Description
The Luminous Eco Watt 1650 (Eco Watt Neo 1650) is a heavy-duty, microprocessor-controlled 1500VA (1260W) 24V IPS and Home UPS inverter engineered for extended and high-load power backup. Operating on two 12V batteries wired in series (24V DC), the unit converts stored DC energy into stable 220V–230V AC output during utility grid interruptions while managing intelligent three-stage recharging once grid power returns.
Designed for multi-room residences, commercial retail showrooms, clinics, and small-to-medium offices, the 1260W capacity handles significantly larger appliance loads than 12V single-battery inverters. Across Bangladesh—where frequent load shedding, prolonged outages, and seasonal voltage drops disrupt daily operations—the Eco Watt 1650 starts battery charging even at low input voltages (100V–110V AC) and provides longer backup runtime through its 24V dual-battery bank.
Key Features
-
1500VA / 1260W High Load Capacity: Comfortably powers 5 to 6 ceiling fans, 8 to 10 LED lights, an LED television, and Wi-Fi networking equipment simultaneously.
-
24V Dual-Battery Architecture: Supports two 12V batteries connected in series for higher power efficiency, lower DC current stress, and extended backup duration.
-
Adaptive Battery Charging Control (ABCC): Intelligent 3-stage smart charging adjusts current (up to 17A) to prevent overcharging, reduce electrolyte evaporation, and extend battery life.
-
Low-Voltage Charging Capability: Commences battery charging even when grid input voltage drops to 100V–110V AC, ideal for fluctuating local feeders.
-
Universal Battery Type Support: Dedicated charging profiles for Tubular, Flat Plate, SMF/VRLA, and Local lead-acid batteries.
-
Switchable UPS & ECO Modes: UPS Mode regulates output voltage between 180V and 260V for IT hardware, while ECO Mode expands the input tolerance (100V–290V) to conserve battery cycles.
-
Fast Switchover Time: Sub-20 millisecond changeover prevents broadband routers and point-of-sale terminals from restarting during sudden outages.
Technical Advantages
-
Reduced DC Current Stress (24V System): Stepping up to a 24V DC bus halves the DC current draw compared to 12V systems at equivalent wattage, reducing cable heating and improving overall inverter conversion efficiency.
-
Intelligent Thermal & Overload Management: Built-in thermal sensors and auto-reset overload circuitry safeguard internal MOSFETs and transformer windings during inductive motor startup surges.
-
3-Stage CC/CV Battery Conditioning: Constant Current, Constant Voltage, and Float charging stages prevent plate sulfation and prolong battery bank longevity under daily cycling.
-
Clear Front-Panel LED Diagnostics: Intuitive status LEDs provide immediate visual alerts for mains status, charging progress, backup mode, low battery, and overload conditions.
-
Durable Construction & Low Maintenance: Solid-state microprocessor control and ventilated steel-and-ABS enclosure ensure dependable year-round operation with minimal upkeep.
Applications
-
Residential: Multi-bedroom apartments, duplex homes, and family residences running multiple ceiling fans, LED lighting circuits, televisions, laptops, and Wi-Fi routers.
-
Commercial: Retail showrooms, pharmacies, diagnostic centers, grocery stores, and POS billing counters requiring continuous lighting and checkout power.
-
Office: Small-to-medium corporate offices, coworking spaces, IT networking closets, and CCTV surveillance setups.
-
Project Installation: Backup power installations for educational classrooms, telecom repeaters, and security access control panels.
Why Choose This Product?
-
Proven Brand Reliability: Manufactured by Luminous Power Technologies, one of South Asia’s most trusted names in residential and commercial power electronics.
-
High Power & Long Runtime: The 1260W output paired with a 24V dual-battery bank handles heavy household and commercial lighting/fan loads effortlessly.
-
Engineered for Bangladesh Grid Conditions: Low-voltage charging initiation and wide ECO mode voltage acceptance ensure consistent performance during brownouts and frequent load shedding.
-
Reliable After-Sales Value: Backed by a 24-month warranty and responsive technical support through loopshop.com.bd.
Technical Specification Table
| Specification | Details |
| Model | Eco Watt 1650 (Eco Watt Neo 1650) |
| Brand | Luminous |
| Rated Power | 1500 VA / 1260 W |
| Voltage | 24V DC (Supports 2 x 12V Batteries) / 220V–230V AC Output |
| Current | Max Charging Current: 17A |
| Frequency | 50 Hz |
| Efficiency | Not Available |
| Protection | Overload, Short Circuit, Deep Discharge, Overcharge, Reverse Polarity, Over-Temperature |
| Dimension | 30.5 x 27.5 x 14.0 cm (305 x 275 x 140 mm) |
| Weight | 13.8 kg – 14.5 kg |
| Operating Temperature | Not Available |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 1500VA / 1260W continuous output capacity on a 24V dual-battery system
-
✓ Adaptive Battery Charging Control (ABCC) 3-stage smart charging technology
-
✓ Compatible with Tubular, Flat Plate, SMF/VRLA, and Local 12V batteries (two in series)
-
✓ Low-voltage battery charging starting from 100V–110V AC mains input
-
✓ Switchable UPS Mode (180V–260V) and ECO Mode (100V–290V)
-
✓ Fast changeover time (less than 20 milliseconds) for uninterrupted Wi-Fi and IT loads
-
✓ Comprehensive electronic protection against overload, short circuit, reverse polarity, and overheating
-
✓ Clear front-panel LED indicators for real-time power and fault status monitoring
Benefits For Customers
-
Supports Larger Appliance Loads: Runs up to 5–6 ceiling fans, multiple LED lights, a TV, and a Wi-Fi router simultaneously without tripping.
