  • Rapid Battery Recharging: High-speed charging circuitry restores battery capacity quickly between consecutive load-shedding intervals.

  • Universal Battery Type Support: Dedicated charging profiles tailored for Tubular, Flat Plate, SMF/VRLA, and Local 12V lead-acid batteries.

  • Switchable UPS & ECO Modes: UPS Mode regulates output voltage between 180V and 260V for IT hardware, while ECO Mode widens the mains acceptance window (90V–290V) to conserve battery cycles.

  • Fast Switchover Time: Sub-20 millisecond changeover prevents Wi-Fi routers and point-of-sale terminals from rebooting during sudden power outages.

Technical Advantages

  • Significant Capital Cost Savings (1.5 kVA on 12V): Most 1500VA inverters require a 24V two-battery bank; operating at 12V DC eliminates the purchase cost, trolley space, and replacement expense of a second battery.

  • Intelligent Thermal & Overload Management: Smart microprocessor sensing isolates the output stage during severe overloads or thermal spikes, protecting internal MOSFETs and transformer windings during inductive fan startup surges.

  • 3-Stage CC/CV Battery Conditioning: Constant Current, Constant Voltage, and Float charging stages prevent plate sulfation and prolong battery service life under daily cycling.

  • Clear Front-Panel LED Diagnostics: Intuitive status LEDs provide immediate visual alerts for mains status, charging progress, backup mode, low battery, and overload conditions.

  • Low Acoustic Noise & Low Maintenance: Solid-state control electronics and ventilated housing ensure quiet indoor operation with minimal upkeep.

Applications

  • Residential: Multi-bedroom apartments, duplex homes, and family residences running multiple ceiling fans, LED lighting circuits, televisions, laptops, and Wi-Fi routers.

  • Commercial: Retail stores, pharmacies, diagnostic sample collection centers, and POS billing counters requiring uninterrupted lighting and checkout operation.

  • Office: Small-to-medium corporate offices, coworking workstations, IT networking closets, and CCTV surveillance hubs.

  • Project Installation: Backup power retrofits for educational classrooms, telecom repeaters, and security access panels.

Why Choose This Product?

  • Proven Brand Reliability: Manufactured by Luminous Power Technologies, one of South Asia’s most trusted names in residential and commercial power electronics.

  • Maximum Power on a Single Battery: Delivers 1260W load capacity from one 12V battery, offering an unmatched balance of high output and low system cost.

  • Engineered for Bangladesh Grid Conditions: Rapid recharge performance and wide ECO mode input voltage tolerance ensure consistent backup during frequent load shedding.

  • Dependable After-Sales Support: Backed by warranty coverage and responsive technical assistance through loopshop.com.bd.

Technical Specification Table

Specification Details
Model Eco Watt 1750
Brand Luminous
Rated Power 1500 VA / 1260 W
Voltage 12V DC (Single Battery) / 220V–230V AC Output
Current Not Available
Frequency 50 Hz
Efficiency Not Available
Protection Overload, Short Circuit, Overcharging, Over-Temperature, Deep Discharge
Dimension Not Available
Weight Not Available
Operating Temperature Not Available
Warranty Official Manufacturer Warranty Applicable.

Features List

  • ✓ 1500VA / 1260W continuous load capacity on a single 12V battery

  • ✓ Adaptive Battery Charging Control (ABCC) 3-stage smart charging technology

  • ✓ Compatible with Tubular, Flat Plate, SMF, and Local batteries (150Ah–250Ah)

  • ✓ Rapid battery charging for quick recovery between frequent power cuts

  • ✓ Switchable UPS Mode (180V–260V) and ECO Mode (90V–290V)

  • ✓ Fast changeover time (less than 20 milliseconds) for uninterrupted Wi-Fi and electronics

  • ✓ Complete electronic protection against overload, short circuit, overcharging, and overheating

  • ✓ Clear front-panel LED indicators with audible fault alarms

Benefits For Customers

  • Saves the Cost of a Second Battery: Runs 1260W of household or office load using a single 12V battery instead of two, cutting upfront battery expenditure in half.

  • Powers Large Household Loads: Comfortably supports 5 to 6 ceiling fans, multiple LED lights, a TV, and a Wi-Fi router simultaneously without tripping.

  • Extends Battery Lifespan: Adaptive 3-stage charging prevents overcharging and premature plate degradation, reducing long-term battery replacement expenses.

  • Rapid Recovery Between Power Cuts: High-speed charging replenishes battery capacity quickly during short grid availability windows.

  • Uninterrupted Connectivity: Fast switchover time keeps broadband routers, laptops, and POS terminals running smoothly during sudden outages.

