Description
The LVTOPSUN LVTS-256100-E is a high-efficiency 25.6V 100Ah (2.56kWh) Lithium Iron Phosphate (LiFePO4) deep-cycle battery housed in a durable, IP54-rated ABS casing. Engineered as a direct single-unit replacement for dual 12V lead-acid or tubular batteries in 24V power systems, it stores 2560Wh of nominal energy while weighing approximately 19 kg.
During grid availability or peak solar generation, the battery charges rapidly at up to 100A (Bulk Charge 28.0V / Float 27.6V). During power outages, its integrated Smart Battery Management System (BMS) regulates steady DC output up to 100A continuous discharge (2560W output), ensuring uninterrupted power for 24V solar inverters and high-capacity IPS/UPS units. It is specifically built for homeowners, solar EPC installers, IT managers, and commercial operators in Bangladesh needing reliable, space-saving backup power during daily load-shedding.
Key Features
-
25.6V 100Ah (2.56kWh) Energy Capacity: Provides 2560Wh nominal energy with 6,000 cycles at 80% Depth of Discharge (DoD, 25°C, 0.5C, 60% EOL).
-
Compact IP54 ABS Case: Non-conductive, rust-proof, and impact-resistant ABS enclosure (491 × 182 × 232 mm, ~19 kg) protects internal prismatic cells from dust and humidity.
-
100A Charge & 100A Discharge Rating: Supports up to 100A maximum charge current and 100A continuous discharge current (approx. 1,000A short-circuit protection threshold).
-
Built-in Smart BMS Protection: Automatically balances internal LiFePO4 cells and guards against over-voltage, under-voltage (23.2V cutoff), over-current, short circuits, and thermal extremes.
-
Series & Parallel Scalability: Supports connecting up to 4 units in parallel (up to 400Ah / 10.24kWh at 25.6V) or up to 2 units in series (for 51.2V / 48V solar inverter systems).
Technical Advantages
-
High Round-Trip Efficiency (>95%): Cobalt-free LiFePO4 chemistry minimizes internal resistance and energy loss during solar charging and inverter discharge.
-
Eliminates Inter-Battery Imbalance: Replaces two series-wired 12V batteries with a unified 25.6V pack managed by a single BMS, preventing voltage drift between separate battery units.
-
Durable IP54 Enclosure Construction: The sealed ABS case prevents moisture ingress (up to 95% RH) and eliminates external corrosion compared to metal enclosures.
-
Intrinsic Chemical & Electronic Safety: Lithium Iron Phosphate chemistry resists thermal runaway, reinforced by electronic BMS protection cutoffs (28.0V bulk / 23.2V discharge cutoff).
-
100% Maintenance-Free Operation: Sealed solid-state design eliminates distilled water refills, acid leaks, terminal sulfation, and corrosive fumes.
Applications
-
Residential: 24V home IPS/UPS backup systems, hybrid/off-grid rooftop solar installations, and multi-hour load-shedding backup.
-
Commercial: Retail showrooms, clinics, diagnostic centers, banks, and ATMs requiring silent indoor backup power.
-
Industrial: 24V DC control panels, PLC automation cabinets, and instrumentation backup systems.
-
Factory: Uninterrupted power for CCTV security surveillance networks, access control, and communication hardware.
-
Office: IT server racks, network switches, routers, and 24V office UPS systems.
-
Project Installation: Off-grid solar systems, telecom base stations, and remote renewable energy installations.
Why Choose This Product?
-
Single-Battery Convenience for 24V Systems: Eliminates the extra cabling, floor space, and balancing issues of pairing two 12V batteries for a 24V inverter or IPS.
-
Consistent Voltage Performance: Maintains a flat discharge voltage profile around 25.6V, keeping connected appliances and inverters running smoothly until the 23.2V cutoff.
-
Long-Term Cost Savings: 6,000-cycle durability and zero maintenance dramatically reduce per-cycle energy costs compared to replacing tubular batteries every 2–3 years.
-
Trusted Warranty & Local Support: Backed by a 6-year official manufacturer warranty and reliable technical support through loopshop.com.bd.
Technical Specification Table
| Specification | Details |
| Model | LVTS-256100-E |
| Brand | LVTOPSUN |
| Rated Power | 2560W Continuous Output (2.56kWh / 2560Wh Nominal Stored Energy) |
| Voltage | 25.6V Nominal (Bulk Charge: 28.0V; Float Charge: 27.6V; Low Voltage: 25.6V; Cutoff: 23.2V) |
| Current | Max Charge: 100A / Max Continuous Discharge: 100A (Short-Circuit Protection: ≈1,000A) |
| Frequency | DC System (0 Hz — Compatible with 50Hz/60Hz 24V Inverters) |
| Efficiency | >95% Round-Trip Efficiency (LiFePO4 Chemistry, 6,000 Cycles @ 80% DoD, 25°C, 0.5C, 60% EOL) |
| Protection | IP54 Enclosure + Smart BMS (Over-charge, Over-discharge, Over-current, Short-circuit & Temperature protection) |
| Dimension | 491 × 182 × 232 mm (W × D × H) |
| Weight | 19 kg |
| Operating Temperature | -20°C to 60°C (Humidity: ≤95% RH; Max Operating Altitude: ≤2,000m) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 25.6V 100Ah (2.56kWh) LiFePO4 deep-cycle battery with 6,000 cycles @ 80% DoD
-
✓ Lightweight 19 kg, IP54-rated, non-conductive ABS enclosure
-
✓ 100A fast charge current & 100A continuous discharge current (2560W)
-
✓ Integrated Smart BMS with cell balancing and full electrical/thermal protection
-
✓ Scalable up to 4 units in parallel or 2 units in series (for 51.2V systems)
-
✓ 100% maintenance-free single-unit replacement for dual 12V lead-acid batteries
Benefits For Customers
-
Reduces Electricity Waste: >95% round-trip efficiency and 100A charge acceptance capture maximum solar and grid power with minimal charging losses.
