Jinko JKM650N-66QL6-BDV 650W Tiger Neo 3 Bifacial Solar Panel

  • High 650W N-Type TOPCon Output: Delivers 650Wp at STC (up to 724Wp at BNPI) with 24.06% module efficiency from 264 quarter-cut cells (66×4 layout).

  • 85 ± 5% Industry-Leading Bifaciality: Captures direct sunlight on the front and reflected roof or ground irradiance on the rear to maximize daily kWh yield.

  • Superior Heat & Weather Endurance: Features a low -0.26%/°C temperature coefficient, 2.0 + 2.0 mm dual-glass construction, and an IP68 junction box built for Bangladesh’s hot summers and heavy monsoons.

  • Ideal for Bangladesh Commercial & Utility Projects: Reduces Balance of System (BOS) mounting and DC cabling costs on factories, offices, and Net Metering rooftops.

  • 30-Year Performance Assurance: Backed by a 12-year product warranty and a 30-year linear power warranty with strong resistance to PID, LID/LeTID, and UV degradation.

Best Price Guaranteed

Description

The Jinko 650W Tiger Neo 3 (Model: JKM650N-66QL6-BDV) is a next-generation N-type TOPCon dual-glass bifacial solar PV module. Built with 264 quarter-cut N-type monocrystalline cells in a 66×4 layout, this module pairs a 24.06% front-side conversion efficiency with an 85 ± 5% bifaciality factor. While the front anti-reflective glass absorbs direct solar irradiance, the heat-strengthened rear glass harvests reflected light from white-coated roofs or ground surfaces—boosting total output up to 724W under BNPI conditions.

Engineered for commercial buildings, industrial factories, EPC contractors, and utility-scale solar developers, this module directly addresses high daytime electricity tariffs and roof-space constraints in Bangladesh. Whether deployed on large RMG factory sheds in Gazipur and Narayanganj or commercial complexes in Dhaka and Chattogram, the Jinko Tiger Neo 3 650W delivers higher energy density per square meter and faster Return on Investment (ROI).

Key Features

  • 650W Rated Power & 24.06% Efficiency: Produces 650Wp at STC (724Wp at BNPI) with a 0 to +3% positive power tolerance for guaranteed energy yield.

  • N-Type TOPCon Cell Technology: Eliminates Boron-Oxygen Light-Induced Degradation (LID) and enhances low-light sensitivity during early mornings, late afternoons, and overcast monsoon days.

  • 85 ± 5% High Bifaciality Factor: Maximizes rear-side power gain when installed over high-albedo surfaces such as white cool-roof coatings, concrete, or light gravel.

  • 2.0 + 2.0 mm Dual-Glass Encapsulation: Anti-reflective 2.0 mm front glass and 2.0 mm heat-strengthened rear glass enclosed in a 30 mm anodized aluminum alloy frame protect against moisture ingress, salt mist, ammonia, and PID.

  • High Mechanical Load & IP68 Protection: Certified to withstand 5400 Pa front static load and 2400 Pa rear wind load, equipped with an IP68-rated junction box.

  • 1500V DC System Voltage Support: Enables longer series strings, cutting DC cabling, combiner box, and installation labor expenses.

Technical Advantages

  • High Efficiency: At 24.06% module conversion efficiency, fewer panels are needed to achieve target megawatt or multi-kilowatt capacities compared to conventional PERC modules.

  • Durable Construction: Dual-glass encapsulation combined with a rigid anodized aluminum frame resists micro-cracking, UV aging, and coastal humidity.

  • Thermal & Safety Protection: A low power temperature coefficient of -0.26%/°C reduces voltage and wattage drop when roof temperatures exceed 45°C in summer, supported by a 35A maximum series fuse rating and IEC 61215:2021 / IEC 61730:2023 safety certifications.

  • Energy Saving: Strong low-irradiance performance extends productive generation hours each day, maximizing Bangladesh Net Metering export credits.

  • Easy Maintenance: Smooth anti-reflective coated front glass sheds monsoon rain cleanly and simplifies routine water washing during dry winter months.

