Description
The Omron CS1W-CIF31 & CS1W-CN226 cable set is an essential programming interface combination designed to connect modern USB-equipped personal computers to Omron Programmable Logic Controllers (PLCs). The CS1W-CIF31 acts as a reliable USB-to-RS-232C converter module, while the CS1W-CN226 provides the direct physical connection interface to the dedicated peripheral port on Omron CS1, CJ1, CQM1H, and CPM2C series PLCs.
In Bangladesh’s industrial automation landscape, field maintenance engineers and commissioning specialists frequently use modern laptops that lack traditional DB9 serial ports. This genuine Omron cable set bridges the hardware gap, providing seamless communication with Omron PLCs for upload, download, real-time monitoring, and troubleshooting via CX-Programmer software without communication drops or signal distortion.
Key Features
- Dual Component Cable Set: Combines the CS1W-CIF31 USB converter unit with the CS1W-CN226 peripheral port programming cable.
- Universal USB Interface: Standard USB Type-A connection compatible with USB 1.1 and USB 2.0 laptop and desktop ports.
- Direct Peripheral Port Coupling: CS1W-CN226 end plugs directly into standard Omron PLC peripheral ports for low-latency communication.
- CX-One & CX-Programmer Ready: Fully recognized by Omron automation software packages including CX-Programmer, CX-Integrator, and SYSWIN.
- LED Status Indicators: On-board status LEDs display power and TX/RX communication activity for instant visual diagnostics.
- Bus-Powered Operation: Draws power directly from the host computer’s USB port, eliminating the need for external power adapters.
Technical Advantages
- High Efficiency Data Transfer: Delivers stable, high-speed baud rates without packet loss or communication timeout errors during firmware or ladder uploads.
- Durable Construction: Industrial-grade cable shielding and molded connector strain reliefs protect against signal interference (EMI/RFI) and physical field wear.
- Noise Immunity & Safety: Built-in surge protection safeguards both the connected laptop USB bus and the PLC logic port from noise spikes.
- Energy Saving: Highly efficient USB conversion chip consumes negligible bus power from the programming PC.
- Easy Maintenance: Driver-supported virtual COM port assignment makes setup quick and hassle-free across modern Windows operating systems.
Applications
- Industrial Automation: Programming, ladder uploading, downloading, and online monitoring of Omron CS1, CJ1, CQM1H, and CPM2C PLCs.
- Factory Floor Maintenance: Routine diagnostic checks, fault clearing, and parameter tuning in automated manufacturing plants across Bangladesh.
- Textile & Packaging Sector: Machine troubleshooting, line synchronization, and drive setup in spinning mills, weaving sheds, and high-speed packaging lines.
- Project Installation: Control cabinet commissioning and field testing by system integration engineers.
- Educational & R&D Labs: Practical PLC programming training and experimental lab setups in engineering institutions across Bangladesh.
Why Choose This Product?
- 100% Genuine Compatibility: Designed directly by Omron to guarantee flawless, drop-free communication with Omron software and PLC hardware.
- Time-Saving Reliability: Eliminates driver conflicts and connection errors common with cheap generic USB-to-serial adapters.
- Versatile Industry Standard: A single reliable tool kit that serves multiple series of Omron controllers used across various industries in Bangladesh.
- Local After-Sales Support: Available with verified quality assurance and fast nationwide delivery through loopshop.com.bd.
Technical Specification Table
| Specification | Details |
| Model | CS1W-CIF31 (USB Converter) & CS1W-CN226 (PLC Cable) |
| Brand | Omron |
| Rated Power | Bus-powered from PC USB port |
| Voltage | 5 VDC (from USB port) |
| Current | Not Available |
| Frequency | Not Available |
| Efficiency | High-speed RS-232C baud rate support |
| Protection | Built-in circuit protection against line surge |
| Dimension | CS1W-CIF31 Cable Length: Approx. 0.5 m | CS1W-CN226 Cable Length: Approx. 3.3 m |
| Weight | Approx. 250 g |
| Operating Temperature | 0°C to 55°C |
| Warranty | Standard Manufacturer Warranty |
Features List
✓ Complete USB to Omron PLC peripheral port programming set
✓ Includes CS1W-CIF31 converter and CS1W-CN226 PLC cable
✓ Fully compatible with Omron CX-Programmer and CX-One software
✓ Bus-powered directly from host PC USB port
✓ Shielded cable assembly resists industrial EMI noise
✓ Plug-and-play virtual COM port driver installation
Benefits For Customers
- Eliminates Hardware Incompatibility: Connects modern laptops directly to legacy and current Omron PLCs without serial port hardware.