-
Extended Backup Hours: Utilizing two 12V batteries in a 24V configuration doubles stored energy capacity for long load-shedding periods.
-
Protects Battery Investment: Adaptive 3-stage charging prevents overcharging and premature plate sulfation, lowering long-term battery replacement costs.
-
Reliable Charging in Low-Voltage Areas: Continues charging batteries even when grid voltage dips to 100V–110V AC.
-
Seamless Connectivity: Sub-20ms switchover time prevents Wi-Fi routers, laptops, and billing terminals from rebooting during power outages.
Installation & Maintenance Guide
Installation Requirements:
-
Install the inverter indoors on a sturdy, dry surface or dual-battery trolley in a well-ventilated room away from direct sunlight, rain, or moisture.
-
Maintain at least 15 cm of open space around all cooling vents to ensure unrestricted airflow.
-
Connect two 12V batteries of identical brand, model, Ah rating, and age in series to form a 24V DC bank (connect Battery 1 Positive
+to Inverter Positive+, Battery 2 Negative-to Inverter Negative-, and link Battery 1 Negative-to Battery 2 Positive+with a heavy-duty series jumper cable). -
Configure the rear battery-type selector switch (Tubular / Flat Plate / SMF) and mode switch (UPS / ECO) before powering on.
-
Connect the AC mains input plug to a properly grounded 220V–230V wall outlet protected by an appropriately rated MCB.
Maintenance Tips:
-
Inspect all battery terminals and the series inter-battery jumper cable every 2 to 3 months; clean any sulfation buildup and apply petroleum jelly to prevent corrosion.
-
For flooded Tubular or Flat Plate batteries, check distilled water levels monthly across all cells of both batteries and top up strictly with demineralized/distilled water—never add tap water or acid.
-
Wipe dust from the inverter vents and top cover regularly with a dry cloth to prevent heat accumulation.
-
If power outages are infrequent, discharge the battery bank moderately once a month to keep battery chemistry active.
Safety Instructions:
-
Verify 24V series wiring and DC polarity carefully before connecting battery leads to the inverter; never mix old and new batteries or different Ah capacities in a 24V bank.
-
Never connect high-wattage inductive or heating appliances such as air conditioners, geysers, electric irons, microwaves, or water pumps to the inverter circuit.
-
Switch off the front power button and disconnect both AC mains and battery terminals before performing any electrical servicing.
-
Keep the battery bank and inverter away from open flames, sparks, and children.
FAQ Section
Q: What is the price of Luminous Eco Watt 1650 in Bangladesh?
A: The price of the Luminous Eco Watt 1650 (1500VA / 1260W) 24V inverter unit in Bangladesh typically ranges between BDT 14,700 and BDT 19,000, depending on current import duties and stock availability. Check the top of this product page on loopshop.com.bd for the exact live price and ongoing offers.
Q: Where can I buy Luminous Eco Watt 1650 in Bangladesh?
A: You can order the genuine Luminous Eco Watt 1650 online directly from loopshop.com.bd with fast home delivery across Dhaka, Chattogram, Sylhet, Khulna, Rajshahi, and all districts in Bangladesh, backed by official warranty support.
Q: What warranty does this product have?
A: The Luminous Eco Watt 1650 inverter unit comes with a 24-month (2-year) warranty covering manufacturing defects and internal electronic faults.
Q: Is this suitable for Bangladesh climate?
A: Yes. Engineered for South Asian operating conditions, its intelligent thermal management system, ventilated enclosure, and low-voltage battery charging capability (from 100V–110V AC) make it well suited for Bangladesh’s warm climate and fluctuating utility grid.
Q: How to install this product?
A: Wire two identical 12V batteries in series to create a 24V DC bank, connect the inverter’s positive (+) and negative (-) DC leads to the open battery terminals, set the rear battery-type selector switch, plug the input cord into a grounded 220V wall socket, and connect your backup load line. Professional electrician installation is recommended for 24V series wiring and distribution board integration.
Q: Are batteries included with the Luminous Eco Watt 1650?
A: No, the listed price covers the Luminous Eco Watt 1650 inverter unit only. Two compatible 12V batteries (e.g., two 12V 150Ah or 200Ah batteries) must be purchased separately.
Q: Why does this model require two batteries?
A: Because it operates on a 24V DC system (2 x 12V batteries in series). A 24V architecture reduces DC current draw at 1260W output, improves electrical efficiency, and provides significantly longer backup hours than single-battery units.
Q: How many fans and lights can 1260W run simultaneously?
A: With a 1260W rated capacity, it can comfortably power 5 to 6 ceiling fans, 8 to 10 LED lights, 1 LED TV, and 1 Wi-Fi router simultaneously. For optimal reliability, keep total continuous load below 75%–80% of rated capacity (around 950W–1000W).
Q: Which battery size works best with the Luminous Eco Watt 1650?
A: It supports Tubular, Flat Plate, SMF/VRLA, and Local 12V batteries. Pairing it with two 12V 150Ah or two 12V 200Ah Tall Tubular batteries provides long backup runtime and maximum lifespan in Bangladesh.
Q: Can I run Wi-Fi routers and computers on this IPS?
A: Yes. Switching the rear selector to UPS Mode regulates output voltage between 180V and 260V with a transfer time under 20 milliseconds, keeping Wi-Fi routers, laptops, and POS terminals running without restarting.

Reviews
There are no reviews yet.