Description
Product Overview
What is this product?The OS&Y Valve Tamper / Supervisory Switch (available in Shield SD-SVS OSY Series, Potter OSYSU Series, and Gala OSY-G1) is an electromechanical monitoring device designed for fire sprinkler and hydrant supply lines. It continuously supervises the fully open status of Outside Screw and Yoke (OS&Y) gate valves.
How does it work?The switch mounts directly onto the yoke of an OS&Y gate valve, with its spring-loaded trip rod resting inside a machined groove on the rising valve stem. If someone begins closing the valve—within just two handwheel revolutions—the rising or lowering stem pushes the trip rod out of the groove, actuating internal SPDT micro-switches to send a supervisory trouble signal to the Fire Alarm Control Panel (FACP).
Who needs this product? MEP contractors, fire protection engineers, facility managers, compliance officers, and factory owners managing automated sprinkler networks, fire pump rooms, and riser manifolds.
Why is it useful in Bangladesh? Accidental or unauthorized closure of main water control valves is a primary cause of sprinkler system failure during industrial fires. In Bangladesh’s RMG factories, textile mills, commercial high-rises, and economic zones, UL/FM-certified supervisory switches are mandatory to pass BNBC (Bangladesh National Building Code), FSCD (Fire Service and Civil Defence), and RSC / Nirapon safety audits.
Key Features
-
UL Listed & FM Approved: Meets international fire protection standards (NFPA 13, NFPA 13R, NFPA 13D, and NFPA 72) for life-safety installations.
-
Rapid 2-Turn Detection: Triggers a supervisory signal within two revolutions of the valve handwheel or before the stem moves one-fifth of its travel distance.
-
Dual/Single SPDT Contacts: Available with single or dual synchronized SPDT (Form C) contacts to simultaneously signal the main FACP and auxiliary local bells or BMS.
-
Tamper-Resistant Enclosure: Equipped with special security screws (and cover tamper switch options) to prevent unauthorized disassembly or vandalism.
-
Wide Valve Size Compatibility: Adjustable mounting bracket and trip rod fit most 2″ to 12″ (50 mm to 300 mm) OS&Y gate valves, with adaptability down to 1/2″ valves.
-
Indoor & Outdoor Weather Protection: Rugged corrosion-resistant die-cast metal or heavy-duty NEMA 3R / NEMA 4 housing suitable for wet pump rooms and outdoor risers.
Technical Advantages
-
High Operational Reliability: Precision-synchronized micro-switches housed in rugged terminal blocks ensure zero false alarms from pump room vibration while guaranteeing instant actuation on valve movement.
-
Durable Corrosion-Resistant Construction: Powder-coated die-cast aluminum/metal body and corrosion-treated hardware withstand Bangladesh’s high monsoon humidity and industrial dust.
-
Active Tamper & Vandal Protection: Three-position switch mechanics detect both valve stem movement and unauthorized cover removal.
-
Zero Standby Power Consumption: Passive dry-contact switching draws zero standby current from the fire alarm loop, reducing FACP battery load.
-
Fast Installation & Easy Maintenance: Adjustable-length trip rods eliminate manual shaft cutting on site, and standard 1/2″ conduit entries simplify electrical termination.
Applications
-
Industrial & Factory: RMG garment factories, spinning/dyeing textile mills, pharmaceutical plants, and chemical warehouses.
-
Commercial: Shopping malls, corporate towers, hospitals, hotels, and convention centers.
-
Project Installation: Main fire pump rooms, sprinkler zone control assemblies (ZCA), standpipe risers, and underground hydrant valve chambers.
-
Residential: High-rise apartment complexes and gated residential communities governed by NFPA 13R / BNBC fire codes.
-
Office: IT parks, bank headquarters, and commercial office buildings.
Why Choose This Product?
-
Proven International Brands: Choose from globally trusted fire protection manufacturers—Shield, Potter, and Gala—all backed by verifiable UL and FM listings.
