Description
The SUNSHINE 300W Germany Cell 12V Mono Bifacial Solar Panel (Model: SS-300W-M-B) is a high-efficiency dual-sided photovoltaic module engineered for demanding off-grid solar power systems. Built with high-purity Germany monocrystalline solar cells, Multi Busbar (MBB) design, and PID-free technology, it captures direct sunlight on the front side and reflected light on the rear side to generate dependable 12V direct current (DC) electricity.
This solar panel is ideal for homeowners, solar IPS users, commercial shops, farms, and off-grid project installers who want maximum energy output from limited rooftop space. In Bangladesh, where frequent load shedding requires fast battery recharging and tropical weather demands durable modules that perform during cloudy monsoon days, this 300W bifacial module delivers reliable daily power.
Key Features
-
Bifacial Dual-Side Generation: Harvests sunlight from both front and rear surfaces to increase overall energy yield over reflective rooftops and ground surfaces.
-
Germany Monocrystalline Cell Technology: High-purity solar cells engineered for superior photon capture and consistent conversion efficiency.
-
Multi Busbar (MBB) Architecture: Shortens current travel paths within the cells, lowering internal electrical resistance and reducing power loss.
-
PID-Free Protection: Prevents Potential Induced Degradation (PID), ensuring long-term voltage stability and consistent output across years of service.
-
High 12V Charging Current: Delivers 21.04V Maximum Power Voltage (Vmp) and 14.26A Maximum Power Current (Imp) for rapid 12V battery charging via MPPT or PWM controllers.
Technical Advantages
-
Higher Energy Yield: Combining bifacial light capture with MBB cell design generates extra power per square foot compared to standard monofacial panels.
-
Harsh Environment Durability: Built with salt mist and ammonia resistance within a sturdy 1720 × 760 × 35 mm frame for coastal, agricultural, and humid environments.
-
Electrical Safety & Positive Tolerance: Features a 0 ~ +5W positive power tolerance, 1000V maximum system voltage rating, and 20A maximum series fuse protection.
-
Strong Low-Light Performance: Continues producing steady charging current under overcast skies, haze, and early-morning/late-afternoon sunlight.
-
Low Maintenance: Solid-state photovoltaic module with no moving parts requires only periodic surface cleaning.
Applications
-
Residential: Home solar IPS systems, rooftop off-grid power setups, LED lighting, DC/AC fans, and load-shedding backup banks.
-
Commercial: Retail shops, pharmacies, clinics, and commercial backup battery banks.
-
Industrial: Remote telemetry stations, off-grid security systems, and low-voltage industrial control power.
-
Factory: Standalone perimeter lighting and emergency backup power circuits.
-
Office: Backup power for computers, routers, lights, and essential office electronics.
-
Project Installation: Off-grid cabins, rural electrification projects, agricultural solar setups, and hybrid inverter arrays.
Why Choose This Product?
-
Reliability: Engineered with PID-free Germany monocrystalline cells, Class A application rating, and salt-mist/ammonia resistance for dependable long-term operation.
-
Performance: Delivers 300W front-rated power (14.26A Imp) plus rear-side bifacial gain for faster daily battery recharging.
-
Cost Effectiveness: Maximizes power output per panel, reducing the total number of panels and mounting hardware required for off-grid systems.
-
After-Sales Value: Backed by genuine product sourcing, technical guidance, and nationwide delivery from LOOP Shop (
loopshop.com.bd).
Technical Specification Table
| Specification | Details |
| Model | SS-300W-M-B |
| Brand | SUNSHINE |
| Rated Power | 300W (0 ~ +5W Tolerance) |
| Voltage | 12V Nominal (Vmp: 21.04V, Voc: 24.62V, Max System: 1000V) |
| Current | Imp: 14.26A, Isc: 16.68A |
| Protection | PID-Free, Salt Mist & Ammonia Resistant, Max Series Fuse: 20A |
| Dimension | 1720 × 760 × 35 mm |
| Cell Technology | Germany Monocrystalline Bifacial Cell with Multi Busbar (MBB) |
| Application Class | Class A |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ Bifacial dual-side sunlight capture for higher power yield
-
✓ High-efficiency Germany monocrystalline solar cells
-
✓ Advanced Multi Busbar (MBB) design for lower resistance
-
✓ PID-free, salt mist, and ammonia resistant durability
-
✓ Excellent low-light performance during cloudy weather
Benefits For Customers
-
Reduces Electricity Cost: Generates high daily solar output to run home IPS, fans, lights, and appliances while cutting utility grid bills.
