Description
The AIKO 665W Stellar 3N+72 (Model: AIKO-A665-MDE72Dw) is a third-generation N-type All Back Contact (ABC) dual-glass bifacial solar PV module. Unlike conventional solar panels that place silver busbars across the front glass, ABC technology relocates 100% of electrical contacts to the rear side of the silicon wafer. This eliminates front-surface optical shading, allowing maximum sunlight absorption while capturing reflected light from the rear glass.
Engineered for homeowners, commercial building operators, factory owners, and solar EPC contractors, this module directly solves space and heat challenges in Bangladesh. Whether installed on space-constrained urban rooftops in Dhaka and Chattogram or large steel-shed factories in Gazipur and Narayanganj, the AIKO 665W Stellar 3N+72 delivers higher daily energy yield and faster return on investment.
Key Features
-
665W Rated Power & 24.8% Efficiency: Produces 665Wp at STC with a 0 to +3% positive power tolerance, squeezing maximum wattage from limited roof area.
-
N-Type ABC (All Back Contact) Cells: Grid-free front surface eliminates optical shading, prevents Light-Induced Degradation (LID), and enhances micro-crack resistance.
-
Partial Shading Optimization: Cell-level current bypass restricts shading losses strictly to shaded cells rather than dragging down the entire string.
-
Bifacial Dual-Glass Design: Encapsulated in 2.0 + 2.0 mm coated semi-tempered glass to capture rear albedo radiation (up to 700W BNPI) and block moisture and PID.
-
High Mechanical & Weather Resistance: Rated for 5400 Pa front static load and 2400 Pa rear wind load, equipped with an IP68 junction box and 3 bypass diodes.
-
1500V DC System Voltage Support: Enables longer series strings, cutting DC wiring, combiner box, and Balance of System (BOS) costs.
Technical Advantages
-
High Efficiency: At 24.8% module efficiency, fewer panels are required to hit your target kWp capacity compared to standard PERC or TOPCon modules.
-
Durable Construction: Dual-glass encapsulation combined with an anodized aluminum frame protects the 144 half-cut cells against high humidity, salt mist, and thermal stress.
-
Thermal & Safety Protection: A low temperature coefficient of -0.26%/°C preserves voltage and power output during 40°C+ summer afternoons, while Protection Class II and IEC Class A fire ratings ensure electrical safety.
-
Energy Saving: Strong low-light sensitivity boosts generation during early mornings, late afternoons, and overcast monsoon days, maximizing Bangladesh Net Metering exports.
-
Easy Maintenance: Smooth, gridless front glass reduces dust adhesion and makes routine water cleaning fast and effortless.
Applications
-
Residential: High-capacity rooftop solar and hybrid battery storage systems for multi-story homes and duplexes.
-
Commercial: Hospitals, hotels, shopping complexes, and educational institutions lowering daytime peak electricity bills.
-
Industrial & Factory: Garment (RMG) factories, textile mills, cold storages, and manufacturing plants utilizing Net Metering.
-
Office: Corporate buildings and IT parks seeking reliable daytime clean power backup.
-
Project Installation: Ground-mounted utility solar farms, solar irrigation pumps, and commercial EPC projects.
Why Choose This Product?
-
Reliability: Tested and certified to IEC 61215, IEC 61730, ISO 9001:2015, ISO 14001:2015, and ISO 45001:2018 standards for decades of outdoor durability.
-
Performance: Delivers up to 30% higher energy yield under partial shading conditions compared to conventional solar panels.
-
Cost Effectiveness: High power density lowers structural steel, mounting clamp, cable, and installation labor costs per watt.
-
After-Sales Value: Protected by a 15-year manufacturing warranty and a 30-year linear power warranty with ≤1% first-year degradation and ≤0.35% annual degradation thereafter.
Technical Specification Table
| Specification | Details |
| Model | AIKO-A665-MDE72Dw (Stellar 3N+72) |
| Brand | AIKO Solar |
| Rated Power | 665W (STC) / 700W (BNPI) |
| Voltage | Vmp: 45.09V | Voc: 55.20V | Max System Voltage: 1500V DC |
| Current | Imp: 14.75A | Isc: 15.45A | Max Series Fuse Rating: 30A |
| Frequency | DC Output Module (Inverter-dependent AC frequency) |
| Efficiency | 24.8% |
| Protection | IP68 Junction Box (3 Bypass Diodes), Protection Class II, IEC Class A Fire Rating, 5400Pa Front / 2400Pa Rear Load |
| Dimension | 2382 × 1134 × 30 mm |
| Weight | 32.2 kg (±3%) |
| Operating Temperature | -40°C to +70°C (Temp. Coefficient Pmax: -0.26%/°C) |
| Warranty | Official Manufacturer Warranty Applicable. |
Features List
-
✓ 665W high-efficiency N-type ABC bifacial operation (24.8% efficiency)
-
✓ Cell-level partial shading optimization with anti-hotspot protection
-
✓ Advanced protection system with IP68 junction box and 1500V DC rating
-
✓ 2.0 + 2.0 mm dual-glass construction for 30-year service life
-
✓ Superior high-temperature (-0.26%/°C) and low-light performance
-
✓ Easy installation and low maintenance with anti-reflective coated glass
Benefits For Customers
-
Reduces Electricity Cost: Generates maximum clean energy per square meter to offset expensive residential, commercial, and industrial grid bills.