- Improves Operational Efficiency: High-speed, stable communication speeds up program downloads and cuts down field commissioning time.
- Saves Maintenance Cost: Durable construction prevents cable breakage, protecting your diagnostic tools under rugged factory conditions.
- Suitable for Bangladesh Environment: Performs reliably in high ambient temperatures (0–55°C) typical of industrial environments across Bangladesh.
Installation & Maintenance Guide
Installation Requirements:
- PC Connection: Plug the USB Type-A connector of the CS1W-CIF31 into a free USB 2.0 or 3.0 port on your computer.
- Driver Setup: Install the official Omron CS1W-CIF31 USB driver (included with CX-One software suite) to generate a virtual COM port.
- PLC Connection: Connect the CS1W-CN226 cable end to the peripheral port of the target Omron PLC.
- Software Configuration: Open CX-Programmer, select the generated Virtual COM Port under Communications Settings, and initiate connection.
Maintenance Tips:
- Cable Care: Avoid sharp bends, heavy pinching, or placing heavy control panel doors on the cable body.
- Connector Protection: Keep dust caps on the peripheral port connector when not in use to keep dust and moisture away from gold pins.
- Driver Updates: Ensure your Windows OS virtual COM port drivers stay up to date with your CX-One software installation.
Safety Instructions:
- Always verify static grounding before connecting the cable to a running PLC on the factory floor.
- Do not pull or jerk the cable by the wire; always disconnect by holding the molded connector plug.
- Avoid exposing the cable to chemical solvents, cutting fluids, or direct water splashing.
Frequently Asked Questions (FAQ)
Q: What is the price of Omron CS1W-CIF31 & CS1W-CN226 Programming Cable in Bangladesh?
A: The price of the Omron CS1W-CIF31 & CS1W-CN226 cable set in Bangladesh varies depending on stock availability and import duties. For updated pricing and current stock status, check loopshop.com.bd or contact our customer support team.
Q: Where can I buy Omron CS1W-CIF31 & CS1W-CN226 in Bangladesh?
A: You can purchase the genuine Omron CS1W-CIF31 & CS1W-CN226 programming cable online at loopshop.com.bd with delivery options across Dhaka, Chittagong, Gazipur, Narayanganj, and nationwide.
Q: What warranty does this product have?
A: The product comes with a 1-year standard warranty against manufacturing defects when purchased from trusted automation suppliers like loopshop.com.bd.
Q: Is this suitable for Bangladesh climate?
A: Yes, it is rated for operation in ambient industrial temperatures from 0°C to 55°C and relative humidity levels from 10% to 90% (non-condensing), making it well-suited for industrial plants in Bangladesh.
Q: How to install this product?
A: Install the CS1W-CIF31 USB driver on your laptop, plug the USB end into your PC, connect the CS1W-CN226 end to the PLC peripheral port, select the corresponding COM port in CX-Programmer, and click “Online.”
Q: What Omron PLCs are compatible with the CS1W-CN226 cable?
A: The CS1W-CN226 connects directly to the peripheral ports of Omron CS1, CJ1, CJ2, CQM1H, and CPM2C series PLCs.
Q: Can I use the CS1W-CIF31 converter with other RS-232 cables?
A: Yes, the CS1W-CIF31 provides a standard RS-232C DB9 interface, allowing it to be used with other serial programming cables (like the XW2Z series) for different PLC or HMI models.
Q: Does this cable work with Windows 10 and Windows 11?
A: Yes, with the latest Omron USB drivers (supplied within CX-One or downloaded from Omron’s support portal), the CS1W-CIF31 works smoothly on Windows 10 and 11 (32-bit and 64-bit).
Q: Does loopshop.com.bd supply authentic Omron programming accessories?
A: Yes, loopshop.com.bd guarantees 100% authentic, tested, and reliable industrial automation tools, cables, PLCs, and sensors for Bangladesh’s industrial sector.
Q: What software is required to program Omron PLCs using this cable?
A: You can use Omron CX-Programmer (part of CX-One automation software) or legacy SYSWIN software to communicate with PLCs through this cable set.

Reviews
There are no reviews yet.