-
Improves Operational Reliability: Rapidly recharges 12V battery banks with 14.26A current so backup power stays ready during frequent load shedding.
-
Saves Maintenance Cost: Durable 35 mm framed bifacial construction with PID-free protection ensures minimal upkeep over decades.
-
Suitable for Bangladesh Environment: Salt mist resistance, ammonia resistance, and strong low-light efficiency make it ideal for Bangladesh’s coastal zones, rooftops, and monsoon climate.
Installation & Maintenance Guide
Installation Requirements:
-
Mount the panel in a shadow-free location facing south (for Bangladesh) at an optimal tilt angle, leaving open clearance underneath so reflected light can reach the rear bifacial surface.
-
Install over a light-colored or reflective rooftop surface where possible to maximize rear-side bifacial energy gain.
-
Connect the panel to an appropriately rated 12V MPPT or PWM solar charge controller (minimum 20A–30A rating recommended for 14.26A Imp) using UV-resistant DC solar cables.
Maintenance Tips:
-
Clean both the front and rear glass surfaces periodically with water and a soft cloth to remove dust, bird droppings, and debris so bifacial absorption remains unobstructed.
-
Inspect MC4 connectors, DC breakers, and mounting bolts regularly to ensure tight, corrosion-free connections.
Safety Instructions:
-
Cover the front surface of the solar panel with an opaque sheet during wiring installation to prevent live DC voltage generation.
-
Never connect the solar panel directly to a battery without a charge controller, ensure proper frame earthing/grounding, and avoid stepping on the glass surface.
FAQ Section
Q: What is the price of SUNSHINE 300W Germany Cell 12V Mono Bifacial Solar Panel in Bangladesh?
A: The price varies depending on market availability and order quantity (typically around BDT 9,300 to 9,900 in Bangladesh). Visit loopshop.com.bd or contact our sales team for the latest updated price.
Q: Where can I buy SUNSHINE 300W Germany Cell 12V Mono Bifacial Solar Panel in Bangladesh?
A: You can purchase the genuine SUNSHINE 300W 12V Mono Bifacial Solar Panel (Model: SS-300W-M-B) directly from LOOP Shop (loopshop.com.bd) with nationwide courier delivery across Bangladesh.
Q: What warranty does this product have?
A: The SUNSHINE SS-300W-M-B is backed by a 25-year linear power output warranty. Please confirm physical/transit inspection guidelines with LOOP Shop support when placing your order.
Q: Is this suitable for Bangladesh climate?
A: Yes, it features salt mist and ammonia resistance, PID-free cells, and strong low-light performance—making it well-suited for Bangladesh’s hot summers, coastal humidity, and cloudy monsoon days.
Q: How to install this product?
A: Secure the 1720 × 760 × 35 mm panel on a south-facing elevated frame free from shading (leaving space beneath for rear light reflection), wire it to a 12V MPPT/PWM charge controller, and connect the controller to your 12V battery.
Q: How does bifacial technology work on this 300W solar panel?
A: Unlike standard single-sided panels, a bifacial solar panel absorbs direct sunlight on its front surface while simultaneously capturing reflected and diffused light on its rear surface to increase total power generation.
Q: Which solar charge controller should I use with the SUNSHINE SS-300W-M-B?
A: Because this panel outputs 21.04V Vmp and 14.26A Imp (16.68A Isc), pair it with a 12V MPPT or PWM solar charge controller rated at 20A or 30A for safe and efficient battery charging.
Q: Can I use this 300W solar panel with a 12V IPS or inverter system?
A: Yes, it is widely used in Bangladesh to charge 12V tubular or lithium batteries connected to home solar IPS and off-grid inverter setups.
Q: What does PID-free technology mean for solar panel lifespan?
A: PID-free (Potential Induced Degradation-free) construction prevents voltage-induced power leakage between the solar cells and frame, preserving high conversion efficiency over decades.
Q: What are the dimensions of the SUNSHINE 300W bifacial solar panel?
A: The module measures 1720 × 760 × 35 mm, offering a rigid, weather-resistant frame engineered for rooftop and ground-mount installations.

Reviews
There are no reviews yet.