-
Audit-Ready Compliance: Eliminates compliance rejections during buyer, insurance, and FSCD fire safety inspections in Bangladesh.
-
Cost-Effective Asset Protection: Prevents catastrophic fire losses caused by unnoticed closed water supply valves at a fraction of overall sprinkler system cost.
-
Local Technical Support from Loop Shop: Supplied in Bangladesh with technical selection assistance, wiring guidance, and fast project delivery from loopshop.com.bd.
4. Technical Specification Table
| Specification | Details |
| Model | Shield SD-SVS OSY-1 / OSY-2 / OSY-3; Potter OSYSU-1 / OSYSU-2; Gala OSY-G1 |
| Brand | Shield / Potter / Gala |
| Rated Power | Dry Contact Switching (Passive Mechanical Switch) |
| Voltage | Up to 125/250V AC; 6/12/24V DC |
| Current | 10.0 A @ 125/250V AC; 2.0 A – 2.5 A @ 24V DC (Resistive) |
| Frequency | 50/60 Hz (AC Contact Rating) |
| Efficiency | Mechanical Actuation within ≤ 2 Handwheel Revolutions |
| Protection | UL Indoor/Outdoor Rated, NEMA 3R / NEMA 4 Weatherproof, Tamper-Resistant Cover Screws |
| Dimension | Approx. 146 mm × 89 mm × 82 mm (Varies slightly by brand/model) |
| Weight | 0.6 kg (Shield SD-SVS) to 1.3 kg (Potter / Standard Die-Cast Housing) |
| Operating Temperature | 0°C to 49°C (UL Listed range; up to 60°C for Gala OSY-G1) |
| Warranty | Manufacturer Standard Warranty (Up to 3 Years depending on brand/model) |
5. Features List
✓ UL Listed and FM Approved for fire sprinkler and hydrant supervision
✓ Triggers supervisory alarm within 2 turns of OS&Y valve handwheel
✓ Single or dual SPDT (Form C) high-capacity dry contacts
✓ Fits standard 2″ to 12″ OS&Y gate valves with adjustable actuator rod
✓ Weather-sealed NEMA 3R / NEMA 4 enclosure for indoor and outdoor use
✓ Tamper-resistant security cover screws prevent unauthorized access
✓ Standard 1/2″ conduit entry for fast, clean electrical installation
✓ Compliant with NFPA 13, NFPA 72, BNBC, and RSC safety standards
6. Benefits For Customers
-
Guarantees Fire System Readiness: Instantly alerts building security and facility teams if a main sprinkler valve is accidentally or maliciously shut off.
-
Ensures Smooth Audit & Insurance Approval: Satisfies strict UL/FM component requirements for garment factory audits (RSC/Nirapon), FSCD licensing, and industrial fire insurance.
-
Reduces Installation Labor Time: Pre-assembled yoke brackets and adjustable-length trip rods eliminate field cutting and complex conduit bending.
-
Built for Bangladesh Climate: Sealed enclosures and corrosion-resistant finishes protect internal contacts from monsoon moisture, condensation, and industrial dust.
-
Minimizes Maintenance Overhead: Robust mechanical design requires zero routine calibration or consumables over its service life.
7. Installation & Maintenance Guide
Installation Requirements:
-
Valve Preparation: Fully open the OS&Y gate valve so the rising stem reaches its maximum normal open position.
-
Stem Groove Alignment: Mark the valve stem where the trip rod contacts it and file a smooth groove (minimum 1/8″ deep, deburred) if the valve stem is not factory-grooved so the trip rod seats cleanly.
-
Bracket Mounting: Secure the mounting bracket onto the valve yoke using the supplied carriage bolts and clamp bar without obstructing handwheel rotation.
-
Conduit & Wiring: Use a 1/2″ weatherproof conduit connector. Wire the FACP supervisory monitor module across the Normally Open (NO) or Normally Closed (NC) terminals as required by your panel design, breaking/severing conductors at terminals for proper loop supervision (do not loop unbroken wires around screws).