Installation & Maintenance Guide

Installation Requirements:

  • Install the inverter indoors on a sturdy, dry surface or single-battery trolley in a well-ventilated location away from direct sunlight, rain, or moisture.

  • Maintain at least 15 cm of open clearance around all cooling vents to ensure unrestricted airflow.

  • Connect a single high-capacity 12V lead-acid battery (recommended 200Ah–250Ah Tall Tubular to support the high 1260W discharge current) using heavy-gauge pure copper DC cables with secure terminal lugs.

  • Configure the rear battery-type selector switch (Tubular / Flat Plate / SMF) and mode switch (UPS / ECO) to match your connected battery and load type before powering on.

  • Plug the AC mains cord into a properly grounded 220V–230V wall socket protected by an appropriately rated MCB.

Maintenance Tips:

  • Inspect battery terminals every 2 to 3 months; clean any white or bluish sulfation buildup and apply a thin coat of petroleum jelly to prevent corrosion.

  • For flooded Tubular or Flat Plate batteries, check electrolyte levels monthly and top up strictly with demineralized/distilled water—never add tap water or acid.

  • Wipe dust from the inverter cabinet and ventilation slots regularly using a dry cloth to prevent heat accumulation.

  • If power outages are infrequent, discharge the battery moderately once a month to keep the electrochemical plates active.

Safety Instructions:

  • Always verify DC cable polarity (Red to Positive +, Black to Negative -) before connecting the battery.

  • Never connect high-wattage inductive or heating appliances such as air conditioners, geysers, electric irons, microwaves, or water pumps to the inverter output.

  • Turn off the front power button and disconnect both AC mains and battery leads before performing any electrical servicing.

  • Keep the battery and inverter away from open flames, sparks, and children.

FAQ Section

Q: What is the price of Luminous Eco Watt 1750 in Bangladesh?

A: The price of the Luminous Eco Watt 1750 (1500VA / 1260W) 12V inverter unit in Bangladesh typically ranges between BDT 15,000 and BDT 17,500, depending on current import duties and market availability. Check the top of this product page on loopshop.com.bd for the exact live price and ongoing offers.

Q: Where can I buy Luminous Eco Watt 1750 in Bangladesh?

A: You can order the genuine Luminous Eco Watt 1750 online directly from loopshop.com.bd with fast nationwide delivery across Dhaka, Chattogram, Sylhet, Khulna, Rajshahi, and all districts in Bangladesh, backed by official warranty support.

Q: What warranty does this product have?

A: The Luminous Eco Watt 1750 inverter unit comes with a 24-month (2-year) warranty covering internal electronic and transformer manufacturing defects.

Q: Is this suitable for Bangladesh climate?

A: Yes. Engineered for South Asian operating conditions, its ventilated chassis, thermal overload protection, and rapid battery charging circuitry make it well suited for Bangladesh’s warm climate and frequent load-shedding schedules.

Q: How to install this product?

A: Place the unit in a ventilated indoor area, connect the red DC cable to the + terminal and black cable to the - terminal of a single 12V battery, set the rear battery-type selector switch, plug the input cord into a grounded 220V wall socket, and connect your backup distribution line. Hiring a qualified electrician is recommended for home distribution board integration.

Q: Is a battery included with the Luminous Eco Watt 1750?

A: No, the listed price covers the Luminous Eco Watt 1750 inverter unit only. A compatible 12V battery (150Ah–250Ah) must be purchased separately.

Q: What battery size is recommended for a 1260W 12V inverter?

A: Because a 1260W load draws high DC current on a single 12V system, a 12V 200Ah or 250Ah Tall Tubular battery is strongly recommended to prevent excessive battery voltage drop and ensure long backup hours.

Q: How many fans and lights can 1260W run simultaneously?

A: With a 1260W rated capacity, it can comfortably power 5 to 6 ceiling fans, 8 to 10 LED lights, 1 LED TV, and 1 Wi-Fi router simultaneously. For optimal longevity, keep total continuous load below 75%–80% of rated capacity (around 950W–1000W).

Q: Can I run a Wi-Fi router and laptop on this IPS?

A: Yes. With a changeover time under 20 milliseconds and switchable UPS Mode (180V–260V), it keeps Wi-Fi routers, laptops, and LED TVs running smoothly during power outages.

Q: What is the main advantage of the Eco Watt 1750 over 24V 1500VA inverters?

A: Most 1500VA inverters require two 12V batteries wired in series (24V). The Luminous Eco Watt 1750 delivers 1500VA / 1260W on a single 12V battery, saving the purchase cost and space of a second battery.

Reviews

There are no reviews yet.

Be the first to review “Luminous Eco Watt 1750 1500VA 1260W 12V Single Battery IPS UPS”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581