AIKO AIKO-A650-GRH66Dw 650W Bifacial Solar Panel Commercial PV

  • High 650W Output & 24.06% Efficiency: Powered by 132 N-type ABC (All Back Contact) cells (6×22 layout) to deliver up to 650W STC and 700W BNPI bifacial energy yield.

  • Cell-Level Partial Shading Optimization: Minimizes power losses and prevents hotspot formation when nearby structures, pipes, or trees cast partial shadows across the array.

  • Tropical Heat & Monsoon Resilience: Features a low -0.26%/°C temperature coefficient and 2.0 + 2.0 mm dual-glass construction built for Bangladesh’s high summer temperatures and monsoon humidity.

  • Cost-Effective for Bangladesh Solar Projects: Ideal for residential rooftops, commercial buildings, and industrial factories, lowering mounting structure and DC cabling expenses.

  • Long-Term Warranty Security: Protected by a 15-year manufacturer product warranty and a 30-year linear performance warranty guaranteeing 88.85% output at Year 30.

Best Price Guaranteed

Description

The AIKO 650W Stellar 1N+66 (Model: AIKO-A650-GRH66Dw) is an advanced N-type All Back Contact (ABC) dual-glass bifacial solar PV module. Unlike traditional solar panels with metallic gridlines printed across the front surface, ABC technology moves 100% of electrical contacts to the rear side of the silicon cell. This eliminates front-side optical shading losses, maximizes sunlight capture, and absorbs reflected ground or rooftop light through its rear glass.

Built for homeowners, commercial building operators, industrial factory owners, and EPC solar contractors, this module addresses key energy challenges in Bangladesh. Whether installed on space-limited residential roofs in Dhaka and Chattogram or expansive RMG factory sheds in Gazipur and Narayanganj, the AIKO 650W Stellar 1N+66 generates more clean electricity per square meter while lowering overall Balance of System (BOS) costs.

Key Features

  • 650W Rated Power & 24.06% Efficiency: Delivers 650Wp at STC (and up to 700W at BNPI) with a 0 to +3% positive power tolerance to maximize rooftop energy density.

  • N-Type ABC (All Back Contact) Architecture: Grid-free front surface eliminates optical shading, resists Light-Induced Degradation (LID), and enhances micro-crack durability.

  • Partial Shading Optimization: Cell-level current bypass isolates shaded areas so unaffected cells continue operating at peak output, delivering up to 30% higher yield under partial shade.

  • Bifacial Dual-Glass Construction: Encapsulated in 2.0 + 2.0 mm coated semi-tempered glass with an anodized aluminum alloy frame to block moisture, salt mist, and PID.

  • High Mechanical & Environmental Protection: Certified for 5400 Pa front static load and 2400 Pa rear wind load, featuring an IP68 junction box with 3 bypass diodes.

  • 1500V DC System Compatibility: Supports longer series strings, reducing DC cabling, combiner box, and installation labor costs.

Technical Advantages

  • High Efficiency: At 24.06% module conversion efficiency, fewer panels are needed to reach your target kWp capacity compared to conventional PERC modules.

  • Durable Construction: Dual-glass encapsulation combined with a rigid 30 mm anodized aluminum frame ensures structural integrity over decades of outdoor exposure.

  • Safety & Thermal Protection: A low power temperature coefficient of -0.26%/°C reduces heat-induced voltage drop during peak summer afternoons, while Protection Class II and IEC Class A fire safety ratings safeguard buildings.

  • Energy Saving: High low-light responsiveness boosts generation during early mornings, late afternoons, and overcast monsoon days, increasing Bangladesh Net Metering export credits.

  • Easy Maintenance: Smooth, gridless front glass minimizes dust buildup and simplifies routine water cleaning during dry winter months.

Applications

  • Residential: High-capacity rooftop solar and hybrid inverter-battery systems for multi-story homes and duplexes.