Applications

  • Commercial: Shopping malls, hospitals, hotels, universities, and corporate buildings reducing daytime peak electricity bills.

  • Industrial & Factory: Garment (RMG) factories, textile mills, cold storages, and manufacturing plants deploying Net Metering rooftop arrays.

  • Office: Corporate headquarters and commercial office towers seeking reliable, clean daytime power.

  • Project Installation: Ground-mounted utility solar power plants, solar irrigation projects, and large-scale EPC installations.

  • Residential: High-consumption multi-story residential buildings with reinforced mounting structures and high-current MPPT inverters.

Why Choose This Product?

  • Reliability: Certified under IEC 61215:2021, IEC 61730:2023, IEC 61701 (Salt Mist), IEC 62716 (Ammonia), ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 for long-term outdoor durability.

  • Performance: Combines 264-cell TOPCon architecture with 85 ± 5% bifaciality and -0.26%/°C heat resistance for consistent real-world output.

  • Cost Effectiveness: High 650W output per module reduces mounting structure steel, clamps, DC wires, and installation labor costs per watt.

  • After-Sales Value: Backed by Jinko Solar’s 12-year product warranty and 30-year linear performance warranty for bankable long-term project security.

Technical Specification Table

Specification Details
Model JKM650N-66QL6-BDV (Tiger Neo 3)
Brand Jinko Solar
Rated Power 650W (STC) / 724W (BNPI)
Voltage Vmp: 42.57V | Voc: 50.26V | Max System Voltage: 1500V DC
Current Imp: 15.27A | Isc: 15.98A | Max Series Fuse Rating: 35A
Frequency DC Output Module (Inverter-dependent AC frequency)
Efficiency 24.06%
Protection IP68 Junction Box, 5400Pa Front / 2400Pa Rear Mechanical Load, IEC 61215:2021 & IEC 61730:2023 Certified
Dimension 2382 × 1134 × 30 mm
Weight 32.5 kg
Operating Temperature -40°C to +70°C (NOCT: 45°C | Temp. Coefficient Pmax: -0.26%/°C)
Warranty Official Manufacturer Warranty Applicable.

Features List

  • ✓ 650W high-efficiency N-type TOPCon bifacial operation (24.06% efficiency)

  • ✓ 85 ± 5% bifaciality factor delivering up to 724W under BNPI conditions

  • ✓ Advanced protection system with IP68 junction box and 1500V DC rating

  • ✓ 2.0 + 2.0 mm dual-glass build with 30-year linear performance warranty

  • ✓ Superior high-temperature (-0.26%/°C) and low-light performance

  • ✓ Easy installation and low maintenance with anti-reflective coated glass

Benefits For Customers

  • Reduces Electricity Cost: Generates high daytime solar yield per square meter to offset expensive commercial and industrial grid bills and maximize Bangladesh Net Metering export credits.

  • Improves Operational Reliability: N-type TOPCon cells resist PID, LID/LeTID, and UV degradation, maintaining steady output across decades of service.

  • Saves Maintenance & BOS Cost: Higher 650W density lowers total module count, mounting hardware, DC cabling, and routine cleaning labor.

  • Suitable for Bangladesh Environment: Dual-glass encapsulation, salt-mist/ammonia resistance, and low thermal degradation withstand high summer heat, heavy monsoon rains, and coastal humidity.

Installation & Maintenance Guide

Installation Requirements:

  • Mount on an anodized aluminum or hot-dip galvanized steel racking structure engineered for local wind loads, tilted south at approximately 20°–23° for Bangladesh.

  • To maximize the 85 ± 5% rear-side bifacial gain (up to 724W BNPI), install the panels on an elevated open rack above a white-coated or light-colored roof surface and keep mounting rails clear of the rear glass.

  • Verify inverter MPPT specifications against the module’s Voc (50.26V) and Imp (15.27A) so series string voltage stays safely below the inverter’s maximum DC limit and MPPT current is not clipped (pair with inverters rated for ≥16A per string).

