Description
The Luminous Shakti Charge 1150 is a microprocessor-based 900VA (756W) single-battery IPS and Home UPS inverter designed to bridge utility grid interruptions seamlessly. Operating on a 12V DC battery bank, the unit converts stored DC energy into 220V–230V AC output while maintaining intelligent multi-stage charging whenever mains power is available.
It is built specifically for homeowners, retail shopkeepers, remote workers, and small office operators who require dependable backup power without complex multi-battery wiring. Across Bangladesh—where residential feeders frequently suffer from load shedding and low-voltage brownouts—the Shakti Charge 1150 maintains full charging current down to 90V–95V AC input, eliminating the need for an external voltage stabilizer.
Key Features
-
900VA / 756W Rated Capacity: Comfortably powers 3 to 4 ceiling fans, 5 to 8 LED lights, a television, and a Wi-Fi router simultaneously.
-
Low-Voltage Fast Charging (LVFC): Delivers high charging current even under severe low-voltage conditions (90V–95V AC), ensuring rapid battery recovery between frequent power cuts.
-
In-Built Battery Gravity Builder: Restores specific gravity in deeply discharged lead-acid cells, preventing premature sulfation and capacity loss.
-
3-Mode Battery Selector: Dedicated charging profiles tailored for Tubular, Flat Plate, and Local/SMF batteries.
-
Dual Charging Current Selection: Allows installers to match the charging current (up to 16A–17A) to the connected battery’s Ah rating.
-
ECO & UPS Mode Switch: UPS mode regulates output within 180V–260V for desktop PCs and routers, while ECO mode widens the mains window (90V–290V) to minimize unnecessary battery cycling.
-
Comprehensive Electronic Protections: Safeguards both the inverter and connected loads against overload, short circuit, deep discharge, overcharging, and reverse battery polarity.
Technical Advantages
-
High Charging Efficiency Under Brownouts: Conventional IPS units stop charging when mains voltage dips below 140V. The Shakti Charge 1150 sustains full charging performance down to 90V–95V, directly solving one of Bangladesh’s most common grid challenges.
-
Adaptive Battery Management: Microprocessor-controlled charging curves adjust voltage and current stages automatically based on battery condition, maximizing battery lifespan.
-
Robust Thermal & Overload Protection: Built-in auto-reset overload circuitry and thermal management protect internal MOSFETs and transformer windings during inductive startup surges.
-
Fast Transfer Time: Sub-20 millisecond changeover prevents router reboots and sudden desktop shutdowns when operating in UPS mode.
-
Low Maintenance Architecture: Intuitive front-panel LED indicators display mains status, charging state, backup mode, overload, and low-battery warnings for effortless monitoring.
Applications
-
Residential: Apartments, single-family homes, and village residences running ceiling fans, LED lighting, televisions, and internet routers.
-
Commercial: Retail shops, pharmacies, diagnostic sample collection booths, and POS billing counters.
-
Office: Small corporate offices, coworking desks, workstations, and networking closets.
-
Project Installation: Small-scale backup power retrofits for telecom repeaters, CCTV security hubs, and educational classrooms.
Why Choose This Product?
-
Proven Reliability: Manufactured by Luminous Power Technologies, one of South Asia’s most established power electronics brands.
-
Engineered for Local Grid Conditions: Low-voltage charging and deep-discharge recovery directly address erratic grid voltage and prolonged outage cycles.
-
Cost-Effective Single-Battery Setup: Delivers 756W of usable output from a single 12V battery, lowering initial battery capital cost compared to 24V dual-battery systems.
-
Dedicated After-Sales Support: Backed by a 2-year warranty and nationwide spare parts and service availability through loopshop.com.bd.
Technical Specification Table
| Specification | Details |
| Model | Shakti Charge 1150 (Shakti Charge+ 1150) |
| Brand | Luminous |
| Rated Power | 900 VA / 756 W |
| Voltage | 12V DC (Single Battery) |
| Current | Max Charging Current: 16A–17A |
| Frequency | 50 Hz ± 0.5 Hz |
| Efficiency | >80% (Battery Mode) |
| Protection | Overload, Short Circuit, Reverse Polarity, Deep Discharge, Overcharge |
| Dimension | 40.2 x 24.0 x 13.2 cm (402 x 240 x 132 mm) |
| Weight | 10.4 kg – 10.8 kg |
| Operating Temperature | 0°C to 45°C |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 900VA / 756W continuous load capacity on a single 12V battery
-
✓ Full-current battery charging even at 90V–95V low AC mains input
-
✓ In-built Battery Gravity Builder for deeply discharged battery recovery
-
✓ User-selectable 3-mode battery type switch (Tubular, Flat Plate, Local/SMF)
-
✓ Dual-stage charging current selector for optimal battery matching
-
✓ Switchable UPS Mode (180V–260V) and ECO Mode (90V–290V)
-
✓ Fast changeover time (less than 20 milliseconds) for uninterrupted IT loads
-
✓ Comprehensive electronic protection against overload, short circuit, and reverse polarity
-
✓ 6 clear LED system status indicators for real-time fault diagnostics
Benefits For Customers
-
Eliminates External Stabilizer Costs: Charges efficiently at mains voltages as low as 90V–95V AC, saving the expense of a separate voltage stabilizer.