  • Commercial: Shopping malls, hospitals, hotels, and universities aiming to cut daytime peak electricity bills.

  • Industrial & Factory: Garment (RMG) factories, textile mills, cold storages, and manufacturing plants deploying Net Metering rooftop arrays.

  • Office: Corporate towers and commercial office buildings seeking clean, reliable daytime power.

  • Project Installation: Ground-mounted utility solar power plants, solar irrigation systems, and large-scale EPC projects.

Why Choose This Product?

  • Reliability: Tested and certified to IEC 61215, IEC 61730, ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 standards for long-term operational stability.

  • Performance: Maintains superior real-world output under high ambient heat, low irradiance, and partial roof shading.

  • Cost Effectiveness: High wattage per module lowers mounting rail, clamp, DC wire, and installation labor costs per watt.

  • After-Sales Value: Backed by a 15-year product warranty and a 30-year linear performance warranty with ≤1% first-year degradation and ≤0.35% annual degradation thereafter.

Technical Specification Table

Specification Details
Model AIKO-A650-GRH66Dw (Stellar 1N+66)
Brand AIKO Solar
Rated Power 650W (STC) / 700W (BNPI)
Voltage Vmp: 42.00V | Voc: 49.30V | Max System Voltage: 1500V DC
Current Imp: 15.48A | Isc: 16.62A | Max Series Fuse Rating: 30A
Frequency DC Output Module (Inverter-dependent AC frequency)
Efficiency 24.06%
Protection IP68 Junction Box (3 Bypass Diodes), Protection Class II, IEC Class A Fire Rating, 5400Pa Front / 2400Pa Rear Load
Dimension 2382 × 1134 × 30 mm
Weight 32.5 kg (±3%)
Operating Temperature -40°C to +85°C (Temp. Coefficient Pmax: -0.26%/°C)
Warranty Official Manufacturer Warranty Applicable.

Features List

  • ✓ 650W high-efficiency N-type ABC bifacial operation (24.06% efficiency)

  • ✓ Cell-level partial shading optimization with hotspot suppression

  • ✓ Advanced protection system with IP68 junction box and 1500V DC rating

  • ✓ 2.0 + 2.0 mm dual-glass construction for 30-year service life

  • ✓ Superior high-temperature (-0.26%/°C) and low-light performance

  • ✓ Easy installation and low maintenance with anti-reflective coated glass

Benefits For Customers

  • Reduces Electricity Cost: Generates maximum clean energy per square meter to offset expensive residential, commercial, and industrial grid tariffs.

  • Improves Operational Reliability: Continues delivering stable power even when nearby water tanks, parapet walls, or trees cast partial shadows.

  • Saves Maintenance & BOS Cost: Higher wattage per panel reduces total module count, mounting hardware, DC cabling, and cleaning effort.

  • Suitable for Bangladesh Environment: Dual-glass encapsulation and low thermal loss withstand intense summer heat, monsoon rains, dust, and coastal humidity.

Installation & Maintenance Guide

Installation Requirements:

  • Mount on an anodized aluminum or hot-dip galvanized steel racking frame engineered for local wind loads, tilted south at approximately 20°–23° for Bangladesh.

  • To capture rear-side bifacial energy (up to 700W BNPI), elevate the modules above a white-coated or light-colored roof surface and keep mounting rails clear of the rear cell area.

  • Verify inverter MPPT specifications against the module’s Voc (49.30V) and Imp (15.48A) so series string voltage stays safely below the inverter’s maximum DC input limit and MPPT current is not clipped.

Maintenance Tips:

  • Wash the front glass every 2 to 4 weeks during Bangladesh’s dry season (November–April) using clean water and a non-abrasive microfiber wiper to remove dust and bird droppings.

  • Clean early in the morning or after sunset when the glass surface is cool to prevent thermal shock.

  • Inspect MC4 connectors, 4mm² DC cables, and mounting clamps every 6 months for tightness and weather integrity.