Maintenance Tips:
-
Quarterly Functional Test: Partially close the OS&Y valve handwheel by 2 full turns during routine NFPA 25 inspections to verify that a supervisory trouble signal appears on the FACP, then reopen fully and confirm system restoration.
-
Visual & Seal Inspection: Inspect the conduit entry, housing gasket, and external trip rod every 6 months for dust buildup, corrosion, or mechanical binding.
-
Stem Lubrication: Keep the exposed OS&Y valve stem clean and lightly lubricated per valve manufacturer guidelines so the trip rod glides smoothly out of the groove.
Safety Instructions:
-
Coordinate Before Testing: Always notify the fire alarm monitoring station, facility security, and fire pump operator before testing supervisory switches to avoid false emergency responses.
-
De-Energize Circuits: Isolate FACP supervisory zone power or disconnect monitor modules before opening the switch housing or terminating wires.
-
Secure Cover Screws: Always reinstall the cover and tighten the tamper-resistant security screws after wiring or testing to maintain NEMA weatherproof integrity and anti-tamper protection.
8. FAQ Section
Q: What is the price of OS&Y Valve Tamper Switch in Bangladesh?
A: The price of a UL/FM-approved OS&Y Valve Tamper / Supervisory Switch in Bangladesh depends on the brand (Shield, Potter, or Gala) and contact configuration (single SPDT vs. dual SPDT with cover tamper). Contact loopshop.com.bd for the latest retail and bulk project pricing in BDT.
Q: Where can I buy UL/FM OS&Y Tamper Switch in Bangladesh?
A: You can purchase genuine UL Listed and FM Approved Shield, Potter, and Gala OS&Y valve supervisory switches online from loopshop.com.bd with nationwide delivery across Dhaka, Gazipur, Chattogram, Narayanganj, and all industrial zones.
Q: What warranty does this product have?
A: Manufacturer warranty coverage varies by brand and model (up to 3 years for Potter OSYSU series and standard manufacturer defect warranties for Shield and Gala).
Q: Is this suitable for Bangladesh climate?
A: Yes. These switches feature weatherproof NEMA 3R / NEMA 4 enclosures and corrosion-resistant housings designed to operate reliably in Bangladesh’s high humidity, heat, and dusty industrial pump rooms.
Q: How to install this product?
A: Fully open the OS&Y gate valve, clamp the mounting bracket onto the valve yoke, align the spring-loaded trip rod into the valve stem groove, connect the FACP supervisory circuit via the 1/2″ conduit entry, and verify signal activation within two handwheel turns.
Q: What is the difference between single SPDT and dual SPDT tamper switches?
A: Single SPDT models (e.g., Gala OSY-G1, Shield SD-SVS OSY-1) provide one Form C switch circuit for the Fire Alarm Control Panel, while dual SPDT models (e.g., Potter OSYSU-2, Shield SD-SVS OSY-2) provide two synchronized Form C circuits to simultaneously trigger both the FACP and a local bell or Building Management System (BMS).
Q: What valve sizes does this OS&Y supervisory switch fit?
A: The adjustable mounting bracket and trip rod fit most standard OS&Y gate valves from 2 inches to 12 inches (50 mm to 300 mm), and can also adapt to smaller valves down to 1/2 inch.
Q: Are Shield, Potter, and Gala tamper switches accepted by RSC, Nirapon, and FSCD in Bangladesh?
A: Yes, all three brands carry official UL Listing and FM Approval and comply with NFPA 13 and NFPA 72 standards required by BNBC, FSCD, RSC, and Nirapon auditors.
Q: Does this switch require an external 24V power supply to operate?
A: No. It is a passive mechanical dry-contact switch that simply opens or closes a circuit connected to your Fire Alarm Control Panel’s monitor module.
Q: Can this OS&Y tamper switch be installed outdoors?
A: Yes, when installed vertically with proper weatherproof 1/2″ conduit fittings, the NEMA 3R / NEMA 4 enclosure protects internal switches against rain and outdoor conditions.


Reviews
There are no reviews yet.