Maintenance Tips:

  • Wash the front glass every 2 to 4 weeks during Bangladesh’s dry season (November–April) using clean water and a non-abrasive microfiber wiper to clear dust and bird droppings.

  • Clean early in the morning or after sunset when the glass surface is cool to prevent thermal shock.

  • Inspect JK03M / MC4 connectors, 4.0 mm² solar DC cables, and frame clamps every 6 months for tightness and weather integrity.

Safety Instructions:

  • Photovoltaic modules generate hazardous DC voltage whenever exposed to light; cover the front surface with an opaque sheet during electrical wiring or maintenance.

  • Never disconnect MC4 connectors under load.

  • Properly ground all aluminum frames and metallic mounting structures in compliance with BNBC (Bangladesh National Building Code) and IEC electrical safety standards.

FAQ Section

Q: What is the price of Jinko 650W Tiger Neo 3 JKM650N-66QL6-BDV Bifacial Solar Panel in Bangladesh?

A: The price of the Jinko 650W Tiger Neo 3 (JKM650N-66QL6-BDV) solar panel in Bangladesh depends on purchase volume (single unit vs. full pallet/project order) and prevailing import exchange rates. Contact loopshop.com.bd directly for the latest retail or commercial project quotation.

Q: Where can I buy Jinko 650W Tiger Neo 3 JKM650N-66QL6-BDV Bifacial Solar Panel in Bangladesh?

A: You can purchase genuine Jinko 650W Tiger Neo 3 (JKM650N-66QL6-BDV) bifacial solar panels online from loopshop.com.bd with safe nationwide delivery across Dhaka, Chattogram, Gazipur, Narayanganj, Sylhet, Khulna, and all districts in Bangladesh.

Q: What warranty does this product have?

A: It comes with a 12-year manufacturer product warranty covering materials and workmanship, plus a 30-year linear performance warranty backed by strong resistance to PID, LID/LeTID, and UV degradation.

Q: Is this suitable for Bangladesh climate?

A: Yes. Its low power temperature coefficient (-0.26%/°C) minimizes wattage loss during hot summer afternoons, while 2.0 + 2.0 mm dual-glass encapsulation, an IP68 junction box, and salt-mist/ammonia resistance protect against monsoon rain and coastal humidity.

Q: How to install this product?

A: Have a qualified solar engineer mount the panel on a corrosion-resistant frame tilted south at 20°–23° above a reflective surface, connect strings using 4.0 mm² solar DC cables and compatible connectors, pair with high-current MPPT inverters (≥16A per string), and properly ground all frames.

Q: What is N-type TOPCon technology in the Jinko Tiger Neo 3 650W panel?

A: N-type TOPCon (Tunnel Oxide Passivated Contact) uses phosphorus-doped silicon wafers with a passivated contact layer to reduce electron recombination, eliminate Light-Induced Degradation (LID), and boost efficiency to 24.06%.

Q: How much extra power does the 85% bifacial design generate?

A: With an 85 ± 5% bifaciality factor, rear-side irradiance boosts output up to 724W under BNPI test conditions, typically adding 5% to 20% extra real-world energy depending on roof reflectivity and mounting height.

Q: Is the JKM650N-66QL6-BDV suitable for Bangladesh Net Metering projects?

A: Yes, high-efficiency Jinko Tiger Neo 3 N-type bifacial modules are widely deployed in commercial and industrial Net Metering solar installations across Bangladesh.

Q: What inverter current rating is required for this 650W panel?

A: Because the panel has a Maximum Power Current (Imp) of 15.27A and Short-Circuit Current (Isc) of 15.98A, pair it with modern string or hybrid inverters supporting at least 16A to 20A MPPT input current per string.

Q: What are the physical dimensions and weight of one Jinko 650W panel?

A: Each module measures 2382 × 1134 × 30 mm and weighs 32.5 kg, requiring two technicians for safe lifting and roof installation.

 

Reviews

There are no reviews yet.

Be the first to review “Jinko JKM650N-66QL6-BDV 650W Tiger Neo 3 Bifacial Solar Panel”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581