-
Improves Operational Reliability: Unified 25.6V architecture eliminates inter-battery voltage imbalance, preventing premature inverter low-voltage cutoffs.
-
Saves Maintenance & Replacement Cost: 6,000-cycle lifespan and sealed zero-maintenance construction eliminate distilled water purchases and frequent battery replacements.
-
Built for Bangladesh Environment: Wide -20°C to 60°C operating temperature range and IP54 moisture-resistant ABS housing withstand Bangladesh’s heat, humidity, and daily power cuts.
Installation & Maintenance Guide
Installation Requirements:
-
Place the battery upright on a level, dry, well-ventilated indoor surface or rack away from direct sunlight and heat sources.
-
Configure your 24V hybrid inverter, IPS, or solar charge controller charging parameters to 28.0V Bulk Charge, 27.6V Float Charge, and 23.2V Low-Voltage Cutoff.
-
Use properly sized copper battery cables (rated for 100A continuous current) and tighten terminal bolts securely.
Maintenance Tips:
-
Periodically check terminal bolts to ensure tight, clean connections free of dust or loose contacts.
-
Clean the ABS exterior with a dry or slightly damp cloth; avoid harsh chemical solvents.
-
For long-term storage, keep the battery at 50%–60% state of charge in a cool, dry location and recharge every 3 to 6 months.
Safety Instructions:
-
Never short-circuit the positive (+) and negative (-) terminals (short-circuit protection triggers at approx. 1,000A).
-
Do not puncture, crush, disassemble, or expose the ABS casing to open flames or excessive heat.
-
When wiring up to 4 units in parallel or up to 2 units in series, ensure all batteries are identical models balanced to the same voltage prior to connection.
FAQ Section
Q: What is the price of LVTOPSUN LVTS-256100-E 25.6V 100Ah Battery in Bangladesh?
A: In Bangladesh, the LVTOPSUN LVTS-256100-E typically retails between ৳44,500 and ৳49,000 depending on current stock, import batches, and ongoing promotions. Visit loopshop.com.bd for the latest real-time price.
Q: Where can I buy LVTOPSUN LVTS-256100-E in Bangladesh?
A: You can purchase the genuine LVTOPSUN LVTS-256100-E 25.6V 100Ah ABS Case Battery online at loopshop.com.bd with fast delivery across Dhaka, Chattogram, and nationwide across Bangladesh.
Q: What warranty does this product have?
A: The LVTOPSUN LVTS-256100-E comes with a 6-year official manufacturer warranty. Confirm exact warranty card coverage with loopshop.com.bd at checkout.
Q: Is this suitable for Bangladesh climate?
A: Yes. Built with an IP54 sealed ABS enclosure, ≤95% RH humidity tolerance, and a -20°C to 60°C operating temperature range, it performs reliably in Bangladesh’s hot, humid climate and daily load-shedding conditions.
Q: How to install this product?
A: Position the 19 kg battery on a dry, level rack, connect positive and negative terminals to a compatible 24V inverter or solar charge controller using properly rated copper cables, and set charging voltages to 28.0V bulk / 27.6V float.
Q: Can this single battery replace two 12V batteries on a 24V IPS or solar inverter?
A: Yes. Because its nominal voltage is 25.6V (24V class), a single LVTS-256100-E directly replaces two 12V batteries wired in series, saving space and eliminating inter-battery imbalance.
Q: How much energy does the LVTOPSUN LVTS-256100-E store?
A: At 25.6V nominal voltage and 100Ah capacity, it stores 2.56kWh (2560Wh) of electrical energy.
Q: What is the maximum inverter load this battery can support?
A: With a 100A continuous discharge rating at 25.6V, a single unit supports up to 2560W of continuous DC load.
Q: Can I connect multiple LVTS-256100-E batteries in series or parallel?
A: Yes. You can connect up to 4 units in parallel (up to 400Ah / 10.24kWh at 25.6V) or up to 2 units in series (for 51.2V / 48V solar inverter systems).
Q: What are the physical dimensions and weight of this battery?
A: The battery measures 491 × 182 × 232 mm (W × D × H) and weighs 19 kg, making it compact and easy to install.

Reviews
There are no reviews yet.