-
Improves Operational Reliability: Maintains consistent power output even when nearby water tanks, chimneys, or trees cast partial shadows.
-
Saves Maintenance & BOS Cost: Fewer panels needed per kW reduces mounting structure, DC cable, and cleaning expenses.
-
Suitable for Bangladesh Environment: Built to endure high summer heat, heavy monsoon rainfall, dust, and humidity without premature degradation.
Installation & Maintenance Guide
Installation Requirements:
-
Mount on an anodized aluminum or hot-dip galvanized steel racking structure engineered for local wind loads, tilted south at approximately 20°–23° for Bangladesh.
-
To capture rear-side bifacial energy, elevate the panels above a light-colored or white-coated roof surface and keep mounting rails clear of the rear cell area.
-
Verify inverter MPPT specifications against the panel’s Voc (55.20V) and Imp (14.75A) so string voltage stays safely below the inverter’s DC limit and MPPT current is not clipped.
Maintenance Tips:
-
Wash the front glass every 2 to 4 weeks during Bangladesh’s dry season (November–April) using clean water and a soft microfiber wiper to clear dust and bird droppings.
-
Clean early in the morning or after sunset when the glass surface is cool to avoid thermal stress.
-
Check MC4 connectors, DC cables, and mounting bolts semi-annually for tightness and weather integrity.
Safety Instructions:
-
Photovoltaic modules generate hazardous DC voltage whenever exposed to sunlight; cover the front surface with an opaque sheet during wiring or servicing.
-
Never unplug MC4 connectors while the system is under load.
-
Properly ground all module frames and metal structures in accordance with BNBC and IEC electrical safety standards.
FAQ Section
Q: What is the price of AIKO 665W Stellar 3N+72 Bifacial Solar Panel in Bangladesh?
A: The price of the AIKO 665W Stellar 3N+72 (AIKO-A665-MDE72Dw) solar panel in Bangladesh depends on purchase quantity (single unit vs. full pallet/project order) and prevailing import rates. Contact loopshop.com.bd for the most accurate retail or bulk project price.
Q: Where can I buy AIKO 665W Stellar 3N+72 Bifacial Solar Panel in Bangladesh?
A: You can order authentic AIKO 665W Stellar 3N+72 (AIKO-A665-MDE72Dw) bifacial solar panels online from loopshop.com.bd with reliable delivery across Dhaka, Chattogram, Gazipur, Sylhet, Khulna, and nationwide.
Q: What warranty does this product have?
A: It comes with a 15-year manufacturer product warranty for materials and workmanship, plus a 30-year linear performance warranty guaranteeing at least 88.85% of nominal output at Year 30.
Q: Is this suitable for Bangladesh climate?
A: Yes. Its low -0.26%/°C temperature coefficient minimizes power drops in extreme summer heat, while 2.0 + 2.0 mm dual-glass encapsulation and an IP68 junction box withstand heavy monsoon rain and high humidity.
Q: How to install this product?
A: Have a qualified solar technician mount the panel on a corrosion-resistant frame tilted south at 20°–23° above a reflective surface, connect strings using 4mm² solar DC cables and MC4-compatible connectors, and ensure proper earthing.
Q: What is N-type ABC technology in the AIKO 665W panel?
A: ABC (All Back Contact) places all electrical busbars and contacts behind the solar cells. This leaves the front surface completely free of gridlines, boosting light absorption and achieving 24.8% module efficiency.
Q: How does partial shading optimization work on this solar panel?
A: Unlike standard modules where shading one cell slows down the entire cell string, AIKO’s cell-level optimization allows current to bypass shaded areas smoothly, yielding up to 30% more power in partially shaded conditions.
Q: Is the AIKO-A665-MDE72Dw suitable for Bangladesh Net Metering?
A: Yes, its high 665W power density and 24.8% efficiency make it ideal for residential, commercial, and industrial Net Metering systems in Bangladesh.
Q: What inverter current rating is needed for this 665W panel? A: With a Maximum Power Current (Imp) of 14.75A and Short-Circuit Current (Isc) of 15.45A, pair this panel with modern string or hybrid inverters supporting at least 15A–16A+ MPPT input current per string.
Q: What are the dimensions and weight of the AIKO 665W Stellar 3N+72 panel?
A: The module measures 2382 × 1134 × 30 mm and weighs 32.2 kg (±3%).

Reviews
There are no reviews yet.