Safety Instructions:

  • Solar panels generate hazardous DC voltage whenever exposed to light; cover the front surface with an opaque sheet during wiring or maintenance.

  • Never disconnect MC4 connectors under electrical load.

  • Properly ground all aluminum frames and mounting structures in compliance with BNBC and IEC electrical safety standards.

FAQ Section

Q: What is the price of AIKO 650W Stellar 1N+66 Bifacial Solar Panel in Bangladesh?

A: The price of the AIKO 650W Stellar 1N+66 (AIKO-A650-GRH66Dw) solar panel in Bangladesh varies based on order quantity (single piece vs. full pallet/project volume) and prevailing import exchange rates. Contact loopshop.com.bd directly for the latest retail or commercial project quotation.

Q: Where can I buy AIKO 650W Stellar 1N+66 Bifacial Solar Panel in Bangladesh?

A: You can buy authentic AIKO 650W Stellar 1N+66 (AIKO-A650-GRH66Dw) bifacial solar panels online from loopshop.com.bd with fast, secure delivery across Dhaka, Chattogram, Gazipur, Sylhet, Khulna, and nationwide.

Q: What warranty does this product have?

A: It includes a 15-year manufacturer product warranty covering materials and workmanship, plus a 30-year linear performance warranty guaranteeing at least 88.85% of nominal output at Year 30.

Q: Is this suitable for Bangladesh climate?

A: Yes. Its low -0.26%/°C temperature coefficient minimizes power loss in hot summer weather, while 2.0 + 2.0 mm dual-glass encapsulation and an IP68 junction box protect against heavy monsoon rain and high humidity.

Q: How to install this product?

A: Have a certified solar engineer mount the panel on a corrosion-resistant frame tilted south at 20°–23° above a reflective surface, connect strings using 4mm² solar DC cables and MC4-compatible connectors, and ensure proper earthing.

Q: What is N-type ABC technology in the AIKO 650W panel?

A: ABC stands for All Back Contact. All metallic busbars and electrical contacts are relocated to the rear of the solar cell, leaving the front glass completely free of gridlines for superior light absorption and 24.06% efficiency.

Q: How does partial shading optimization benefit this solar panel?

A: Unlike conventional modules where shading one cell drags down the entire cell string, AIKO’s cell-level optimization bypasses shaded cells smoothly, delivering up to 30% higher energy yield under partial shade.

Q: Is the AIKO-A650-GRH66Dw suitable for Bangladesh Net Metering systems?

A: Yes, its high 650W capacity and 24.06% efficiency make it ideal for residential, commercial, and industrial Net Metering solar installations across Bangladesh.

Q: What inverter MPPT current rating is required for this 650W panel?

A: With a Maximum Power Current (Imp) of 15.48A and Short-Circuit Current (Isc) of 16.62A, pair this panel with modern string or hybrid inverters supporting at least 16A+ MPPT input current per string.

Q: What are the physical dimensions and weight of the AIKO 650W Stellar 1N+66 panel?

A: Each module measures 2382 × 1134 × 30 mm and weighs 32.5 kg (±3%).

Reviews

There are no reviews yet.

Be the first to review “AIKO AIKO-A650-GRH66Dw 650W Bifacial Solar Panel Commercial PV”

Your email address will not be published. Required fields are marked *

We Don't Just Sell Products, We Deliver Complete Solutions.

From planning to handover – Loop Shop is your single point MEP partner.

Expert Consultant

Get advised from our MEP Specialist

Supply & Installation

Professional installation by certified engineers

Testing & Commissioning

Ensuring system works perfectly

After Sales Support

AMC & 24/7 technical support

Have Project in Mind?

Get free and consultations and quotation for your project. 

Need Help Deciding?

Leave your number and we'll contact you with the best offer.


Notice: ob_end_flush(): Failed to send buffer of zlib output compression (0) in /home/loopshop/public_html/wp-includes/functions.php on line 5581