-
Extends Battery Lifespan: Adaptive multi-stage charging and the integrated gravity builder prevent sulfation and premature battery failure.
-
Uninterrupted Work & Connectivity: Sub-20ms transfer time in UPS mode keeps Wi-Fi routers, desktop computers, and POS terminals running without rebooting.
-
Lower Initial System Cost: Requires only one 12V battery (100Ah–200Ah) instead of two batteries, reducing upfront investment.
-
Built for Bangladesh Grid Realities: Engineered to withstand frequent load shedding, low-voltage rural feeders, and high ambient temperatures up to 45°C.
Installation & Maintenance Guide
Installation Requirements:
-
Install the unit indoors in a cool, dry, well-ventilated location away from direct sunlight, rain, or moisture.
-
Maintain at least 15 cm of clearance around all ventilation vents to ensure proper heat dissipation.
-
Connect only a single 12V lead-acid battery (recommended capacity: 120Ah to 200Ah) using heavy-duty pure copper battery cables with tight lug terminations.
-
Set the rear battery-type selector switch (Tubular / Flat Plate / Local) and charging current switch to match your connected battery specifications before powering on.
-
Ensure the AC input wall socket has proper earthing and is protected by an appropriately rated MCB.
Maintenance Tips:
-
Inspect battery terminals every 2 to 3 months; clean any white or bluish sulfation buildup and apply petroleum jelly to prevent corrosion.
-
For flooded Tubular or Flat Plate batteries, check distilled water levels monthly and top up strictly with demineralized/distilled water—never tap water or acid.
-
Wipe dust from the inverter casing and cooling vents regularly using a dry cloth to prevent thermal buildup.
-
Run a brief battery discharge cycle once a month if grid outages are infrequent to keep battery chemistry active.
Safety Instructions:
-
Always verify DC polarity (Red to Positive
+, Black to Negative-) before connecting battery cables. -
Never connect high-wattage inductive or heating appliances such as air conditioners, geysers, electric irons, induction cookers, or water pumps to the inverter output.
-
Disconnect both AC mains input and battery terminals before performing any wiring modifications or servicing.
-
Keep the unit and battery bank out of reach of children and away from open flames or sparks.
FAQ Section
Q: What is the price of Luminous Shakti Charge 1150 in Bangladesh?
A: The price of the Luminous Shakti Charge 1150 (900VA / 756W) IPS/UPS inverter unit in Bangladesh typically ranges between BDT 11,200 and BDT 14,500, depending on current import duties and market availability. Check the top of this product page on loopshop.com.bd for the latest live price and ongoing offers.
Q: Where can I buy Luminous Shakti Charge 1150 in Bangladesh?
A: You can order the genuine Luminous Shakti Charge 1150 online directly from loopshop.com.bd with fast nationwide delivery across Dhaka, Chattogram, Sylhet, Khulna, Rajshahi, and all districts in Bangladesh, backed by official warranty support.
Q: What warranty does this product have?
A: The Luminous Shakti Charge 1150 inverter unit comes with a 2-year (24-month) manufacturer/brand warranty covering internal electronic and transformer defects.
Q: Is this suitable for Bangladesh climate?
A: Yes. It is rated to operate reliably in ambient temperatures from 0°C to 45°C and features low-voltage charging down to 90V–95V AC, making it specifically suited for Bangladesh’s hot, humid climate and fluctuating utility grid.
Q: How to install this product?
A: Place the inverter in a ventilated indoor area, connect the red DC cable to the + terminal and black DC cable to the - terminal of a single 12V battery, select the correct battery type on the rear switch, plug the AC input cord into a grounded 220V wall socket, and connect your backup load line to the output socket. Professional electrician installation is recommended for home distribution board integration.
Q: Does the price include the battery?
A: No, the listed price covers the Luminous Shakti Charge 1150 inverter unit only. A compatible 12V battery (100Ah–200Ah) must be purchased separately.
Q: What appliances can the 756W capacity run simultaneously?
A: With a 756W maximum load rating, it can comfortably power 3 to 4 ceiling fans, 5 to 6 LED lights, one LED TV, and a Wi-Fi router at the same time. Keep total running load below 75%–80% of rated capacity for optimal performance.
Q: What size and type of battery is best for the Shakti Charge 1150?
A: It supports 12V Tall Tubular, Flat Plate, SMF, and Local batteries ranging from 100Ah to 200Ah. For long backup hours and maximum lifespan in Bangladesh, a 12V 150Ah or 200Ah Tall Tubular battery is recommended.
Q: Can I run a desktop computer or Wi-Fi router on this IPS?
A: Yes. By switching the rear selector to UPS Mode, the inverter maintains a regulated output voltage (180V–260V) with a transfer time under 20 milliseconds, keeping desktop PCs and Wi-Fi routers running smoothly without restarting.
Q: Can it charge a battery when grid voltage is very low?
A: Yes. Its Low-Voltage Fast Charging (LVFC) circuit delivers full charging current even when input AC voltage drops as low as 90V–95V, ensuring your battery charges properly during severe brownouts.

Reviews
There are no reviews yet.